4-125-250-11(1) Digital Video Camera Recorder Enjoying with Your Camcorder 11 Getting Started 19 Recording/Playback 32 Operating Guide DCR-DVD150E/DVD450E/ DVD650E/DVD850E Editing 47 Utilizing Media 65 Customizing Your Camcorder 77 Performing with Your Computer 93 GB Troubleshooting 100 Additional 112 Information Quick 126 Reference Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. http://www.sony.
Read this before operating your camcorder Before operating the unit, please read this manual thoroughly, and retain it for future reference. WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. Do not expose the batteries to excessive heat such as sunshine, fire or the like. CAUTION Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. Use the nearby wall outlet (wall socket) when using the AC Adaptor.
FOR CUSTOMERS IN EUROPE ATTENTION The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet). Notice If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
Read this before operating your camcorder (Continued) For customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: DCR-DVD650E Responsible Party:Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.
– 8cm DVD-RW – 8cm DVD+RW – 8cm DVD-R – 8cm DVD+R DL Use the discs with marks listed below. See page 12 for details. For reliability and durability of recording/ playback, we recommend using Sony discs. b Note • Using an uncertificated disc may in a few case cause unsatisfactory recording/playback.
Read this before operating your camcorder (Continued) • When connecting your camcorder to another device with a cable, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of your camcorder. About menu items, LCD panel, viewfinder, and lens • A menu item that is grayed out is not available under the current recording or playback conditions.
the camcorder, it is recommended that you destroy the actual body of the camcorder. About the Carl Zeiss lens Your camcorder is equipped with a Carl Zeiss lens, which was developed jointly by Carl Zeiss, in Germany, and Sony Corporation, and produces superior images. It adopts the MTF measurement system for video cameras and offers a quality typical of a Carl Zeiss lens. MTF = Modulation Transfer Function. The number value indicates the amount of light from a subject coming into the lens.
Table of Contents Read this before operating your camcorder .................................... 2 Table of Contents ........................... 8 Subject examples and solutions ... 10 Enjoying with Your Camcorder Enjoy using various “Media” according to your needs ............. 11 Media for your camcorder ............ 12 Using your camcorder .................. 14 “ HOME” and “ OPTION” - Taking advantage of two types of menus .........................................
Formatting media .......................... 71 Recording additional movies after finalizing ..................................... 73 Finding the right disc (DISC SELECT GUIDE) ....................................... 74 Repairing the image database file ..................................................... 75 Preventing data on the internal memory from being recovered (DCR-DVD450E/DVD850E) ....... 76 Customizing Your Camcorder What you can do with the (SETTINGS) category of the HOME MENU ...................
Subject examples and solutions Shooting Flowers in close-up B PORTRAIT ...................................... 90 B FOCUS............................................ 89 B TELE MACRO ................................. 89 Focusing on the dog on the left side of the screen B SPOT MTR/FCS .............................. 88 B FOCUS............................................ 89 B SPOT FOCUS.................................. 88 Getting a good shot of a ski slope or beach B Backlight ..............................
Enjoying with Your Camcorder Enjoy using various “Media” according to your needs Selecting media Enjoying with Your Camcorder You can select desired media for recording/playback/editing from the internal memory (DCRDVD450E/DVD850E), a disc or “Memory Stick PRO Duo” media (p. 26). To set the media for movies or still images, you can select either [MOVIE MEDIA SET] or [PHOTO MEDIA SET] (DCR-DVD450E/DVD850E) according to your needs.
Media for your camcorder With your camcorder, you can record images on either the internal memory (DCR-DVD450E/ DVD850E), an 8cm DVD-RW, DVD+RW, DVD-R or DVD+R DL disc, or “Memory Stick PRO Duo” media. See page 5 for the types of “Memory Stick” media you can use in your camcorder. Recording format for DVD-RW When you use a DVD-RW, you can choose the recording format from VIDEO mode or VR mode. In this manual, VIDEO mode is indicated as and VR mode as .
Recording time of movies Media type * 9M (HQ) (high quality) 230 (205) 20 (18) 6M (SP) (standard quality) 3M (LP) (long play) 35 (32) 340 (205) 30 (18) 55 (32) 5.1ch* 655 (435) 60 (44) 110 (80) 2ch 715 (460) 65 (46) 125 (90) Enjoying with Your Camcorder Figures in the table are the approximate recording time in minutes using the internal memory (DCR-DVD450E/DVD850E) and on one side of a disc.
Using your camcorder 1Selecting media (p. 26) You can select media separately for movies and still images. In the case of recording on a disc, select the disc that best suits your needs. Do you want to delete or edit images on your camcorder? Yes No Do you want to delete images and reuse the disc? Yes No For long recording * Select the recording format and format the disc on your camcorder (p. 28). zTips • You can select the disc from [DISC SELECT GUIDE] (p. 74). 2Recording images (p.
4Viewing on other devices x Viewing images on a TV (p. 45) You can view the images recorded and edited on your camcorder on the connected TV. bNotes • The less the recording volume of the disc is, the more it takes time to finalize the disc. The features of a finalized disc depend on disc type. Like commercially sold DVD, this disc can be played back in most DVD devices after finalizing. Recordings cannot be added even if there is free space left.
“ HOME” and “ OPTION” - Taking advantage of two types of menus “ HOME MENU” - the starting point for operations with your camcorder (HELP) Displays a description of the item (p.
Using the HOME MENU 1 While pressing the green button, 4 Touch the desired item. Example: [EDIT] 5 Follow the guide on the screen for further operation. Enjoying with Your Camcorder turn the POWER switch in the direction of the arrow to turn on your camcorder. To hide the HOME MENU screen 2 Press Touch (HOME) A (or B). (HOME) A . When you want to know something about the function of each item on the HOME MENU - HELP 1 Press (HOME). The HOME MENU appears.
“ HOME” and “ (Continued) OPTION” - Taking advantage of two types of menus 3 Touch the item you want to know the content. When you touch an item, its explanation appears on the screen. To apply the option, touch [YES], otherwise, touch [NO]. To deactivate the HELP Touch (HELP) again in step 2. Using the OPTION MENU Just a touch on the screen during shooting or playback displays the functions available at that moment. You will find it easy to make various settings. See page 86 for further details.
Getting Started Step 1: Checking supplied items Make sure that you have the following items supplied with your camcorder. The number in the parentheses indicates the number of that item supplied. Rechargeable battery pack NP-FH30 (1) (p. 20) AC Adaptor (1) (p. 20) – PMB (software) including “PMB Guide” Operating Guide (This manual) (1) Power cord (mains lead) (1) (p. 20) Getting Started CD-ROM “Handycam Application Software” (1) (p. 93) A/V connecting cable (1) (p. 45, 62) USB cable (1) (p.
