4-168-227-11(1) FM/AM Digital Radio CD Player Operating Instructions US Manual de instrucciones ES Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CDX-GT700HD Serial No. To cancel the demonstration (DEMO) display, see page 6. Para cancelar la pantalla de demostración (DEMO), consulte la página 6.
Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/ connections manual. Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content (“WM-DRM Software”).
Table of Contents Getting Started iPod Playable discs on this unit . . . . . . . . . . . . . . . . . 6 Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . 6 Canceling the DEMO mode . . . . . . . . . . . . . . . 6 Preparing the card remote commander . . . . . . . 6 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 6 Detaching the front panel . . . . . . . . . . . . . . . . . 7 Attaching the front panel . . . . . . . . . . . . . . . 7 Playing back iPod . . . . . . . . . . . .
Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.xplodsony.
Getting Started Playable discs on this unit This unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA/AAC files (page 21)). Type of discs Preparing the card remote commander Remove the insulation film. Label on the disc CD-DA Tip For how to replace the battery, see page 22. MP3 WMA AAC Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.
Detaching the front panel You can detach the front panel of this unit to prevent theft. Caution alarm Attaching the front panel Place the hole A of the front panel onto the spindle B on the unit, then lightly push the left side in. Press (SOURCE) on the unit (or insert a disc) to operate the unit. If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.
Location of controls and basic operations Main unit 1 2 34 5 OFF 6 8 9 7 OPEN ZAP SEEK SOURCE MODE AUX CAT TAG SEEK q; qa qs 1 2 qd Front panel removed qj ALBUM qk ql REP SHUF DM PAUSE SCRL 3 4 5 6 DSPL qf qg qh This section contains instructions on the location of controls and basic operations. For details, see the respective pages. A OFF button To turn off; stop the source. B RESET (BACK) button page 11 To return to the previous display.
J SEEK +/– buttons CD/USB: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold). Radio: To tune in stations automatically (press); find a station manually (press and hold). K MODE button* page 13, 17, 18 Press to select the radio band (FM/AM)/ select the play mode of iPod. Press and hold to enter/cancel the passenger control. 1 L (BROWSE) button page 11 To enter the Quick-BrowZer mode.
Card remote commander RM-X151 1 2 3 OFF SOURCE ATT SEL MODE Remove the insulation film before use (page 6). A OFF button To turn off; stop the source. 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 + VOL – B SOURCE button*1 To turn on; change the source (Radio/CD/ USB/AUX). C < (.)/, (>) buttons To control Radio/CD/USB, the same as (SEEK) –/+ on the unit. Setup, sound setting, etc., can be operated by < ,. q; D DSPL (display) button To change display items.
Searching for a track Searching a track by name — Quick-BrowZer You can search for a track in a CD or USB device easily by category. (BROWSE) Searching by skip items — Jump mode When many items are in a category, you can search the desired item quickly. 1 Press (SEEK) + in Quick-BrowZer mode. The following display appears. Control dial/ select button A Current item number B Total item number in the current layer SEEK +/– (BACK) 1 Press (BROWSE).
Searching a track by listening to track passages — ZAPPIN™ While playing back short track passages in a CD or USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. ZAP Select button Radio What is HD Radio™ Technology? HD Radio Broadcasting was approved by the Federal Communications Commission in October 2002 as the system for digital AM and FM broadcasting in the U.S.
When a station name is displayed Note If you try to store another station on the same number button, the previously stored station will be replaced.
iTunes Tagging The iTunes Tag button on this unit allows you to tag songs you like that are broadcast by HD Radio stations. Information about these tagged songs is stored by the receiver and transferred to your iPod. When you connect your iPod to your computer, iTunes automatically presents songs in a new Tagged playlist so you can preview, buy, and download them.
CD USB devices For details on the compatibility of your USB device, visit the support site. Playing a disc 1 2 3 Press (OPEN). Insert the disc (label side up). Support site Close the front panel. Playback starts automatically. http://esupport.sony.com http://www.xplodsony.com/ Ejecting the disc • MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant with the USB standard can be used. • Corresponding codec is MP3 (.mp3), WMA (.wma) and AAC (.m4a).
