DVD Home Theatre System Operating Instructions

88
GB
Ti
p
• The function of these buttons are same as the remote
buttons of the SONY TV. For details, refer to the
operating instructions of the TV.
Returning to the Default
Settings
1 Turn off the power.
2 Press and hold "/1 on the control unit
about 5 seconds.
“MEMORY CLR” and “PUSH POWER”
appear alternately in the front panel display
about 10 seconds.
3 Press "/1.
“CLEARING” appears in the front panel
display and the default settings are returned.
After “CLEARED!” appears, the system is
turned off.
Note
• In Step 3, if you do not press [/1 or press any buttons
other than [/1 on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing [/1.
Number buttons,
-
Select the TV channel.
After pressing /, you can select
the text page by entering the three
digit page number.
ANALOG Switch to analogue mode.
DIGITAL Switch to digital mode.
/ Display the information.
/ Access Text.
Colored buttons Select the options on the menu.
Display the Digital Electronic
Programme Guide (EPG).
t/ Switch the TV’s input source
between the TV and other input
sources in TV mode.
After pressing /, you can hold
the current text page.
TOOLS/
OPTIONS
Display the operation menu for the
current display.
MENU/HOME Display the menu of the TV.
RETURN Return to the previous channel or
layer on the menu of the TV.
MUTING Turn off the TV sound
temporarily.
C/X/x/c, Select the item on the menu.
By pressing You can
Returning the system
parameters, such as preset
stations, to the default
settings
DVD HOME THEATRE SYSTEM DAV-F500
A.F.D. STD D.C.S.
FUNCTION
VOL
"/1