Step 2: Charging the battery pack POWER switch DC IN jack Battery CHG (charge) lamp Jack cover To the wall outlet (wall socket) AC Adaptor DC plug You can charge the “InfoLITHIUM” battery pack (H series) (p. 117) after attaching it to your camcorder. b Notes • Your camcorder operates only with “InfoLITHIUM” battery pack (H series). 1 Turn the POWER switch in the direction of the arrow to OFF (CHG) (the default setting).
To remove the battery pack Recording time 1 Turn the POWER switch to OFF (CHG). Approximate time (min.) available when you use a fully charged battery pack. 2 Slide the BATT (battery) release lever (1) and remove the battery pack (2). When recording on the internal memory (DCR-DVD450E/DVD850E) or “Memory Stick PRO Duo” media BATT (battery) release lever To use a power source from a wall outlet (wall socket) Make the same connections as you do when charging the battery pack.
Step 2: Charging the battery pack (Continued) Playing time Approximate time (min.) available when you use a fully charged battery pack.
Step 3: Turning the power on, and setting the date and time Set the date and time when using this camcorder for the first time. If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder or change the POWER switch position. Touch the button on the LCD screen. 3 Select the desired geographical area with [NEXT]. / , then touch 4 Set [SUMMERTIME], then touch [NEXT].
Step 3: Turning the power on, and setting the date and time (Continued) b Notes • If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the built-in rechargeable battery and then set the date and time again (p. 122). • It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. You cannot operate your camcorder during this time.
Step 4: Making adjustments before recording Opening the lens cover Slide the LENS COVER switch to OPEN. • Touch (HOME) t (SETTINGS) t [SOUND/DISP SET] t [LCD BRIGHT] (p. 83), and adjust the brightness of the LCD screen. • The information is displayed or hidden (display y no display) each time you press DISP. Adjusting the viewfinder After recording, set the LENS COVER switch to CLOSE to close the lens cover.
Step 5: Selecting media You can set the media to be used for movies and still images separately. For movies, you can select the internal memory*, a disc, or “Memory Stick PRO Duo” media. For still images, you can select the internal memory*, or “Memory Stick PRO Duo” media. DCR-DVD150E/DVD650E In the default setting, movies are recorded on a disc. Still images are recorded on “Memory Stick PRO Duo” media only.
Selecting media for still images (DCR-DVD450E/DVD850E) 1 Touch (HOME) t (MANAGE MEDIA) t [PHOTO MEDIA SET]. 2 Touch the desired media. b Notes • You cannot select a disc for the still image media. 3 Touch [YES]. 1 Slide the POWER switch to turn on the lamp of the mode ( (Movie)/ (Still)) that you want to check the media. 2 Confirm the media icon displayed at the upper right corner of the screen. Media icon Getting Started The still image media setting screen appears.
Step 6: Inserting a disc or “Memory Stick PRO Duo” media When you select [INT. MEMORY] in “Step 5,” this “Step 6” operation is unnecessary (DCR-DVD450E/DVD850E). Inserting a disc 3 Set the disc with the recording side facing your camcorder, then press the center of the disc until it clicks. When you select [DISC] in “Step 5,” a new 8 cm DVD-RW, DVD+RW, DVD-R, or DVD+R DL is required (p. 12). b Notes • Remove dust or fingerprints from the disc beforehand, using a soft cloth (p. 116).
5 Touch the option that is right for you on the screen. x DVD-RW Select the recording format, [VIDEO] . or [VR] (p. 12), then touch Select the aspect ratio of the movie, . [16:9 WIDE] or [4:3], then touch 6 Touch [YES]. 7 When [Completed.] is displayed, touch . When the formatting is completed, you can start recording on the disc. z Tips • When you use a DVD-RW while the Easy Handycam operation (p. 32) is set, the recording format is fixed to VIDEO mode.
Step 6: Inserting a disc or “Memory Stick PRO Duo” media (Continued) Inserting “Memory Stick PRO Duo” media This operation is necessary only when you select [MEMORY STICK] in “Step 5.” See page 5 on the “Memory Stick” media you can use with your camcorder. z Tips • If you record only still images on the “Memory Stick PRO Duo” media, operations after step 3 are unnecessary. 3 If you select [MEMORY STICK] in “Step 5” for movie recording, slide the POWER switch repeatedly until the (Movie) lamp lights up.
To remove the “Memory Stick PRO Duo” media Open the LCD panel and “Memory Stick Duo” media cover. Lightly push the “Memory Stick PRO Duo” media in once, then slide it out of the slot. • • b Notes • • Getting Started • To prevent media from being broken or recorded images from being lost, do not do the following when the access lamp ( p.
Recording/Playback Recording and playing back with ease (Easy Handycam operation) Easy Handycam operation makes nearly all settings automatic so that you can perform recording or playing back operation without detailed settings. It also makes the screen font size larger for easy viewing. The images are recorded on the selected media (p. 26). If the POWER switch is set to OFF (CHG), turn it while pressing the green button.
Playing back recorded movies/still images 1 Turn the POWER switch G to turn on your camcorder. 2 Press (VIEW IMAGES) I (or D). The VISUAL INDEX screen appears on the screen. (It may take some time to display the thumbnails.) Film Roll Index (p. 42) Face Index (p. 42) Previous 6 images Appears with the image on each of the tab that was lastly played back/recorded (B for the still image recorded on “Memory Stick PRO Duo” media). Next 6 images Returns to the recording screen. Displays movies.
Recording and playing back with ease (Easy Handycam operation) (Continued) zTips • When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX screen. • You can slow down the playback speed by touching / during pause. • You can adjust the volume by touching t adjust with / t during playback. • You can change the movie media with [MOVIE MEDIA SET] (p. 26). Still images: Touch the tab and the still image to be played back. Returns to the VISUAL INDEX screen.
To cancel Easy Handycam operation Press EASY A again. from the screen. disappears Menu settings during Easy Handycam operation Touch (HOME) C (or B) to display the menu items available for setup changes (p.16, 77). b Notes Invalid buttons during Easy Handycam operation Recording/Playback • Most of the menu items automatically return to the default settings. The settings of some menu items are fixed. For details, see page 78. • DVD-RW is formatted with VIDEO mode (p. 12).
