Operation Manual
English
99
DOWN button you can select the desired memory preset. If the current memory preset is
already taken, the name of the station stored at this position appears behind the display text
RDS NAME. Beneath this, the currently set frequency appears next to the display text FM.
If no station is stored in this position, the word FREE will be displayed here instead of the
frequency.
4. Select the desired memory preset as described and conrm your selection by pressing the
menu button.
5. The display will indicate SAVING.
6. To return to the original display, press the FAVOR button again or wait about 5 seconds until
the device automatically returns to the original display.
12.2.5 Storing a station with the remote control
NOTE
Only the program presets 1-5 can be stored with the remote control. Accessing
the program presets 6-10 is done exclusively through the FAVOR button on the
device.
1. Set the station that you would like to store.
2. Press the program button (button 1-5) at which you would like to store the station until the
display shows the message “stored”.
12.2.6 Accessing stored stations (on the device)
NOTE
Only the program presets 1-5 can be accessed with the remote control. Acces-
sing the program presets 6-10 is done exclusively through the FAVOR button on
the device.
1. Briey press the FAVOR button on the device. The program memory is opened.
2. Press the UP button repeatedly until you have reached the program preset that you would
like to access.
3. Press the menu button. The selected station is played back and the information is shown on
the display.
12.2.7 Accessing a station (with the remote control)
Briey press the program button (button 1-5) of the station. The selected station is played back
and the information is shown on the display.