Removing the USB device 1 Stop the USB device playback. 2 Remove the USB device. If you remove your USB device during playback, data in the USB device may be damaged. Notes • Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. • Do not open the front panel during playback of the USB device, otherwise USB data may be damaged. • This unit cannot recognize USB devices via a USB hub.
Tip We recommend the RC-100IP USB cable (not supplied) to connect the dock connector. iPod For details on the compatibility of your iPod, see “About iPod” on page 21 or visit the support site. The tracks on the iPod start playing automatically from the point last played. If an iPod is already connected, to start playback press (SOURCE) repeatedly until “USB” appears. (“IPD” appears in the display when iPod is recognized.
Display items Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. Select A Source (iPod) indication B Track name, Artist name, Album name, Track number/Elapsed playing time, Clock To change display items B, press (DSPL). Tip When album/podcast/genre/artist/playlist is changed, its item number appears momentarily. Note Some letters stored in iPod may not be displayed correctly. Setting the play mode 1 During playback, press (MODE).
Other functions Changing the sound settings Adjusting the sound characteristics 1 Press the select button repeatedly until the desired item appears. 2 Rotate the control dial to adjust the selected item. 3 Press (BACK). The setting is complete and the display returns to normal reception/play mode. Customizing the equalizer curve — EQ3 “CUSTOM” of EQ3 allows you to make your own equalizer settings. 1 Select a source, then press the select button repeatedly to select “EQ3.
AUX-A* (AUX Audio) Activates the AUX source display: “ON,” “OFF” (page 20). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: “NO,” “30S (Seconds),” “30M (Minutes),” “60M (Minutes).” DEMO (Demonstration) Activates the demonstration: “ON,” “OFF.” DIMMER Changes the display brightness. – “AT”: to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) – “ON”: to dim the display. – “OFF”: deactivate the dimmer.
Additional Information Precautions • Cool off the unit beforehand if your car has been parked in direct sunlight. • Power antenna (aerial) extends automatically. Moisture condensation – CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet/Romeo or multi-session.
Cleaning the connectors Maintenance Replacing the lithium battery of the card remote commander Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
Removing the unit 1 Specifications Remove the protection collar. AUDIO POWER SPECIFICATIONS 1 Detach the front panel (page 7). CEA2006 Standard Power Output: 17 Watts RMS 4 at 4 Ohms < 1% THD+N SN Ratio: 82 dBA (reference: 1 Watt into 4 Ohms) 2 Pinch both edges of the protection collar, then pull it out. Tuner section FM Tuning range: 87.5 – 107.9 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 10.
Inputs: BUS control input terminal BUS audio input terminal Remote controller input terminal Antenna (aerial) input terminal Telephone ATT control terminal Illumination control terminal AUX input jack (stereo mini jack) USB signal input connector Tone controls: Low: ±10 dB at 60 Hz (XPLOD) Mid: ±10 dB at 1 kHz (XPLOD) High: ±10 dB at 10 kHz (XPLOD) Power requirements: 12 V DC car battery (negative ground (earth)) Dimensions: Approx.
The display items do not scroll. • Display items with many characters may not scroll. • “A.SCRL” is set to “OFF.” t Set “A.SCRL-ON” (page 20). t Press and hold (DSPL) (SCRL). The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. t Turn off the unit. DSO does not function. Depending on the type of car interior or type of music, DSO may not have a desirable effect. Radio reception The stations cannot be received.
Error displays/Messages 26 CHECKING The unit is confirming the connection of a USB device. t Wait until confirming the connection is finished. ERROR • The disc is dirty or inserted upside down. t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play due to a problem. t Insert another disc. • USB device was not automatically recognized. t Reconnect it again. • Press Z to remove the disc. FAILURE (Illuminates until any button is pressed.
Asegúrese de instalar esta unidad en el tablero del automóvil por razones de seguridad. Para realizar la instalación y las conexiones, consulte el manual de instalación y de conexiones suministrado. Advertencia ZAPPIN es una marca comercial de Sony Corporation. Windows Media y el logotipo de Windows son marcas comerciales o marcas comerciales registradas de Microsoft Corporation en Estados Unidos o en otros países. iPod es una marca comercial de Apple Inc., registrada en los EE. UU. y otros países.