Recording The images are recorded on the media selected on the media setting (p. 26). DCR-DVD150E/DVD650E In the default setting, movies are recorded on a disc. Still images are recorded on “Memory Stick PRO Duo” media only. DCR-DVD450E/DVD850E In the default setting, both movies and still images are recorded on the internal memory. Open the lens cover (p. 25). PHOTO F START/STOP B (HOME) E (HOME) D POWER switch A If the POWER switch is set to OFF (CHG), turn it while pressing the green button.
• You can check the free media space for movies by touching (MANAGE MEDIA) t [MEDIA INFO] (p. 70). Movies Still Images 1 Turn the POWER switch A until the (HOME) D (or E) t (Movie) lamp lights up. 2 Press START/STOP B (or C). To stop recording, press START/STOP again. the (Still) lamp lights up. 2 Press PHOTO F lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds).
Recording (Continued) Zooming You can magnify images up to 60 times the original size with the power zoom lever or the zoom buttons on the LCD frame. Recording sound with more presence (5.1ch surround recording) (DCR-DVD450E/ DVD850E) Sound picked up by the built-in microphone is converted to 5.1ch surround sound and recorded. Enjoy realistic sound when playing the movies on devices that support 5.1ch surround sound.
Adjusting the exposure for backlit subjects Recording in mirror mode Recording/Playback To adjust the exposure for backlit subjects, press . (Backlight) to display .. To cancel the back light function, press . (Backlight) again. Open the LCD panel 90 degrees to the camcorder (1), then rotate it 180 degrees to the lens side (2). z Tips • A mirror-image of the subject appears on the LCD screen, but the image will be normal when recorded.
Playback You can play back images recorded on the media selected in the media setting (p. 26). DCR-DVD150E/DVD650E In the default setting, movies on a disc are played. Still images are recorded and played on “Memory Stick PRO Duo” media only. DCR-DVD450E/DVD850E In the default setting, images in the internal memory are played. POWER switch A (HOME) D (HOME) E (VIEW IMAGES) B (VIEW IMAGES) C 1 Turn the POWER switch A to turn on your camcorder. 2 Press (VIEW IMAGES) B (or C).
3 Start playback. Movies Touch the tab and the movie to be played back. When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX screen. Returns to the VISUAL INDEX screen. Volume adjustment Stops (goes to the VISUAL INDEX screen.) SP 14/14 0:00:14 VOL 101-0014 Toggles Play or Pause as you touch. Next movie (OPTION) Reverse/ Forward z Tips • Touch / during pause to play back movie slowly.
Playback (Continued) To adjust the sound volume of movies While playing back movies, touch t adjust with / t . You can adjust the sound volume from the OPTION MENU. 4 Touch / to search for the desired scene, then touch the scene you want to play back. Playback starts from the selected scene. z Tips • You can switch screen to the VISUAL INDEX screen by touching (HOME) D (or E) t (VIEW IMAGES) t [VISUAL INDEX].
4 Touch / to search for the desired face image, then select the face image of the scene you want to play back. Playback starts from the selected scene. 2 To search for movies, touch the tab. To search for still images, touch the tab. 3 Touch the date button at the upper right corner of the screen. b Notes z Tips • You can display the Face Index screen by touching (HOME) t (VIEW IMAGES) t [ FACE]. Searching for desired images by date (Date Index) You can efficiently search for desired images by date.
Playback (Continued) b Notes • You cannot operate playback zoom during slide show. z Tips 1 Play back the still image you want to magnify. 2 Magnify the still image with T (Telephoto). The screen is framed. 3 Touch the screen at the point you want to display in the center of the displayed frame. 4 Adjust the magnification with W (Wide angle)/T (Telephoto). To cancel, touch . Playing back a series of still images (Slide show) Touch on the still image playback screen.
Playing the images on a TV Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable 1 or an A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 20). Refer also to the instruction manuals supplied with the devices to be connected.
Playing the images on a TV (Continued) b Notes • When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image’s aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter. • When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the 16:9 (wide) signal, set [TV TYPE] to [4:3].
Editing (OTHERS) category This category enables you to edit images on the media, or copy them onto your computer for viewing, editing or creating an original DVD. PLAYLIST EDIT You can create and edit a Playlist (p. 59). USB CONNECT You can connect your camcorder to a computer or another device using the USB cable (p. 93). BATTERY INFO (OTHERS) category You can check the approximate remaining battery level (p. 64).
Deleting images b Notes 5 Touch • You cannot restore images once they are deleted. z Tips t [YES]. 6 When [Completed.] appears, • You can select up to 100 images at one time. touch . Deleting movies To delete all movies at one time Select beforehand the media which contains the movie you want to delete (p. 26). 1 In step 3, touch [ b Notes 2 Touch [YES] t [YES]. • When you select [DISC] on [MOVIE MEDIA SET] (p. 26), you cannot delete movies during Easy Handycam operation (p. 32).
To delete the most recently recorded movie 1 Touch 1 In step 3, touch [ DEL]. 2 Touch [ DELETE]. 3 Touch [ DELETE]. 2 Touch (HOME) t (OTHERS) t [DELETE]. LAST SCENE t [YES]. 3 When [Completed.] appears, touch . 4 Touch the still image to be deleted. Editing You cannot delete the most recently recorded movie: – if you remove the disc from your camcorder after recording. – if you turn off your camcorder after recording.
Deleting images (Continued) To delete all the still images recorded on the same day at one time 1 In step 3, touch [ Capturing a still image from a movie (DCR-DVD450E/ DVD650E/DVD850E) You can capture a still image at any point during movie playback. Select the media which contains the movies beforehand, and the media where you want to save the still images (p. 26). When you select [MEMORY STICK] to save the still images, insert “Memory Stick PRO Duo” media beforehand.
b Notes 2 Touch the movie that you want to • The media where you want to save still images has to have enough free space. • Recording date and time of created still images are the same as the recording date and time of the movies. • If the movies do not have data code, recording date and time of still images are saved as the time you create them from the movies. play back and capture an image from. The selected movie is played back. 3 Touch The movie pauses.
Dubbing/copying images to media within your camcorder (DCR-DVD450E/DVD650E/DVD850E) Dubbing movies (DCRDVD450E/DVD650E/DVD850E) You can dub movies from the internal memory (DCR-DVD450E/DVD850E) or “Memory Stick PRO Duo” media (DCRDVD650E/DVD850E) to a disc. Insert a disc in your camcorder beforehand. The media you can select depends on your camcorder model. See the table below. Model From To DCRDVD450E DCRDVD650E t DCRDVD850E t The [MOVIE DUB] screen appears.
