4-120-890-11(1) Operating Instructions Blu-ray Disc / DVD Player BDP-S350 4-120-890-11(1) Printed in Malaysia © 2008 Sony Corporation
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION The use of optical instruments with this product will increase eye hazard.
Notes About the Discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction. • Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. • After playing, store the disc in its case. • Clean the disc with a cleaning cloth. Wipe the disc from the center out.
On cleaning discs, disc/ lens cleaners Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction. On replacement of parts In the events that this player is repaired, repaired parts may be collected for reuse or recycling purposes. Copyrights and Trademarks • This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. About this manual • In this manual, “disc” is used as a general reference for the BDs, DVDs, or CDs unless otherwise specified by the text or illustrations.
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hookups and Settings Hooking Up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Information Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Self-Diagnosis Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Video Output Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Audio Output Signals . . . . . . . . . . . . .
A Z OPEN/CLOSE (page 30) Guide to Parts and Controls For more information, see the pages in parentheses. Remote Opens or closes the disc tray. THEATER (page 16) Switches to the optimum video mode for watching movies automatically. When connected with an AV amplifier (receiver) using the HDMI cable, the speaker output also switches automatically. Press the button again to return to the original setting.
D Color buttons (RED/GREEN/ BLUE/YELLOW) Short cut keys for selecting items on some BD’s menus (can also be used for BD’s Java interactive operations). E TOP MENU (page 32) When you press and hold the button, fast forward/fast reverse continues at the selected speed until you release the button. * Search speed does not change when playing CDs. Speed multiple values are approximate. Opens or closes the BD’s or DVD’s Top Menu. – To resume normal playback, press N PLAY.
Front panel A [/1 (on/standby) (page 27) Turns on the player, or sets to standby mode. Lights up when a BD is recognized. You can lock the disc tray to prevent it being opened by mistake. When the player is turned on, hold down X on the player for more than 10 seconds until “LOCKED” appears in the front panel display. The disc tray is locked. z When the player is turned on for the first time, the Blu-ray Disc indicator lights up, then turns off when Easy Setup is complete.
Front panel display A N, X Lights up during playback or pause. B HD (page 42) Lights up when outputting 720p/1080i/ 1080p video signals from the HDMI OUT jack or 720p/1080i video signals from the COMPONENT VIDEO OUT jacks. F Network connection indicator Lights up when downloading the player’s software. For details on downloading the player’s software, see page 40. C HDMI (page 16) Lights up when an HDMI device is connected. D EXT (page 23) Lights up when the external memory is recognized.
Rear panel A COMPONENT VIDEO OUT (Y, PB, PR) jacks (page 17) E Ventilation holes B LINE OUT (S VIDEO) jack (page 18) F EXT slot (page 23) C LINE OUT (R-AUDIO-L) jacks (page 18, 22) D AC IN terminal (page 25) The ventilation fan is inside the player.
Hooking Up the Player Follow steps 1 through 7 to hook up and adjust the settings of the player. Do not connect the AC power cord until you reach “Step 5: Connecting the AC Power Cord” (page 25). Hookups and Settings Check that you have the following items.
Step 1: Connecting to Your TV About video/HDMI OUT jacks The player has the following video jacks. Connect the player to your TV according to the input jack on your TV. When connecting the player to your TV using the HDMI cable, you can enjoy high quality digital pictures and sound through the HDMI OUT jack. Jack type High quality Video resolution Hookup Digital High Definition: See “Connecting to an 1080/24p, 1080p, HDMI jack” (page 15).
Connecting to an HDMI jack Blu-ray Disc/DVD player Hookups and Settings Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and sound through the HDMI OUT jack. If you connect a Sony TV that is compatible with the “Control for HDMI” function (page 16), refer to the operating instructions supplied with the TV. If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
About indicators for HDMI connection When connecting an HDMI compatible component, the HDMI indicator lights up in the front panel display. b • Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In the case of 480i/480p/720p/1080i/ 1080p scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output.
Connecting to component video jacks (Y, PB, PR) Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component video cable or three video cables (not supplied) of the same kind and length. You can enjoy high-quality pictures. Be sure to connect to the LINE OUT (R-AUDIO-L) jacks using the audio/video cable.
Connecting to an audio/video or S VIDEO jack Connect the LINE OUT (VIDEO, R-AUDIO-L) jacks of the player and your TV using the audio/video cable. You can enjoy standard quality pictures and sound. Blu-ray Disc/DVD player or (yellow) (red) (white) Audio/video cable (supplied) S-video cable (not supplied) (yellow) (red) (white) Match the color of the plug to that of the jack.
