User's Manual

Debugging Station (for PlayStation
®
3)
Instruction Manual /
ợ䒌娎㕲㙜
DECH-3000A / DECH-S3000A
4-299-854-11(1)
EN
WARNINGS
• To avoid electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
• CAUTION
– Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
– The use of optical instruments with this product will increase eye hazard.
• This appliance is classifi ed as a CLASS 1 LASER product under IEC60825-1:2007.
CLASS 1LASER PRODUCT
LASER KLASE1
LUOKAN 1LASER LAITE
KLASS 1LASERAPPARAT
Photosensitivity/Epilepsy/Seizures
A very small percentage of individuals may experience epileptic seizures or blackouts
when exposed to certain light patterns or fl ashing lights. Exposure to certain patterns or
backgrounds on a television screen or when playing video games may trigger epileptic
seizures or blackouts in these individuals. These conditions may trigger previously
undetected epileptic symptoms or seizures in persons who have no history of prior
seizures or epilepsy. If you, or anyone in your family, has an epileptic condition or has
had seizures of any kind, consult your physician before playing.
IMMEDIATELY DISCONTINUE use and consult your physician before resuming
gameplay if you or your child experience any of the following health problems or
symptoms:
• dizziness,
• altered vision,
• eye or muscle twitches,
• loss of awareness,
• disorientation,
• seizures, or
• any involuntary movement or convulsion.
RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR PHYSICIAN.
Use and handling of video games to reduce the likelihood of a seizure
• Use in a well-lit area and keep as far away as possible from the television screen.
• Avoid large screen televisions. Use the smallest television screen available.
• Avoid prolonged use of the system. Take a 15-minute break during each hour of play.
• Avoid playing when you are tired or need sleep.
Radio waves
Radio waves may affect electronic equipment or medical devices (for example,
pacemakers), which may cause malfunctions and possible injuries.
• If you use a pacemaker or other medical device, consult your physician or the
manufacturer of your medical device before using the wireless networking feature.
• Do not use the wireless networking feature in the following locations:
– Areas where wireless network use is prohibited, such as in hospitals. Abide by
medical institution regulations when using the system on their premises.
– Areas near fire alarms, automatic doors and other types of automated equipment.
3D images
Some people may experience discomfort (such as eye strain, eye fatigue, or nausea)
while watching 3D video images or playing stereoscopic 3D games on 3D televisions. If
you experience such discomfort you should immediately discontinue use of your
television until the discomfort subsides.
SCE recommends that all viewers take regular breaks while watching 3D video, or
playing stereoscopic 3D games. The length and frequency of necessary breaks may
vary from person to person – please take breaks that are long enough to allow any
feelings of discomfort to subside. If symptoms persist, consult your physician.
When using any 3D enabled device with your PlayStation
®
3 system you should read the
instruction manual for that device.
For customers in the U.S.A. and Canada
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment should be installed and operated with at least 20 cm (8
in) and more between the radiator and person’s body (excluding extremities: hands,
wrists, feet and ankles).
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifi cations not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
If you have questions about this product, visit http://www.scedev.net, email Developer
Support at [e-mail] or write to:
Sony Computer Entertainment America LLC
Developer Support
919 East Hillsdale Boulevard
Foster City, CA 94404-2175 USA
Declaration of Conformity
Trade Name : SONY
Model No. : DECH-3000A, DECH-S3000A
Responsible Party : Sony Electronics Inc.
Address : 16530 Via Esprillo
San Diego, CA 92127 U.S.A.
Telephone No. : 858-942-2230
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Pour les utilisateurs aux États-Unis et au Canada
Cet équipement est conforme aux limites d'exposition aux radiofréquences IC établies
pour un environnement non contrôlé et se conforme aux exigences de conformité pour
l'exposition aux RF IC, dans le supplément C à OET65 et CNR- 102. Cet équipement
doit être installé et opéré à au moins 20 cm (8 po.) d'écart entre le radiateur et la
personne physique (extrémités du corps non prises en compte : mains, poignets, pieds
et chevilles).
Ce transmetteur ne doit pas être utilisé conjointement ou placé avec tout autre
transmetteur ou antenne.
Remarque
Cette unité a été testée et il a été déterminé qu’elle se conforme aux normes stipulées
par l’article 15 des règlements de la FCC pour un appareil numérique de catégorie B.
Ces normes sont établies afi n d’offrir une protection raisonnable contre toute possibilité
de brouillage préjudiciable dans une installation résidentielle. Cette unité produit, utilise
et peut émettre une énergie radioélectrique, et si elle n’est pas installée et utilisée
conformément aux instructions, pourrait causer un brouillage préjudiciable à la
radiocommunication. Il est toutefois impossible de garantir qu’il n’y aura pas de
brouillage préjudiciable dans une installation donnée. Si cette unité cause un brouillage
préjudiciable à la réception radio ou télévisuelle, ce qui peut être déterminé en activant
ou désactivant l’appareil, l’utilisateur est encouragé à tenter de corriger le brouillage en
prenant l’une ou plusieurs des mesures proposées suivantes :
– Réorienter ou déplacer l’antenne de réception.