If the disc space is not sufficient to record the entire movie, [Not enough memory space.] appears. 5 Touch 2 Touch [YES]. 3 When [Completed.] appears, touch To back up movies that have not been backed up yet t [YES]. 1 In step 3, touch [BACKUP]. 2 Touch [Backs up unbacked up movies.] t [YES]. 6 When [Completed.] appears, touch . . 1 In step 3, touch [DUB by date].
Dubbing/copying images to media within your camcorder (DCR-DVD450E/ DVD650E/DVD850E) (Continued) z Tips • To check the copied still images, select [MEMORY STICK] on [PHOTO MEDIA SET] (p. 27). To copy all the still images recorded on the same day at one time 1 In step 2, touch [COPY by date]. 1 Touch (HOME) t (OTHERS) t [PHOTO COPY]. The [PHOTO COPY] screen appears. Previous/Next date 2 Touch [COPY by select]. 3 Touch the still image to be copied.
Protecting images You can protect recorded movies or still images from accidental deletion. 5 Touch t [YES]. z Tips • You can select up to 100 images at one time. Protecting movies 6 When [Completed.] appears, touch . To unprotect movies Select beforehand the media which contains the movie you want to protect (p. 26). (HOME) t (OTHERS) t [EDIT]. 2 Touch [ PROTECT]. 3 Touch [ PROTECT]. Editing 1 Touch In step 4, touch the movie marked with -. - disappears.
Protecting images (Continued) To unprotect all the movies recorded on the same day at one time In step 2, select the recording date of the desired movies, then touch t [OFF]. When [Completed.] appears, touch . b Notes • Do not remove the battery pack or the AC Adaptor from your camcorder while protecting movies. • Do not remove the “Memory Stick PRO Duo” media while protecting movies from the “Memory Stick PRO Duo” media. • Formatting (p. 71) deletes even protected movies.
To unprotect still images • Do not remove the “Memory Stick PRO Duo” media while protecting still images from the “Memory Stick PRO Duo” media. • Formatting (p. 71) deletes even protected still images. In step 4, touch the still image marked with -. - disappears. z Tips To protect all the still images recorded on the same day at one time 1 In step 3, touch [ • You can protect a still image when viewing it by touching (OPTION). PRT. by date].
Dividing movies b Notes at the point where you want to divide. • You cannot restore movies once they are divided. • Do not remove the battery pack or the AC Adaptor from your camcorder while dividing movies. • Do not remove the “Memory Stick PRO Duo” media while dividing movies in the “Memory Stick PRO Duo” media. • When you select [INT. MEMORY] (DCRDVD450E/DVD850E) or [MEMORY STICK] on [MOVIE MEDIA SET] (p.
Creating the Playlist 4 Touch A Playlist is a list showing thumbnails of the movies that you have selected. The original scenes are not changed even though you edit or delete the movies in the Playlist. Select beforehand the media to use to create, play, or edit a Playlist (p. 26). t [YES]. 5 When [Completed.] appears, touch . To add all the movies to the Playlist z Tips 1 In step 2, touch [ 3 When [Completed.] appears, touch .
Creating the Playlist (Continued) b Notes • Do not remove the battery pack or the AC Adaptor from your camcorder while adding the movies. • Do not remove the “Memory Stick PRO Duo” media while adding movies in the “Memory Stick PRO Duo” media. • You cannot add still images to a Playlist. z Tips • You can add a movie when viewing it by touching (OPTION). • You can copy the Playlist to a disc as it is, by using the supplied software.
To change the order within the Playlist To divide a movie in the Playlist 1 Touch (HOME) t t [PLAYLIST EDIT]. 1 Touch (HOME) t t [PLAYLIST EDIT]. 2 Touch [ (OTHERS) MOVE]. 2 Touch [ 3 Select the movie that you want to move. (OTHERS) DIVIDE]. 3 Touch the movie that you want to divide. The selected movie is played back. 4 Touch at the point where you want to divide. The movie pauses. Play and pause toggles as you press . . Press and hold the movie on the screen to confirm. Touch screen.
Dubbing movies to VCR or DVD/HDD recorders Connecting a device with the A/V connecting cable You can dub movies played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. Connect the device in either of the following ways. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 20). Refer also to the instruction manuals supplied with the devices to be connected.
b Notes • To hide the screen indicators, such as a counter on the screen of the monitor device connected, touch (HOME) t (SETTINGS) t [OUTPUT SETTINGS] t [DISP OUTPUT] t [LCD PANEL] (the default setting) (p. 84). • To record the date/time and camera settings data, display them on the screen (p. 82).
Dubbing movies to VCR or DVD/ HDD recorders (Continued) Checking battery information 2 Connect the (USB) jack of your camcorder to a DVD writer, etc. using the supplied USB cable (p. 126). The [USB SELECT] screen appears on the camcorder screen. You can check the approximate remaining capacity of the attached battery. Touch (HOME) t t [BATTERY INFO]. (OTHERS) The remaining battery capacity is shown. 3 Touch media which contains the movie to be dubbed. 4 Start recording on the connected device.
Utilizing Media (MANAGE MEDIA) category This category enables you to use the media for various purposes. REPAIR IMG.DB F. You can repair the image database file of the internal memory (DCR-DVD450E/ DVD850E) or “Memory Stick PRO Duo” media (p. 75). (MANAGE MEDIA) category Item list MOVIE MEDIA SET You can select the media for movies (p. 26). You can select the media for still images (p. 26).
Making the disc compatible with playback on other devices (Finalizing) Finalizing makes the recorded disc compatible for playback with other devices and DVD drives of computers. Before finalizing, you can select the style of the DVD menu which displays the movie list (p. 68). Finalizing is required depending on the type of disc. • DVD-RW/DVD-R/DVD+R DL: Finalizing is required.
To add movies to a finalized disc (p.73) Movies cannot be added. Make a new recording Unfinalize the disc. Movies can be added as usual. When the DVD menu has been created, a confirmation screen prompts you to confirm that you wish to add movies. b Notes To play back a disc in other devices after adding movies (p.68) Playback on other devices Utilizing Media • During Easy Handycam operation (p.
Making the disc compatible with playback on other devices (Finalizing) (Continued) Finalizing a disc b Notes • It takes from a minute to a maximum of several hours to finalize a disc. The shorter the amount of material recorded on the disc, the longer it takes for finalizing. 5 Touch [YES] t [YES]. Finalizing starts. 6 When finalizing is completed, touch . 1 Place your camcorder in a stable place, and connect the AC Adaptor to the DC IN jack on your camcorder. 2 Turn on your camcorder.
