DVD Home Theatre System Operating Instructions

30
GB
Playing a Disc
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1 Turn on your TV.
2 Switch the input selector on the TV to
this system.
3 Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION to select “DVD.”
“No Disc” appears in the front panel display
and the system is ready for loading the disc.
4 Load a disc.
Push the disc into the disc slot until the disc
is pulled in automatically.
The disc is drawn into the control unit
automatically.
5 Press H.
The system starts playback (continuous
play).
6 Press VOLUME +/– to adjust the
volume.
The volume level appears on the TV screen
and in the front panel display.
Note
• When the system is turned off, do not push a disc into
the control unit.
• Depending on the system status, the volume level
may not appear on the TV screen.
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
– “DEMO” is set to “OFF” (page 25).
– [CONTROL FOR HDMI] is set to [OFF]
(page 58).
Disc
"/1
VOL +/–
FUNCTION
H
Z
Disc slot
"/1
FUNCTION
x
H
X
./>
MUTING
VOLUME
+/–
/
/m/
M/
Z
Labeled side facing
to the front