– Éloigner l’unité du récepteur.
– Connecter l’appareil à une prise sur un autre circuit que celui auquel le récepteur
est connecté.
– Demander de l’aide au détaillant ou à un technicien radio/télévision spécialisé.
Aucun changement ou modifi cation n’est permis sans avoir été approuvé par les parties
responsables des règlementations qui est en droit de refuser l’autorisation de l’utilisateur
à utiliser ce produit.
Pour toute question concernant ce produit, visitez http://www.scedev.net, envoyez un
courriel au service d’Assistance aux développeurs à l’adresse
[e-mail] ou envoyez un courrier à :
Sony Computer Entertainment America LLC
Developer Support
919 East Hillsdale Boulevard
Foster City, CA 94404-2175 USA
Déclaration de Conformité
Nom commercial : SONY
N° de modèle : DECH-3000A, DECH-S3000A
Partie responsable : Sony Electronics Inc.
Adresse : 16530 Via Esprillo
San Diego, CA 92127 U.S.A.
N° de téléphone : 858-942-2230
Cet appareil est conforme aux stipulations de l’article 15 des règlements de la FCC
et CNR-Gen des règles IC. Son opération est sous réserve des deux conditions
suivantes : (1) cet appareil ne peut pas causer de brouillage préjudiciable et (2) cet
appareil doit accepter le brouillage préjudiciable reçu, y compris un brouillage qui
pourrait causer son fonctionnement irrégulier.
For customers in the U.S.A.
The lithium coin memory back-up battery inside this product contains Perchlorate.
The following statement is required by the State of California, USA:
Perchlorate Material – special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
For customers in Europe
This equipment has been tested and found to comply with the limits set out in the
R&TTE Directive using a connection cable shorter than 3 metres. Do not use cables
longer than 3 metres.
Where you see this symbol on any of our electrical products/packaging in Europe, it
means that at end of life the product/battery must be disposed of in accordance with
any applicable laws or requirements for the separate disposal of electrical equipment/
batteries. This symbol may be used on batteries in combination with additional chemical
symbols. The chemical symbols for mercury (Hg) or lead (Pb) will appear if the battery
contains more than 0.0005% mercury or more than 0.004% lead. Accordingly at end of
life we will arrange for separate disposal of our loan equipment including without
limitation development kits which remain at all times the property of Sony Computer
Entertainment Europe. If you would like assistance with the disposal of any other
electrical products which we have supplied to you for business use, we can arrange a
take-back service on request. Please check https://www.tpr.scee.net for more
information.
This product contains a battery which is permanently built-in for safety, performance or
data integrity reasons. The battery should not need to be replaced during the lifetime of
the product and should only be removed by skilled service personnel. To ensure the
correct waste treatment of the battery, please dispose of this product as electrical
waste.
The manufacturer of this product is Sony Computer Entertainment Inc., 1-7-1 Konan,
Minato-ku, Tokyo, 108-0075, Japan.
The Authorised Representative for EMC and product safety is Sony Deutschland
GmbH, Hedelfi nger Strasse 61, 70327 Stuttgart, Germany.
Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great
Marlborough Street, London, W1F 7LP, United Kingdom.
For customers in the United Kingdom
A molded plug complying with BS1363 is fi tted to this equipment for your safety and
convenience. Should the fuse in the plug supplied need to be replaced, a 5AMP fuse
approved by ASTA or BSI to BS1362, (i.e., marked with
or ) must be used. If the
plug supplied with this equipment has a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never use the plug without the fuse cover. If you
should lose the fuse cover, please contact your nearest Sony service station.
Precautions
Safety
This product has been designed with the highest concern for safety. However, any
electrical device, if used improperly, has the potential for causing fi re, electrical shock or
personal injury. To help ensure accident-free operation, follow these guidelines:
• Observe all warnings, precautions and instructions.
• Regularly inspect the AC power cord for damage.
• Stop use, unplug the AC power cord from the electrical outlet and disconnect any
other cables immediately if the device functions in an abnormal manner, produces
unusual sounds or smells or becomes too hot to touch.
Use and handling
• Do not connect cables other than a USB cable while the AC power cord is plugged
into the electrical outlet.
• Do not touch the system or connected cables or accessories during an electrical
storm.
• Do not use the system or accessories near water.
• Do not allow liquid, small particles or other foreign objects to get into the system or
accessories.
• Do not touch the connectors of the system or accessories.
• Do not expose the system or accessories to dust, smoke or steam. Also, do not place
the system in an area subject to excessive dust or cigarette smoke. Dust build-up or
cigarette smoke residue on the internal components (such as the lens) may cause
the system to malfunction.