Los proveedores de contenidos utilizan la tecnología de gestión de derechos digitales para Windows Media contenida en este dispositivo (“WM-DRM”) para proteger la integridad de su contenido (“Contenido seguro”) para que no se realice un uso inapropiado de su propiedad intelectual, incluyendo el copyright. Este dispositivo utiliza software WM-DRM para reproducir Contenido seguro (“Software WMDRM”).
Tabla de contenido Procedimientos iniciales iPod Discos que se pueden reproducir en esta unidad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Restauración de la unidad . . . . . . . . . . . . . . . . . 6 Cancelación del modo DEMO. . . . . . . . . . . . . . 6 Preparación del control remoto de tarjeta . . . . . 6 Ajuste del reloj . . . . . . . . . . . . . . . . . . . . . . . . . 6 Extracción del panel frontal. . . . . . . . . . . . . . . . 7 Colocación del panel frontal . . . . . . . . .
Sitio Web de soporte técnico en línea Para resolver cualquier duda u obtener la información más reciente sobre el soporte técnico de este producto, visite el siguiente sitio Web: http://esupport.sony.com http://www.xplodsony.
Procedimientos iniciales Discos que se pueden reproducir en esta unidad Preparación del control remoto de tarjeta Retire la lámina de aislamiento. Esta unidad permite reproducir discos CD-DA (incluidos CD TEXT) y CD-R/CD-RW (archivos MP3/WMA/AAC (página 23)). Tipos de discos Etiqueta del disco CD-DA Sugerencia Si desea obtener información adicional sobre cómo sustituir la pila, consulte la página 24.
Extracción del panel frontal Es posible extraer el panel frontal de la unidad para evitar que la roben. Alarma de precaución Colocación del panel frontal Coloque el orificio A del panel frontal en el eje B de la unidad y, a continuación, presione ligeramente el lado izquierdo hacia adentro. Presione (SOURCE) en la unidad (o inserte un disco) para utilizarla.
Ubicación de los controles y operaciones básicas Unidad principal 1 2 34 5 OFF 6 8 9 7 OPEN ZAP SEEK SOURCE MODE AUX CAT TAG SEEK q; qa qs qd Panel frontal extraído qj qk ql ALBUM 1 2 REP SHUF DM PAUSE SCRL 3 4 5 6 DSPL qf qg qh Este apartado contiene instrucciones acerca de la ubicación de los controles y las operaciones básicas. Consulte las páginas indicadas para obtener información detallada. A Botón OFF Para apagar la unidad; detener la fuente.
J Botones SEEK +/– CD/USB: Para omitir pistas (presionar); para omitir pistas en forma continua (presionar y volver a presionar al cabo de 1 segundo y mantener presionado); para retroceder o avanzar una pista rápidamente (mantener presionado). Radio: Para sintonizar emisoras en forma automática (presionar); para localizar una emisora en forma manual (mantener presionado).
Control remoto de tarjeta RM-X151 1 2 3 OFF SOURCE ATT SEL MODE 6 7 8 + 9 – 4 5 SCRL DSPL 1 2 3 4 5 6 I Botones M (+)/m (–) Para controlar el CD/USB, de la misma manera que con (1)/(2) (ALBUM –/+) en la unidad. Es posible ajustar la configuración, los ajustes de sonido, etc. mediante M m. q; J Botón SCRL (desplazamiento) Para desplazar el elemento de la pantalla. qa K Botones numéricos Para recibir las emisoras almacenadas (presionar); para almacenar emisoras (mantener presionado).
Búsqueda de una pista Búsqueda de una pista por nombre — Quick-BrowZer Puede buscar una pista fácilmente en un CD o dispositivo USB por categoría. (BROWSE) Búsqueda por omisión de elementos — modo de Omisión Cuando varios elementos se encuentran dentro de una misma categoría, es posible encontrar el elemento deseado rápidamente. 1 Presione (SEEK) + en el modo QuickBrowZer. Aparecerá la siguiente pantalla.