Step 2: Connecting to Your AV Amplifier (Receiver) About audio/HDMI OUT jacks The player has the following audio jacks. Connect the player to your AV amplifier (receiver) according to the input jack on your AV amplifier (receiver). Hookup Digital See “Connecting to an HDMI jack” (page 20). See “Connecting to digital jacks (OPTICAL/ COAXIAL)” (page 21). Analog Hookups and Settings Jack type See “Connecting to audio L/R jacks” (page 22).
Connecting to an HDMI jack If your AV amplifier (receiver) has an HDMI input, you can enjoy surround sound. If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI” function (page 16), refer to the operating instructions supplied with the AV amplifier (receiver).
Connecting to digital jacks (OPTICAL/COAXIAL) If your AV amplifier (receiver) has a Dolby*1 Digital, Dolby Pro Logic, or DTS*2 decoder and a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS (5.1ch) surround effects. Blu-ray Disc/DVD player Hookups and Settings or Optical digital cable (not supplied) Coaxial digital cable (not supplied) AV amplifier (receiver) : Signal flow 1 Connect the digital jack of the player and your AV amplifier (receiver).
Connecting to audio L/R jacks If your AV amplifier (receiver) only has L and R audio input jacks, use this connection. Blu-ray Disc/DVD player (red) (white) Audio/video cable (supplied) (red) (white) Match the color of the plug to that of the jack.
b Step 3: Inserting the External Memory Insert the external memory in the V direction into the EXT slot as far as it will go. Check that the EXT indicator lights up in the front panel display when turning the player on. Rear of the player Sony USM1GH (not supplied) With the terminal side up Hookups and Settings To enjoy additional content (such as BonusView/BD-Live) on certain Blu-ray Disc titles, you will need to use external memory.
Step 4: Connecting to the Network Connect the LAN (100) terminal of the player to your Internet source using a network cable to update the player’s software. You can also enjoy the BD-Live function (page 33). 1 Blu-ray Disc/DVD player Connect the LAN (100) terminal of the player to your Internet source.
When connecting via a wireless LAN router Blu-ray Disc/DVD player Step 5: Connecting the AC Power Cord Hookups and Settings After all of the other connections are complete, connect the supplied AC power cord to the AC IN terminal of the player. Then plug the player and TV power cords into the AC outlet.
Step 6: Preparing the Remote You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the player (page 10). Controlling TVs with the remote You can control the volume, input source, channel, and power switch of your Sony TV with the supplied remote.
To control other TVs with the remote You can control the volume, input source, channel, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code. If you enter a new code number, the code number previously entered will be erased. 1 While holding down TV [/1, enter the TV’s manufacturer code using the number buttons. For instance, to enter “09,” press “0” then “9.
4 Select a language for the on-screen displays using M/m, and press ENTER. 7 Select a video output resolution for the connected TV, and press ENTER. For details about the video output resolution, see page 43. When you select “HDMI” in step 6 The initial settings message appears. 5 Select “Start,” and press ENTER. 6 Select the cable type used to connect the player and your TV, and press ENTER. Select “HDMI” when connecting your TV using the HDMI cable, and go to step 7.
b 8 Select an aspect ratio that matches your TV, and press ENTER. 10 Select “Allow” to allow Internet connections from BD contents, and press ENTER. Select “Do not allow” to not allow Internet connections from BD contents. 11 Select “Quick Start” to shorten the Hookups and Settings If the picture is distorted or no picture appears, wait for about 30 seconds without pressing any buttons. The display returns to the resolution setting screen.
Playing BDs/DVDs BD DVD Z OPEN/ CLOSE Number buttons
4 5 6 Press HOME. Select “Video” using
Available OPTIONS 32 1 Press OPTIONS. The options menu appears. 2 Select an item using M/m, and press ENTER. The available items differ depending on the disc type or player situation. Items Details A/V Settings Adjusts settings for picture and sound. • Video Settings (page 35) • Audio Settings (page 35) Title List Displays the title list. Play Plays the title from the point where you pressed x STOP. Play from beginning Plays the title from the beginning.