Playing a disc on other devices b Notes • During Easy Handycam operation (p. 32), the DVD menu style is fixed to [STYLE1]. • You cannot create a DVD menu for a DVD-RW (VR mode). Playing a disc on other devices Finalizing a disc (p. 66) allows you to view movies recorded by your camcorder on other DVD devices. However, we do not guarantee proper playback on all devices. You can play back DVD+RW on other devices without finalizing the disc.
Playing a disc on other devices (Continued) Checking media information z Tips You can check the remaining recordable time or space of the media selected on [MOVIE MEDIA SET] (p. 26). • For details on operations and procedures, see the “PMB Guide” on the supplied CD-ROM (p. 97). The volume label of the disc The date and time when the disc was first used is recorded. However, the date and time of finalizing may be recorded depending on the operating conditions.
Formatting media Formatting deletes all images and returns the recording media to its original empty state. To avoid the loss of important images, dub or copy them on other media (p. 52, 62) before performing [MEDIA FORMAT]. 6 When [Completed.] appears, touch . b Notes Formatting the internal memory (DCR-DVD450E/DVD850E) or “Memory Stick PRO Duo” media 1 Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the power cord (mains lead) to the wall outlet (wall socket).
Formatting media (Continued) 1 Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the power cord (mains lead) to the wall outlet (wall socket). 2 Turn on your camcorder. 3 Insert the disc to be formatted into your camcorder. 4 Touch (HOME) t (MANAGE MEDIA) t [MEDIA FORMAT] t [DISC]. x DVD-RW Select the recording format, [VIDEO] . or [VR] (p. 12), then touch x DVD+RW Select the aspect ratio of the movie, [16:9 WIDE] or [4:3], then touch . 5 Touch [YES]. 6 When [Completed.
Recording additional movies after finalizing 6 When [Completed.] appears, You can record additional movies on the finalized DVD-RW (VIDEO mode)/ DVD+RW discs after the following steps, if the disc has free space. When using the finalized DVD-RW (VR mode), you can record additional movies on the disc without any additional steps. b Notes • You cannot record additional movies on the DVD-R/DVD+R DL after finalizing. Use a new disc.
Recording additional movies after finalizing (Continued) Finding the right disc (DISC SELECT GUIDE) b Notes Select the option that is right for you on the screen, then you will be informed of the appropriate disc for your purposes. • Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor during the operation. • A DVD menu created during finalizing is deleted. • For a double-sided disc, perform these steps for each side of the disc.
Repairing the image database file b Notes This function checks the image database file and the consistency of movies and still images on the internal memory (DCRDVD450E/DVD850E), or movies in the “Memory Stick PRO Duo” media, and repairs any inconsistencies found. • Do not apply mechanical shock or vibration to the camcorder during this operation. • Do not disconnect the AC Adaptor or remove the battery pack.
Preventing data on the internal memory from being recovered (DCR-DVD450E/DVD850E) [ EMPTY] allows you to write unintelligible data onto the internal memory. In this way, it may become more difficult to recover any original data. When you dispose of or give the camcorder to somebody, it is recommended that you perform [ EMPTY]. 4 Touch [EMPTY]. The [ EMPTY] screen appears. b Notes • If you perform [ EMPTY], all the images are deleted.
Customizing Your Camcorder What you can do with the (SETTINGS) category of the HOME MENU You can change the recording functions and the operating settings for your convenience. Using the HOME MENU 3 Touch the desired setup item. If the item is not on the screen, touch / to change the page. 1 Turn on your camcorder, then press (HOME). (HOME) 4 Touch the desired item. If the item is not on the screen, touch / to change the page. (HOME) 2 Touch . (SETTINGS).
What you can do with the (Continued) (SETTINGS) category of the List of the (SETTINGS) category items MOVIE SETTINGS (p. 79) OUTPUT SETTINGS (p. 84) Items Page TV TYPE 84 DISP OUTPUT 84 Items Page REC MODE 79 AUDIO MODE*1 79 Items Page WIDE SELECT 79 CLOCK SET*2 23 DIGITAL ZOOM 79 AREA SET 84 STEADYSHOT 80 SUMMERTIME 84 AUTO SLW SHUTTR 80 GUIDEFRAME 80 REMAINING SET 80 FACE SET*2 80 Items IMAGE SIZE*2 CLOCK/ LANG (p. 84) LANGUAGE SET*2 84 GENERAL SET (p.
MOVIE SETTINGS (Items for recording movies) AUDIO MODE (DCRDVD450E/DVD850E) You can select audio recording format. B 5.1ch SURROUND ( ) Records 5.1ch surround sound. Touch 1, then 2. If the item is not on the screen, touch to change the page. / (HOME MENU) t page 77 (OPTION MENU) t page 86 The default settings are marked with B. REC MODE (Recording mode) ) Records in high quality mode. (9M (HQ)) ) Records in standard quality mode. (6M (SP)) LP ( ) Increases the recording time (Long Play).
MOVIE SETTINGS (Continued) 120× – When your camcorder recognizes the remaining media capacity when the POWER switch is set to (Movie). – When you press DISP to switch the indicator from off to on when the POWER switch is set to (Movie). – When you select the movie recording mode on the HOME MENU. Up to 60 × zoom is performed optically, and after that, up to 120 × zoom is performed digitally. 2000× Up to 60 × zoom is performed optically, and after that, up to 2,000 × zoom is performed digitally.
PHOTO SETTINGS (Items for recording still images) VGA (0.3M) 640 × 480 16GB 94000 b Notes Touch 1, then 2. If the item is not on the screen, touch to change the page. / How to set z Tips (HOME MENU) t page 77 (OPTION MENU) t page 86 The default settings are marked with B. IMAGE SIZE B VGA (0.3M) ( 640 × 480) 640 × 360) Records still images clearly in the 16:9 (wide) ratio.
VIEW IMAGES SET (Items to customize the display) CAMERA DATA Movie Touch 1, then 2. If the item is not on the screen, touch to change the page. / Still image How to set (HOME MENU) t page 77 (OPTION MENU) t page 86 The default settings are marked with B. DATA CODE C SteadyShot off D Brightness E White balance F Gain G Shutter speed H Aperture value I Exposure During playback, your camcorder displays the information (data code) recorded automatically at the time of recording.
SOUND/DISP SET (Items to adjust sound and the screen) LCD BL LEVEL (LCD backlight level) You can adjust the brightness of the LCD screen’s backlight. B NORMAL Standard brightness. Touch 1, then 2. If the item is not on the screen, touch to change the page. / Brightens the LCD screen. How to set b Notes (HOME MENU) t page 77 (OPTION MENU) t page 86 The default settings are marked with B. VOLUME Touch BRIGHT / to adjust the volume.