Radio Búsqueda de una pista por segmentos — ZAPPIN™ Es posible buscar una pista que desee escuchar mediante la reproducción de pequeños fragmentos de pistas de un CD o dispositivo USB de forma secuencial. El modo ZAPPIN es adecuado para buscar pistas en el modo de reproducción aleatoria o de repetición aleatoria. ZAP Botón de selección (BACK) 1 Durante la reproducción, presione (ZAP). Cuando “ZAPPIN” aparece en la pantalla, la reproducción se inicia en un segmento de la pista siguiente.
Cuando aparece el nombre de una emisora Almacenamiento manual 1 C Nombre de la emisora D FM/AM: recepción de una emisión FM/AM analógica (si antes se recibió una emisión digital)*1 HD: recepción de una emisión FM/AM digital sin programa adicional*2 HD1: recepción del programa principal de una emisión FM digital con programa adicional HD2-8: recepción de un programa adicional de una emisión FM digital *1 Si no se recibe una emisión digital, aparece “NO NAME”.
Presione (SEEK) – para volver a lo anterior. Si la emisora FM guardada tiene un programa adicional, también puede seleccionar al presionar el botón numérico repetidamente hasta recibir el programa adicional que desea. El programa cambia de la manera siguiente: Programa principal t Programa adicional 1 t Programa adicional 2... t Programa principal Nota Si esta unidad está apagada cuando se selecciona un programa adicional, la próxima vez que se encienda la unidad, se seleccionará el programa principal.
Si hay un iPod insertado en la unidad durante la recuperación de una canción etiquetada, la unidad comienza inmediatamente la transferencia de datos al iPod, después de que los datos se guardan. Cuando la unidad finaliza la transferencia de la información de una canción etiquetada al iPod, los datos guardados se borrarán de la unidad. Notas • No retire el iPod ni abra el panel frontal mientras “TRANSFER” esté destellando en la pantalla.
Reproducción repetida y aleatoria 1 Durante la reproducción, presione (3) (REP) o (4) (SHUF) varias veces hasta que aparezca el ajuste deseado. Seleccione Dispositivos USB Para obtener más información acerca de la compatibilidad del dispositivo USB, visite el sitio web de soporte técnico. Para reproducir TRACK pistas en forma repetida. Sitio Web de soporte técnico en línea ALBUM* álbumes en forma repetida. http://esupport.sony.com http://www.xplodsony.
Si ya hay un dispositivo USB conectado, presione (SOURCE) varias veces hasta que aparezca “USB” para empezar la reproducción. Presione (OFF) para detener la reproducción. Extracción del dispositivo USB 1 Detenga la reproducción del dispositivo USB. 2 Extraiga el dispositivo USB. Si extrae el dispositivo USB durante la reproducción, es posible que se dañe la información contenida en el dispositivo USB.
Sugerencia Para ello, le recomendamos que utilice el cable RC-100IP USB (no suministrado). iPod Para obtener más información acerca de la compatibilidad de su iPod, consulte “Acerca de iPod” en la página 23 o visite el sitio web de soporte técnico. En el manual de instrucciones, el “iPod” se utiliza como referencia general para las funciones del iPod en el iPod y el iPhone, salvo que el texto o las ilustraciones especifiquen lo contrario. Sitio Web de soporte técnico en línea http://esupport.sony.
Elementos de la pantalla Reproducción repetida y aleatoria 1 Durante la reproducción, presione (3) (REP) o (4) (SHUF) varias veces hasta que aparezca el ajuste deseado. Seleccione A Indicación de la fuente (iPod) B Nombre de la pista, Nombre del artista, Nombre del álbum, Número de pista/tiempo de reproducción transcurrido, Reloj Para cambiar los elementos de la pantalla B, presione (DSPL).
Utilización directa del iPod — Control de pasajero Puede utilizar directamente un iPod conectado al conector de base. 1 Durante la reproducción, mantenga presionado (MODE). Aparece “MODE IPOD” y podrá utilizar el iPod directamente. Para cambiar el elemento en pantalla Presione (DSPL). Los elementos en pantalla cambian de la manera siguiente: Nombre de la pista t Nombre del artista t Nombre del álbum t MODE IPOD t Reloj Para salir del modo de control de pasajero Mantenga presionado (MODE).