Enjoying BonusView/BD-Live BD Some BD-ROMs have bonus contents and other data that can be downloaded to the external memory (local storage) for enjoyment. Turn the player off. Insert the external memory (not supplied) into the EXT slot on the rear of the player. The external memory is used as the local storage. Make sure that the external memory is properly inserted into the player (page 23). 3 Connect the player to a network (page 24). 4 5 Turn the player on.
To cancel Scene Search mode Press SCENE SEARCH, ENTER, N PLAY, or X PAUSE. Playback starts from the point you pressed the button. b • The Scene Search function is available for titles longer than 100 seconds and shorter than 100 hours. • The Scene Search function may not be available depending on the disc. Searching for a Title/Chapter BD Displaying the playing time and play information BD DVD You can check the title information, including the video transmission rate, etc. Press DISPLAY.
b Adjusting pictures and sound for videos BD DVD To adjust the picture Press OPTIONS during playback. The options menu appears. 2 Select “A/V Settings” using M/m, and press ENTER. 3 4 Select “Video Settings” using M/m, and press ENTER. The “Video Settings” screen appears. To adjust the audio characteristics 1 Press OPTIONS during playback. The options menu appears. 2 Select “A/V Settings” using M/m, and press ENTER. 3 Select “Audio Settings” using M/m, and press ENTER.
b • The “Audio Filter” function does not work for digital audio signals output from the HDMI OUT/ DIGITAL OUT (OPTICAL/COAXIAL) jacks. • There may be little effect by changing the “Audio Filter” setting depending on the disc or playback environment. Playing CDs CD 1 Insert a CD. The Music Player screen appears. 2 Press N PLAY. Playback starts. To select a track 1 2 3 Press HOME. 4 Select a track using M/m. To play the selected track, press N PLAY or ENTER. Select (Music) using
Various music playback operations Operations N PLAY Starts playback from the point where you pressed x STOP. x STOP Stops playback. X PAUSE Pauses playback. . PREV/ NEXT > Skips to the beginning of the current or next track. To go to the previous track press . PREV twice. m/M Fast reverse/fast forwards when pressed during playback. TIME Switches time information on the screen and the front panel display (page 11).
Available OPTIONS during playback Buttons Operations x STOP RETURN Stops a slideshow. X PAUSE Pauses a slideshow. . PREV/ NEXT > Displays the previous or next photo. To view best quality images DISPLAY Displays the file information. 1 Press OPTIONS during playback. The options menu appears. 2 Select an item using M/m, and press ENTER. The available items differ depending on the situation. Items Details Slideshow Speed Changes the slideshow speed.
Using the Settings Displays Select (Setup) on the home menu when you need to change the settings of the player. 1 2 Press HOME. 3 Select the setup category icon to change using M/m, and press ENTER. Select (Setup) using
Setting list Network Update You can setup the following options. Icon Explanation Network Update (page 40) Updates the software of the player. Video Settings (page 41) Makes the video settings according to the type of connecting jacks. Audio Settings (page 44) Makes the audio settings according to the type of connecting jacks. BD/DVD Viewing Settings (page 47) Makes detailed settings for BD/ DVD playback. You can update and improve the functions of the player.
To update the software using an update disc You can update and improve the functions of the player using an update disc provided by Sony dealer or local authorized Sony service facility. Insert the update disc. The display asks for confirmation. 2 Select “OK,” and press ENTER. Software update starts. When updating finishes, “FINISH” appears for 5 seconds in the front panel display, then the disc tray automatically opens. 3 Remove the disc. The player automatically turns off.
DVD Aspect Ratio Selects the display configuration for playback of 16:9 screen pictures on a 4:3 screen TV (selectable when “TV Type” is set to “4:3” and “Screen Format” is set to “Fixed Aspect Ratio”). Letter Box Pan & Scan Displays a wide picture with black bands on the top and bottom. Output Video Format Selects the jack type to output video signals (“TV Connection Method”) and output resolution (“HDMI Resolution”/“Component Resolution”).
b BD-ROM 1080/24p Output Sets to output 1920 × 1080p/24 Hz video signals when playing film-based materials on BD-ROMs (720p/24 Hz or 1080p/24 Hz). 1920 × 1080p/24 Hz video signals can be output when all of the following conditions are met. – You connect a 1080/24p-compatible TV using the HDMI OUT jack, – “Output Video Format” is set to “HDMI,” and – “HDMI Resolution” is set to “Auto” or “1080p.” The 24P indicator lights up when outputting 1920 × 1080p/24 Hz video signals.