• Do not expose the system or accessories to high temperatures, high humidity or
direct sunlight.
• Do not place the system or accessories on surfaces that are unstable, tilted or
subject to vibration.
• Do not set the system other than in the vertical or horizontal position. When setting
the system in the vertical position, use the vertical stand (sold separately) for this
model of the system. Also, do not change the position while the system is turned on.
• Be careful when carrying the system. If you do not have a good grip, the system may
drop causing potential damage or injury.
• Do not move or change the position of the system with a disc inserted. The vibration
may result in scratching of the disc or the system.
• Do not stand on or put objects on the system, and do not stack the system with other
devices.
• Do not place the system and connected accessories on the fl oor or in a place where
they may cause someone to trip or stumble.
• Do not allow bodily contact with the system or air from the system vents for an
extended period of time while in use. Extended contact under these conditions may
cause low-temperature burns.
• When connecting the system to a plasma or projection* TV, do not leave a still image
on the TV screen for an extended period of time, as this may leave a faint image
permanently on the screen.
* Except LCD screen types
• When using the motion sensor function of the wireless controller, be cautious of the
following points. If the controller hits a person or object, this may cause accidental
injury or damage.
– Before using, check that there is plenty of space around you.
– When using the controller, grip it firmly to make sure it cannot slip out of
your hand.
– If using a controller that is connected to the debugging station with a
USB cable, make sure there is enough space for the cable so that the
cable will not hit a person or object. Also, take care to avoid pulling the
cable out of the debugging station while using the controller.
Vents
Do not block any vents. To maintain good ventilation, follow the guidelines below:
• Place the system at least 10 cm (4 in) away from a wall surface.
• Do not place on a carpet or rug with long fi bers.
• Do not place in a narrow or cramped space.
• Do not cover with cloth.
• Do not allow dust to build up on the vents.
AC power cord use
• Do not use a power cord other than the supplied AC power cord. Do not modify the
cord.
• Do not touch the plug of the AC power cord with wet hands.
• Protect the AC power cord from being walked on or pinched particularly at plugs,
expansion receptacles and the point where the cord exits from the system.
• Do not place heavy items on the cord.
• Do not place the AC power cord near heating equipment and do not expose the cord
to heat.
• Do not allow dust or foreign matter to build up around the AC IN connector. Before
connecting or plugging in the AC power cord, check that there is no dust or foreign
matter in or on the power plug or connecting end of the cord, the electrical outlet or
the AC IN connector on the system rear. If the plug or connector becomes dirty, wipe
off with a dry cloth before connecting.
• Unplug the AC power cord from the electrical outlet before cleaning or moving the
system, or when you do not intend to use the system for an extended period of time.
• When disconnecting, grasp the power cord by the plug and pull straight out of the
electrical outlet. Never pull by the cord and do not pull out at an angle.
• Do not connect the AC power cord to a voltage transformer or inverter. Connecting
the AC power cord to a voltage transformer for overseas travel or an inverter for use
in an automobile may cause heat to build up in the system and may cause burns or a
malfunction.
Never disassemble or modify the system or
accessories
Use the debugging station and accessories according to the instructions in the product
documentation. No authorization for the analysis or modifi cation of the system, or the
analysis and use of its circuit confi gurations, is provided. Unauthorized modifi cation of
the system will void your warranty. There are no user serviceable components inside
the debugging station. Additionally, there is a risk of exposure to laser radiation as well
as to electrical shock.
Network - wired connection
Use only an Ethernet cable compatible with 10BASE-T, 100BASE-TX or 1000BASE-T
networks. Do not use a cord for a standard residential telephone line or cables of types
other than those mentioned here. Using the wrong type of cord or cable can cause
more electrical current than necessary to fl ow through the LAN connector, which may
lead to heat build-up, fi re or malfunction.
Moisture condensation
If the system or disc is brought directly from a cold location to a warm one, moisture
may condense on the lens inside the system or on the disc. Should this occur, the
system may not operate properly. In this case, remove the disc and turn off and unplug
the system. Do not put the disc back in until the moisture evaporates (this may take
several hours).
Hard disk
This system is equipped with a hard disk (a recording device for storing software, data,
etc.). Follow the instructions below to help prevent software or data loss or corruption or
damage to the hard disk.
• Do not place the system on an unstable surface or a surface that is subject to
vibration.
• Do not move the system while it is turned on.
• Do not subject the system to physical shock.
DECH-4000AA / DECH-S4000AA
DECH-4000AB / DECH-S4000AB
0-000-000-01(1)
DECH-4000AA, DECH-S4000AA, DECH-4000AB, DECH-S4000AB
DECH-4000AA, DECH-S4000AA, DECH-4000AB, DECH-S4000AB
(DECH-4000AA, DECH-4000AB only)
(DECH-4000AB and DECH-S4000AB only)