Personalización de la curva de ecualizador — EQ3 “CUSTOM” de EQ3 le permite realizar sus propios ajustes en el ecualizador. 1 Seleccione una fuente y presione el botón de selección varias veces para seleccionar “EQ3”. 2 Gire el selector de control para seleccionar “CUSTOM”. 3 Presione el botón de selección varias veces hasta que aparezca “LOW”, “MID” o “HI”. 4 Gire el selector de control para ajustar el elemento seleccionado.
LPF NORM/REV (Filtro de paso bajo normal/ invertido) Selecciona la fase del altavoz potenciador de graves: “NORM”, “REV”. HPF (Filtro de paso alto) Selecciona la frecuencia de corte del altavoz frontal/posterior: “OFF”, “80Hz”, “100Hz”, “120Hz”, “140Hz”, “160Hz”. LOUD (Sonoridad) Refuerza los graves y agudos para proporcionar un sonido más nítido en niveles de volumen bajos: “ON”, “OFF”. BTM (página 13) TAG ERASE (página 15) * Cuando la unidad está apagada.
Información complementaria Precauciones • Deje que la unidad se enfríe antes de usarla si el automóvil ha estado estacionado bajo la luz directa del sol. • La antena motorizada se extiende automáticamente. Condensación de humedad Si se produce condensación de humedad en el interior de la unidad, extraiga el disco y espere una hora aproximadamente hasta que se haya evaporado la unidad. De lo contrario, la unidad no funcionará correctamente.
*1 La función de control del control del pasajero no se encuentra disponible en el modelo de iPod nano primera generación ni en el iPod con video. *2 iTunes Tagging no se encuentra disponible en los modelos de iPod nano primera generación, segunda generación ni en el iPod con video.
Extracción de la unidad 1 Especificaciones Extraiga el marco de protección. Sección del sintonizador 1 Extraiga el panel frontal (página 7). FM 2 Sujete el marco de protección por ambos bordes y extráigalo.
Controles de tono: Graves: ±10 dB a 60 Hz (XPLOD) Medios: ±10 dB a 1 kHz (XPLOD) Agudos: ±10 dB a 10 kHz (XPLOD) Requisitos de alimentación: batería de automóvil de cc 12 V (masa negativa (tierra)) Dimensiones: aprox. 178 × 50 × 182 mm (an/al/prf) Dimensiones de montaje: aprox. 182 × 53 × 162 mm (an/al/prf) Peso: aprox.
Los elementos de pantalla no se desplazan. • Puede que los elementos de la pantalla con muchos caracteres no se desplacen. • “A.SCRL” está ajustado en “OFF”. t Ajuste “A.SCRL-ON” (página 21). t Mantenga presionado (DSPL) (SCRL). La función de desconexión automática no funciona. La unidad está encendida. La función de desconexión automática se activa después de apagar la unidad. t Apague la unidad. La función DSO no está disponible.
Mensajes/indicaciones de error CHECKING La unidad está confirmando la conexión de un dispositivo USB. t Espere mientras finaliza el proceso de confirmación de la conexión. ERROR • El disco está sucio o se insertó al revés. t Límpielo o insértelo de forma correcta. • Se insertó un disco vacío. • No es posible reproducir el disco debido a un problema. t Inserte otro disco. • El dispositivo USB no ha sido reconocido automáticamente. t Conéctelo nuevamente. • Presione Z para extraer el disco.
“ ”o“ ” Durante la operación de avance o retroceso rápido, llegó al principio o al final del disco, por lo que no es posible continuar. “ ” No se puede mostrar el carácter con la unidad. Si estas soluciones no ayudan a mejorar la situación, póngase en contacto con el distribuidor Sony más cercano. Si entrega la unidad para su reparación a causa de problemas en la reproducción de CD, lleve el disco que se utilizó cuando se produjo el problema.
If you have any questions/problems regarding this product, try the following: 1 Read Troubleshooting in these Operating Instructions. 2 Reset the unit. Note: Stored data may be erased. 3 Please contact (U.S.A. only); Call 1-800-222-7669 URL http://www.SONY.com http://www.sony.