YCbCr/RGB (HDMI) Sets the color setting for video signals output from the HDMI OUT jack. Select the setting that matches the connected TV type. Auto Automatically detects the type of external device, and switches to the matching color setting. YCbCr (4:2:2) Outputs YCbCr 4:2:2 video signals. The default settings are underlined. Audio Output Priority Selects the jack type to output audio signals. 2-channel linear PCM signals are output at 48 kHz maximum from output jacks other than the priority jacks.
BD Audio Setting Selects whether to mix or not mix interactive audio and secondary audio (commentary) when playing a BD that contains such audio. Mix Direct Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. DTS Selects the audio signals output when playing DTS discs. This setting affects the output from the DIGITAL OUT (COAXIAL/ OPTICAL) jack. Converts to output Linear PCM signals.
Audio DRC Downmix Selects the dynamic range (compression level of the sound) setting when playing a BD or DVD that conforms to “Audio DRC.” Auto Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the “Standard” level. Standard Performs playback at a compression level between “TV Mode” and “Wide Range.” TV Mode Sounds are compressed heavily. Low sounds are easier to hear. Wide Range No compression works. A more dynamic sound is produced.
BD/DVD Viewing Settings 4 The lower the value, the stricter the limitation. If you select “Select Age Restriction,” you can enter the age from “0” to “255” using
z You can change the password (see “Password” on page 48). b • If you forget the password, reset the player (page 52) and set a new password (see “Password” on page 48). • When you play discs which do not have the Parental Control function, playback cannot be limited on this player. • Depending on the disc, you may be asked to change the Parental Control level while playing the disc. In this case, enter your password, then change the level.
Photo Settings The default setting is underlined. Slideshow Speed Changes the slideshow speed. Photos change rapidly. Normal Photos change at normal speed. Slow Photos change slowly. The default settings are underlined. OSD Selects your language for the player onscreen displays. Dimmer Adjusts the lighting of the front panel display. Bright Bright lighting. Dark Low lighting. Off Turns off the lighting during playback. Low lighting other than during playback.
Auto Display On Off Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc. Displays information only when you press DISPLAY. Screen Saver The screen saver image appears when you do not use the player for more than 15 minutes while an on-screen display, such as the home menu, is displayed on your TV screen. The screen saver image helps prevent your display device from becoming damaged (ghosting). On Turns on the screen saver function.
b When you set the “DNS Server (Primary)”/ “DNS Server (Secondary)” addresses manually, enter the “DNS Server (Primary)” address. Otherwise, the “Internet Settings” will be set incorrectly. 4 If your ISP has a specific proxy server setting, select “Proxy Settings” using M/m, and press ENTER. The “Proxy Settings” display appears. If the proxy server does not have a specific setting, go to step 8. Set “Use of Proxy Server” to “On.” Select “Proxy Server” and “Port,” and enter the settings.
Easy Setup Re-runs the Easy Setup to make the basic settings. Resetting You can reset the player settings to the factory default by selecting the group of settings. All the settings within the group will be reset. 1 Select “Easy Setup,” and press ENTER. 2 Select “Start” using
Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power does not turn on. The message “A new software version has been found on the network. Perform update under "Network Update."” appears on the screen when turning the player on.
Picture See also “Connecting to an HDMI jack” (page 15) when connecting equipment using the HDMI cable. There is no picture/picture noise appears. , Check that all the connecting cables are securely connected. , Check whether the connecting cables are damaged. , Check the connection to your TV (page 14) and switch the input selector on your TV so that the signal from the player appears on the TV screen.
The interactive audio is not output. , Set “BD Audio Setting” to “Mix” in the “Audio Settings” setup (page 45). HDMI There is no picture or no sound when connected to the HDMI OUT jack. , Try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then reconnect the HDMI cable. , The HDMI OUT jack is connected to a DVI device that does not support copyright protection technology.
Bonus contents or other data that are contained in a BD-ROM cannot be played. The language for the soundtrack/subtitle or angles cannot be changed. , Try the following: 1Remove the disc. 2Turn the player off. 3Remove and reinsert the external memory (page 23). 4Turn the player on. 5Check that the EXT indicator lights up in the front panel display. 6Insert the BD-ROM with BonusView/BD-Live. , Try using the BD’s or DVD’s menu instead of the direct selection button on the remote (page 32).
