2-586-723-11 (1) Cyber-shot Station Operating Instructions GB Mode d’emploi FR CSS-PHB 2005 Sony Corporation
English Before operating the product, please read this manual thoroughly and retain it for future reference. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For Customers in the U.S.A. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Features The CSS-PHB can be used with the DSC-P200 digital still camera. When you place a digital still camera (here in after referred to as the "camera") on the Cyber-shot Station, you can use the Cyber-shot Station in the following way. z You can easily view images on a TV screen by wireless remote control.
Index Precautions .......................................................................................................................... 6 Before using the Cyber-shot Station ................................................................................ 6 Identifying the parts ........................................................................................................... 7 Set up ...............................................................................................................
Precautions • The Cyber-shot Station is not a dust-proofed, moist-proofed or water proofed product. • Do not use or keep the Cyber-shot Station in locations subject to the following conditions: – Locations with extremes of temperature In closed automobiles during summer, the ambient temperature may be very hot, causing deformation or malfunction of the Cyber-shot Station. – Locations in direct sunlight or near heaters This may cause deformation or malfunction of the Cyber-shot Station.
Identifying the parts Cyber-shot Station Remote sensor INTERVAL SHOT button Interval selector Multi connector Interval Shot lamp CHARGE lamps A/V OUT (MONO) jack POWER lamp (USB) jack Remote sensor DC IN jack Remote Control SHUTTER button POWER button PRINT button Zoom (W/T) button Control buttons (v/V/b/B/ ) MENU button (Display / LCD on/off) button The remote control buttons share the functions as the ones on your camera.
Preparing the remote control Set up Preparing the Cyber-shot Station Connect the AC adaptor to the DC IN jack of the Cyber-shot Station. Cyber-shot Station DC plug AC adaptor To a wall outlet (wall socket) Notes on the remote control • The remote control is powered by a button type lithium battery (CR2025) installed at the factory. To avoid draining the battery, an insulation sheet is inserted. Before using the remote control for the first time, remove the insulation sheet.
Charging the battery pack Place the camera with the battery pack inserted on the Cyber-shot Station. Viewing images on a TV screen 1 Charging starts automatically. Both the / CHG lamp of the camera and the CHARGE lamps of the Cyber-shot Station light up. Connect the A/V connecting cable (supplied) to the A/V OUT (MONO) jack of the Cyber-shot Station and the audio/ video input jacks of the TV.
Shooting images By connecting the Cyber-shot Station to a TV, you can shoot an image while checking it on the big screen. 1 Set the mode dial of the camera to the position you desire and turn on the camera. For further details, see the operating instructions supplied with the camera. 2 Adjust the camera angle using the rotating base of the Cyber-shot Station. Taking time-lapse photos by Interval Shot 3 Set shooting interval using the interval selector of the Cyber-shot Station.
Printing still images Even if you do not have a computer, you can easily print still images by connecting your camera directly or via Cyber-shot Station to a PictBridge compliant printer. 4 Display a still image you want to print using b/B. 5 Press PRINT button. The print setting screen appears. • Refer to the operating instructions supplied with the camera for details on the printer settings, such as number of printing images, paper size and USB setting.
Connecting the camera to your computer via the Cyber-shot Station 1 2 Replacing the button type lithium battery * Do not use any batteries other than CR2025. 1 Pull out the battery holder while pushing the tab on the holder. 2 Take out the button type lithium battery from the holder. 3 Put a new battery into the holder with its + side facing upward. 4 Insert the holder into the remote control until it clicks.
Troubleshooting If you have trouble with your camera, try the following solutions. If the trouble persists, contact your Sony dealer. Symptom Cause/Solution Unable to charge the battery pack • The camera is turned on. t Turn the camera off. • The AC adaptor is disconnected. t Properly connect the AC adaptor. • The camera is not placed on the Cyber-shot Station correctly. t Place the camera correctly. • The battery pack is not installed correctly. t Install the battery pack correctly.
Symptom Cause/Solution The connection between the printer and the Cyber-shot Station cannot be established • The printer may not be PictBridge-compliant. t Ask the printer manufacturer whether your printer is PictBridge-compliant. • The printer is not set for the connection with the camera. t Be sure that the printer is on to connect with the camera. Unable to print images • The Cyber-shot Station is not connected to the printer properly.
Specifications Cyber-shot Station Input/Output connectors A/V OUT (MONO) jack (Monaural) Minijack Video*: 1 Vp-p, 75 Ω, unbalanced, sync negative Audio*: 327 mV (47 kΩ loaded) Output impedance: 2.2 kΩ * When the DSC-P200 is connected. USB jack: mini-B DC IN jack Multi connector General Dimensions (Approx.): 146 × 50 × 82 mm (5 3/4 × 2 × 3 1/4 inches) (w/h/d) Mass (Approx.): 150 g (5.
Français Avant d’utiliser cet appareil, lisez attentivement ce mode d’emploi et conservez-le pour toute référence ultérieure. AVERTISSEMENT Pour ne pas risquer un incendie ou une décharge électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. Note pour les clients européens Ce produit a fait l’objet d’essais ayant permis de constater qu’il respectait les limites prescrites par la directive sur la CEM sur l’utilisation de câbles de raccordement de moins de 3 mètres (9,8 pieds).
Caractéristiques Le CSS-PHB peut être utilisé avec l’appareil photo numérique DSC-P200. Si vous placez un appareil photo numérique (appelé ci-après « appareil photo ») sur la Cyber-shot Station, vous pouvez utiliser celle-ci de la manière suivante. z Vous pouvez facilement visualiser les images sur l’écran d’un téléviseur via la télécommande.