OUTPUT SETTINGS CLOCK/ LANG (Items for when connecting other devices) (Items to set clock and language) Touch 1, then 2. If the item is not on the screen, touch to change the page. Touch 1, then 2. If the item is not on the screen, touch to change the page. / How to set (HOME MENU) t page 77 The default settings are marked with B. TV TYPE See page 45. DISP OUTPUT B LCD PANEL Shows displays such as the time code on the LCD screen and in the viewfinder.
GENERAL SET (Other setup items) A.SHUT OFF (Auto shut off) B 5min The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes. Touch 1, then 2. If the item is not on the screen, touch to change the page. / NEVER The camcorder is not automatically turned off. How to set (HOME MENU) t page 77 The default settings are marked with B. DEMO MODE z Tips • The demonstration will be suspended in the following situations. – When you press START/STOP.
Activating functions using the The OPTION MENU appears just like the pop-up window that appears when you right-click the mouse on a computer. Various functions are displayed. Using the OPTION MENU 1 While using your camcorder, touch (OPTION) on the screen. (OPTION) Tab 2 Touch the desired item. If you cannot find the desired item, touch another tab to change the page. 3 Change the setting, then touch .
Recording items on the OPTION MENU * Items Page tab Viewing items on the OPTION MENU Items * Page tab SPOT MTR/FCS - 88 DELETE** a 48 SPOT METER - 88 DELETE by date** a 48 SPOT FOCUS - 88 DELETE ALL** a 48 TELE MACRO - 89 EXPOSURE - 89 tab FOCUS - 89 PROTECT** a 55 SCENE SELECTION - 90 PROTECT by date** a 55 WHITE BAL.
Functions set in the Items you can set only on the OPTION MENU will be described below. The default settings are marked with B. SPOT MTR/FCS You can adjust the exposure and focus for the selected subject simultaneously. This function enables you to use [SPOT METER] (p. 88) and [SPOT FOCUS] (p. 88) at the same time. OPTION MENU 1 Touch the point where you want to fix and adjust the exposure on the screen. appears. 2 Touch [END]. To return the setting to automatic exposure, touch [AUTO] t [END] in step 1.
TELE MACRO FOCUS This is useful to record small subjects, such as flowers or insects. You can blur out backgrounds and the subject stands out clearer. When you set [TELE MACRO] to [ON] ( ), the zoom (p. 38) moves to the top of the T (telephoto) side automatically and allows recording subjects at a close distance down to about 50 cm (19 3/4 in.). To cancel, touch [OFF], or zoom to wide angle (W side). b Notes EXPOSURE You can fix the brightness of an image manually.
Functions set in the OPTION MENU (Continued) PORTRAIT ( SCENE SELECTION You can record images effectively in various situations with the [SCENE SELECTION] function. ) Select this to bring out the subject such as people or flowers while creating a soft background. B AUTO Select this to automatically record images effectively without the [SCENE SELECTION] function. TWILIGHT* ( ) Select this to take night view without losing the mood.
WHITE BAL. (White balance) You can adjust the color balance to the brightness of the recording environment. B AUTO The white balance is adjusted automatically.
Functions set in the OPTION MENU (Continued) BLT-IN ZOOM MIC When you set [BLT-IN ZOOM MIC] to [ON] ( ), you can record sound with directivity as you move the power zoom lever. The default setting is [OFF]. MICREF LEVEL You can select the microphone level for recording sound. Select [LOW] when you want to record exciting and powerful sound in a concert hall, etc. B NORMAL Records various surround sounds, converting them into the certain level. LOW ( ) Records surround sound faithfully.
Performing with Your Computer What you can do with Windows computer When you install the “PMB” (Picture Motion Browser) on a Windows computer from the supplied CD-ROM, you can enjoy the following operations. x Importing images taken with your camcorder to a computer x Viewing imported images on a computer x Creating a DVD x Copying a disc t Video Disc Copier For details on the functions of “PMB,” see “PMB Guide” (p. 97).
What you can do with Windows computer (Continued) • If you use a Notebook PC, connect it to the AC Adaptor as the power source. Otherwise, the software will not work properly due to the power saving function of the PC. • You can read images recorded on “Memory Stick PRO Duo” media in a “Memory Stick” media slot of a computer.
4 Touch [ USB CONNECT] on the screen of your camcorder. 11Restart the computer if required to complete the installation. 7 Click [Continue]. 8 Read the terms of the license agreement carefully. If you agree to the terms, change to , then click [Next]. 9 Confirm the installation settings, b Notes • Even if a screen prompting you to restart your computer appears, you do not need to restart it at this time. Restart your computer after completing the installation.
What you can do with Windows computer (Continued) 6 Click [Import]. Importing of the selected movies starts. When importing is completed, “PMB” starts up automatically on the computer, and the imported movies are displayed in the window. Importing entire movies and still images to a computer (Easy PC Back-up) The [USB SELECT] screen appears on the camcorder screen. 3 Touch [ USB CONNECT]. The window for selecting movies to be imported is displayed.
Referring to “PMB Guide” Double-click the “PMB Guide” short-cut icon on the computer screen to open “PMB Guide.” 3 Click [Easy PC Back-up] in the [Handycam Utility] window. 4 Select the file format to be imported, and click [Import]. Movies and still images that have not been imported to a computer are automatically imported to your computer. z Tips • To import selected images, select [Media File Import] in step 3. Refer to “PMB Guide” for details on the operation (p. 97).
What you can do with Windows computer (Continued) 4 At the top of the window, click [Manipulate] - [DVD-Video (SD) Creation]. The window for selecting movies and still images appears. • To add movies and still images to the previously selected ones, select them in the main window and drag and drop onto the window for selecting movies and still images. Capturing still images from a movie You can save a frame of a movie as a still image.
To disconnect the USB cable 1 Click the icon on the task tray on the bottom right of the desk top. 2 Click [Safely remove USB Mass Storage Device]. 3 Touch [END] on the screen of your camcorder. your camcorder. 5 Disconnect the USB cable from the camcorder and the computer. b Notes • Do not disconnect the USB cable while the ACCESS/access lamp is lit. • Before turning off your camcorder, disconnect the USB cable following the proper procedures described above.
Troubleshooting Troubleshooting If you run into any problems using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. • Overall operations/Easy Handycam operation .....................................................................100 • Batteries/Power sources ..............................101 • LCD screen/Viewfinder...............................102 • Media ................................................