Self-Diagnosis Function When the self-diagnosis function is activated to prevent the player from malfunctioning, an error code appears in the front panel display, or just appears without any messages on the entire screen. In these cases, check the following. When an error code appears in the front panel display Corrective action Exxxx SYS ERR Contact your nearest Sony dealer or local authorized Sony service facility and give the error code.
Playable Discs Type Disc Logo Icon used in this manual BD-ROMs and BD-REs/BD-Rs in BDMV and BDAV mode, including 8 cm discs (single layer) and DL discs Blu-ray Disc BD DVD VIDEO DVD Discs such as movies that can be purchased or rented DVD DVD+RWs/DVD+Rs in +VR mode or DVD-RWs/DVD-Rs in video and VR mode, including 8 cm discs (single layer) and DVD+R DL/DVD-R DL discs DATA DVD DVD+RWs/DVD+Rs/DVD-RWs/ DVD-Rs containing JPEG* image files CD Music CDs or CD-Rs/CD-RWs in music CD format DVD DATA
b • • • • • • • • • • Notes about BD-REs/BD-Rs, DVD+RWs/ DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/ CD-RWs Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device.
About playback of discs recorded in AVCHD format This player can play AVCHD format discs. TM What is the AVCHD format? The AVCHD format is a high-definition digital video camera format used to record SD (standard definition) or HD (high definition) signals of either the 1080i specification*1 or the 720p specification*2 on DVDs, using efficient data compression coding technology. The MPEG-4 AVC/H.
Video Output Resolution Output resolution differs depending on the “Output Video Format” setting in the “Video Settings” setup (page 41).
Audio Output Signals The audio output differs as follows, depending on the source, output jack, and the selected settings. Jacks/ settings*1 Analog DIGITAL OUT (OPTICAL/ COAXIAL) jacks*2 jack*2 Disc/source Auto*3 2ch PCM*3 Bitstream*4 PCM LINE OUT (R-AUDIO-L) jacks BD LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch LPCM 5.1ch LPCM 5.1ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch LPCM 7.1ch LPCM 7.
Specifications System Laser: Semiconductor laser Inputs and outputs Additional Information (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/–18 dBm (wave length 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/ PB, PR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.
Language Code List For details, see page 47. The language spellings conform to the ISO 639: 1988 (E/F) standard. Number, Language (BD Language Code/DVD Language Code) not specified Parental Control/Area Code For details, see page 47.
Terms and Conditions of Use and End User License Agreement The Sony Blu-ray Disc player (“Product”) and associated software (“Software”) are provided and maintained by Sony Electronics Inc. and its affiliates (“Sony”). Sony also provides and maintains associated service (the “Service”), including any subsite accessible through the Service’s Internet homepage (the “Site”).
GNU General Public, Lesser General Public, & Other Licenses. Notwithstanding terms in this Agreement, certain portions of the Software are governed by the GNU Lesser General Public License, Version 2.1 (LGPL), GNU General Public License Version 2 (GPL), and other open source code licenses (“Open Source Licenses”), copies of which are attached hereto and incorporated herein.
11. General Provisions This Agreement, the limited warranty accompanying the Product, plus any additional terms posted on the Service or Site, together constitute the entire agreement between Sony and you with respect to your use of the Product, Service, Site, Content, and Software. Any notice by Sony hereunder may be made by letter, email, or posting on the Service or Site.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations. Finally, any free program is threatened constantly by software patents.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Original SSLeay Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.
This product includes software developed by Jonathan Stone for the NetBSD Project. This product includes software developed by Manuel Bouyer. This product includes software developed by Rolf Grossmann. This product includes software developed by TooLs GmbH. This product includes software developed by the NetBSD Foundation, Inc. and its contributors. This product includes software developed by the University of California, Berkeley and its contributors.
BD-RE (page 58) Glossary AACS “Advanced Access Content System” is a specification for managing digital entertainment contents stored on the next generation of prerecorded and recorded optical media. The specification enables consumers to enjoy digital entertainment content, including high-definition content.
DTS-HD Master Audio (page 62) 24p True Cinema (page 43) DTS-HD Master Audio has a maximum transmission rate of 24.5 Mbps, and uses lossless compression (Lossless), and DTSHD Master Audio corresponds to a maximum sampling frequency of 192 kHz, and maximum of 7.1ch. Movies shot with a film camera consist of 24 frames per second. Since conventional televisions (both CRT and flat panels) display frames either at 1/60 or 1/50 second intervals, the 24 frames do not appear at an even pace.
Index Words in quotations appear in the on-screen displays.