Index Précautions .......................................................................................................................... 5 Avant d’utiliser la Cyber-shot Station ............................................................................. 5 Identification des différents éléments .............................................................................. 6 Installation .....................................................................................................................
Précautions • La Cyber-shot Station ne doit pas être soumise à la poussière, à l’humidité et à l’eau. • N’utilisez pas et ne rangez pas la Cyber-shot Station dans les endroits suivants : – Endroits soumis à des températures extrêmes La température à l’intérieur d’une voiture fermée pendant l’été peut être très élevée et risque de déformer la Cyber-shot Station ou d’entraîner un problème de fonctionnement.
Identification des différents éléments Cyber-shot Station Capteur à distance Touche INTERVAL SHOT Sélecteur d’intervalles Témoin Interval Shot Témoins CHARGE Multiconnecteur Prise A/V OUT (MONO) Prise Témoin POWER (USB) Capteur à distance Prise DC IN Télécommande Touche SHUTTER Touche POWER Touche PRINT Touche de Zoom (W/T) Touches de commande (v/V/b/B/ ) Touche MENU Touche (activation/désactivation de l’affichage / écran LCD) Les fonctions des touches de la télécommande sont les mêmes que celles
Installation Préparation de la Cyber-shot Station Raccordez l’adaptateur secteur à la prise DC IN de la Cyber-shot Station. Cyber-shot Station • Eloignez le capteur à distance de la Cybershot Station des sources de lumière fortes telles que la lumière directe du soleil ou un plafonnier. Sinon, la télécommande risque de ne pas fonctionner correctement. • La télécommande fonctionne dans un rayon inférieur à cinq mètres (lorsqu’elle est utilisée à l’intérieur).
Recharge de la batterie Insérez la batterie dans l’appareil photo, puis placez-le sur la Cyber-shot Station. La charge commence automatiquement. Le témoin /CHG de l’appareil photo et les témoins CHARGE de la Cyber-shot Station s’allument. Visualisation d’images sur un écran de téléviseur 1 Raccordez le câble de liaison audio et vidéo (fourni) à la prise A/V OUT (MONO) de la Cyber-shot Station et aux prises d’entrée audio/vidéo du téléviseur.
5 Appuyez sur les touches de commande b/B de la télécommande pour sélectionner l’image de votre choix. – Vous pouvez aussi sélectionner l’image en appuyant sur les touches de commande b/B de l’appareil photo. – La Cyber-shot Station est compatible avec les systèmes de télévision NTSC et PAL. Pour plus d’informations, reportezvous au mode d’emploi fourni avec l’appareil photo.
• Pendant la prise de vues à intervalle, l’appareil photo est mis hors tension à chaque prise de vues. Le zoom et le retardateur reviennent donc à leurs valeurs par défaut. • Vous ne pouvez pas utiliser la télécommande pendant la prise de vues à intervalle. Impression d’images fixes Même si vous ne disposez pas d’un ordinateur, vous pouvez aisément imprimer des images fixes en raccordant votre appareil photo à une imprimante compatible PictBridge soit directement, soit via une Cyber-shot Station.
Raccordement de l’appareil photo à votre ordinateur via la Cyber-shot Station 1 Raccordez la Cyber-shot Station à votre ordinateur à l’aide du câble USB fourni avec la Cyber-shot Station. ATTENTION Danger d’explosion en cas de remplacement incorrect de la batterie. Remplacez la batterie uniquement par une batterie de type identique ou similaire recommandé par le fabricant. Mettez les batteries usées au rebut conformément aux instructions du fabricant.
Dépannage Si vous rencontrez des problèmes avec votre appareil photo, essayez les solutions suivantes. Si les problèmes persistent, contactez votre revendeur Sony. Symptôme Cause/Solution Impossible de charger la batterie • L’appareil photo est sous tension. t Mettez-le hors tension. • L’adaptateur secteur est débranché. t Raccordez correctement l’adaptateur secteur. • L’appareil photo n’est pas placé correctement sur la Cyber-shot Station. t Placez correctement l’appareil photo.
Symptôme Cause/Solution Impossible d’établir la connexion entre l’imprimante et la Cyber-shot Station • L’imprimante n’est pas compatible PictBridge. t Demandez au fabricant de l’imprimante si elle est compatible PictBridge. • N’imprimante n’est pas réglée pour être raccordée à l’appareil photo. t Vérifiez si l’imprimante est sous tension et si elle peut être raccordée à l’appareil photo. Impossible d’imprimer des photos • La Cyber-shot Station n’est pas correctement raccordée à l’imprimante.
Symptôme Cause/Solution Impossible de démarrer la prise de vues à intervalle • L’adaptateur secteur est débranché. t Raccordez correctement l’adaptateur secteur. • Le sélecteur d’intervalle n’est pas réglé correctement. t Réglez correctement le sélecteur d’intervalles. La prise de vues à intervalle se poursuit même lorsque le « Memory Stick » est saturé • La prise de vues à intervalle permet de prendre jusqu’à 12 vues consécutives.
Spécifications Cyber-shot Station Connecteurs d’entrée/de sortie Prise A/V OUT (MONO) (monaural) Miniprise Vidéo*: 1 Vp-p, 75 Ω, asymétrique, sync négative Audio*: 327 mV (à une charge de 47 kΩ) Impédance de sortie : 2,2 kΩ * Lorsque le DSC-P200 est raccordé.
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Imprimé sur papier 100 % recyclé avec de I’encre á base d’huile végétale sans COV (composés organiques volatils).