Even if you press EASY, menu settings do not switch to their defaults automatically. • Following menu settings remain as they were set even during Easy Handycam operation (p. 32). – [MOVIE MEDIA SET] – [PHOTO MEDIA SET]* – [AUDIO MODE]* – [WIDE SELECT] – [SUB-T DATE] – [ FACE SET] – [ IMAGE SIZE] – [FILE NO.] – [VOLUME] – [BEEP] – [TV TYPE] – [CLOCK SET] – [AREA SET] – [SUMMERTIME] – [ LANGUAGE SET] – [DEMO MODE] * DCR-DVD450E/DVD850E Your camcorder vibrates.
Troubleshooting (Continued) The battery pack is quickly discharged. • The ambient temperature is too high or low. This is not a malfunction. • The battery pack has not been charged enough. Fully charge the battery pack again. If the problem persists, replace the battery pack with a new one (p. 20). LCD screen/Viewfinder Menu items are grayed out. • You cannot select grayed items in the current recording/playback situation. • There are some functions you cannot activate simultaneously (p. 107).
You cannot delete images on the “Memory Stick PRO Duo” media. • The maximum number of images that you can delete on the INDEX screen at one time is 100. • You cannot delete protected images (p. 55). The data file name is not indicated correctly or flashes. • The file is corrupted. • The file format is not supported by your camcorder. Use the supported file format (p. 116). Recording You cannot record a still image. • You cannot record a still image on a disc on your camcorder.
Troubleshooting (Continued) The movie aspect ratio (16:9/4:3) cannot be changed. • You cannot change the movie aspect ratio in the following cases. – When [DISC] is selected on [MOVIE MEDIA SET], you inserted a DVD+RW, or no disc is inserted. – When [MEMORY STICK] is selected on [MOVIE MEDIA SET], no “Memory Stick PRO Duo” media is inserted. • You cannot adjust [LCD BL LEVEL] when: – The LCD panel is closed on your camcorder with the LCD screen facing out. – The power is supplied from the AC Adaptor.
“ ” is indicated on an image in the VISUAL INDEX screen. “ ” is indicated on an image in the DVD menu. • Loading of the data may have failed. It may be indicated correctly when you turn off the power and then turn it on again, or repeat removing and inserting the “Memory Stick PRO Duo” media a couple of times. • You removed the battery pack or the AC Adaptor while the access lamp is flashing. This operation may damage the image data, which will be marked with .
Troubleshooting (Continued) • When you create a disc using the supplied “PMB” software, select 2ch for the audio setting. • Record movies with [AUDIO MODE] set to [2ch STEREO] on your camcorder (p. 79). The movie is not played in the correct aspect ratio. • If movies in both 16:9 (wide) and 4:3 are dubbed on a DVD+RW, those movies may not be played in the correct aspect ratio depending on the playback device. This is not a malfunction.
– DVD-R – DVD+R DL • [UNFINALIZE] is not available during Easy Handycam operation (p. 32). You cannot edit or record additional images on a disc using other devices. • You may not be able to edit or record additional images on a disc recorded on your camcorder using other devices. Connecting/Dubbing to other devices You cannot hear the sound on the TV connected to your camcorder. • This is because only the S VIDEO plug is connected.
Warning indicators and messages Self-diagnosis display/Warning indicators If indicators appear on the LCD screen or in the viewfinder, check the following. Some symptoms you can fix by yourself. If the problem persists even after you have tried a couple of times, contact your Sony dealer or local authorized Sony service facility. C:04:00 E:20:ss / E:31:ss / E:61:ss / E:62:ss / E:91:ss / E:94:ss • A malfunction that you cannot service has occurred.
E (Battery level warning) Slow flashing • The battery pack is nearly used up. • Depending on the operating, environment, or battery conditions, E may flash, even if there are approximately 20 minutes remaining. (High temperature warning) Slow flashing • The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place. Fast flashing* • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.
Warning indicators and messages (Continued) Description of warning messages If messages appear on the screen, follow the instructions. x Media Internal memory format error. • The format of the internal memory of your camcorder has been changed from the default format. You may be able to use the internal memory again after formatting it (p. 71). All the data in the internal memory will be deleted. Playback prohibited. • You are trying to play back an incompatible disc with your camcorder.
The Image Database File is damaged. Do you want to create a new file? • The image database file is damaged. When you touch [YES], a new image database file is created. The old recorded images on the “Memory Stick PRO Duo” media cannot be played back (Image files are not damaged). If you perform [REPAIR IMG.DB F.] (p. 75) after creating new image database file, playing back the old recorded images may become possible. If it does not work, copy the image to a computer using the supplied software.
Additional Information Using your camcorder abroad Power supply System You can use your camcorder in any countries/regions using the AC Adaptor supplied with your camcorder within the AC 100 V to 240 V, 50 Hz/60 Hz range. On TV color systems Your camcorder is a PAL-system-based camcorder. If you want to view the playback image on a TV, it must be a PALsystem-based TV with an AUDIO/VIDEO input jack.
Setting to the local time You can easily set the clock to the local time by setting a time difference when using your camcorder abroad. Touch (HOME) t (SETTINGS) t [CLOCK/ LANG] t [AREA SET] and [SUMMERTIME] (p. 84). World time difference Time-zone differences Area setting Time-zone differences GMT Lisbon, London +11:00 Solomon Is.
File/folder structure on the internal memory (DCR-DVD450E/DVD850E) and “Memory Stick PRO Duo” media The file/folder structure is shown below. You do not usually need to acknowledge the file/ folder structure, when recording/playing back images on the camcorder. To enjoy still images or movies by connecting to a computer, see “PMB Guide” (p. 97) on the supplied CD-ROM, then use the supplied application.
Maintenance and precautions About the disc See page 12 for the details of discs which you can use with your camcorder. x Recording on the A side Place the disc in your camcorder with the side with the symbol at the center facing outwards until it clicks. symbol Notes on use • Hold the disc by its edge while supporting the center hole lightly. Do not touch the recording side (the opposite of the printed side when using a single-sided disc).
Maintenance and precautions (Continued) Care and storage of the discs • Keep the disc clean, or the image quality of the audio and video output may deteriorate. • Clean the disc with a soft cloth. Wipe the disc from the center out. For dirt, clean the disc with a soft cloth slightly moistened in water, then remove the moisture with a soft, dry cloth. Do not use solvents such as benzine, cleaners intended for vinyl LPs or antistatic spray, as they may cause a malfunction to the disc.
• Do not let the “Memory Stick PRO Duo” media get wet. • Keep the “Memory Stick PRO Duo” media out of the reach of small children. They might accidentally swallow it. • Do not insert anything other than “Memory Stick PRO Duo” media into the “Memory Stick Duo” media slot. Doing so may cause a malfunction.
Maintenance and precautions (Continued) What is an “InfoLITHIUM” battery pack? An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder and an optional AC Adaptor/ charger. The “InfoLITHIUM” battery pack calculates the power consumption according to the operating conditions of your camcorder, and displays the remaining battery time in minutes.
About handling of your camcorder On use and care x When not using your camcorder for a long time • Periodically turn it on and let it run such as by playing back or recording images for about 3 minutes. • Remove a disc from your camcorder. • Use up the battery pack completely before storing it. Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the disc, or on the pickup lens.
Maintenance and precautions (Continued) x How to prevent moisture condensation When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached the ambient temperature after about 1 hour. 3 Touch “×” displayed on the screen 3 times with the corner of “Memory Stick PRO Duo” media or the like. The position of “×” changes. Touch [CANCEL] to cancel.
On the pickup lens • Do not touch the pickup lens inside the disc cover. Keep the disc cover closed except when inserting and removing the disc, to keep dust out. • When your camcorder does not work because the pickup lens is dirty, clean it with a camera blower (sold separately). Do not touch the pickup lens directly during cleaning, because this may cause the camcorder to malfunction. Pickup lens About care and storage of the lens 4 Press the viewfinder onto the body of the camcorder.
Maintenance and precautions (Continued) On charging the pre-installed rechargeable battery Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the POWER switch is set to OFF (CHG). The preinstalled rechargeable battery is always charged while your camcorder is connected to the wall outlet (wall socket) via the AC Adaptor or while the battery pack is attached.
Specifications System Video compression format MPEG2/JPEG (Still images) Audio compression format DCR-DVD150E/DVD650E Dolby Digital 2ch Dolby Digital Stereo Creator DCR-DVD450E/DVD850E Dolby Digital 2ch/5.1ch Dolby Digital 5.1 Creator Video signal PAL color, CCIR standards Internal memory (DCR-DVD450E/ DVD850E) 16 GB When measuring media capacity, 1 GB equals 1 billion bytes, a portion of which is used for data management.
Specifications (Continued) General Power requirements DC 6.8 V/7.2 V (battery pack) DC 8.4 V (AC Adaptor) Average power consumption DCR-DVD150E/DVD650E Using the LCD screen (normal brightness): 2.4 W Using the Viewfinder: 2.2 W DCR-DVD450E/DVD850E Using the LCD screen (normal brightness): 2.1 W Using the Viewfinder: 1.9 W Operating temperature 0 °C to 40 °C (32 °F to 104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F) Dimensions (Approx.) 55 × 89 × 130 mm (2 1/4 × 3 5/8 × 5 1/8 in.
On trademarks Notes on the License • “Handycam” and are registered trademarks of Sony Corporation. • “Memory Stick,” , “Memory Stick Duo,” “ ,” “Memory Stick PRO Duo,” “ ,” “Memory Stick PRO-HG Duo,” “ ,” “Memory Stick Micro,” “MagicGate,” “ ,” “MagicGate Memory Stick” and “MagicGate Memory Stick Duo” are trademarks or registered trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation. • DVD-RW, DVD+RW, DVD-R, and DVD+R DL logo are trademarks.
Quick Reference Identifying parts and controls The numbers in ( ) are reference pages. DCR-DVD150E/ DVD650E A Speaker (34, 42) Playback sounds come out from the speaker. For how to adjust the volume, see page 42. B “Memory Stick Duo” media slot/cover and access lamp (30) The access lamp lights for both the internal memory* and “Memory Stick PRO Duo” media. C RESET button Initializes all the settings, including the setting of the date and time.
A POWER switch (23) B Viewfinder (25) C CHG (charge) lamp (20) D (Movie)/ (Still) mode lamps (23) E Battery pack (20) F Built-in microphone (38) G Power zoom lever (38, 43) H PHOTO button (32, 37) I DC IN jack (20) Quick Reference J START/STOP button (32, 37) K Tripod receptacle Attach the tripod (sold separately: the length of the screw must be less than 5.5 mm (7/32 in.)) to the tripod receptacle using a tripod screw.
Identifying parts and controls (Continued) A Disc cover (28) B Hook for a shoulder belt Attach a shoulder belt (sold separately). C Grip belt (25) D Disc cover OPEN switch and ACCESS lamp (28) E Lens (Carl Zeiss Lens) (7) F LENS COVER switch (25) G A/V Remote Connector (45, 62) Connect other optional accessories.
Indicators displayed during recording/playback Recording movies A HOME button (17, 77) B Remaining battery (approx.
Indicators displayed during recording/playback (Continued) Indicator Screen indicators n Upper left Upper right Meaning White balance (91) SteadyShot off (80) Tele macro (89) - Protect (55) SPOT MTR/FCS (88)/ SPOT METER (88)/ EXPOSURE (89) Bottom Center Upper left Indicator Meaning Audio mode (79) MICREF LEVEL low (92) WIDE SELECT (79) Self-timer recording (92) BLT-IN ZOOM MIC (92) Upper right Indicator Meaning Fader (91) Center Indicator Meaning E Warning (108) Bottom Indicator Meanin
Glossary x 5.1ch surround sound x VIDEO mode A system that plays back sound on 6 speakers, 3 at the front (left, right and center) and 2 at the rear (right and left) with an additional low-pass subwoofer counted as a 0.1 channel for frequencies of 120 Hz or lower. One of the recording formats you can select when using a DVD-RW. VIDEO mode provides excellent compatibility with other DVD devices. x Dolby Digital One of the recording formats you can select when using a DVD-RW.
Index Numeric Connecting TV................................. 45 16:9.......................................45 VCR or DVD/HDD recorders ....................... 62 FADER......................... 91, 107 Copying still images ............ 53 Film Roll Index ....................42 16:9 WIDE ...........................29 21-pin adaptor.......................46 4:3...................................29, 45 5.1ch surround recording......38 5.1ch surround sound ...........38 8cm DVD ...........................
L OUTPUT SETTINGS .......... 84 LANDSCAPE.......................90 P SOUND/DISP SET ..............83 PAL .................................... 112 SP..........................................79 PHOTO COPY..................... 53 Specifications .....................123 LCD BL LEVEL (LCD back light level).....................83, 104 PHOTO SETTINGS ............ 81 SPORTS (Sports lesson).......90 Playback ......................... 33, 40 SPOT FOCUS ..............88, 107 LCD BRIGHT .................
Index (Continued) WHITE BAL. (White balance) ..............................................91 WHITE FADER ...................91 WIDE SELECT....................79 Windows...............................93 World time difference ........113 Z Zoom ....................................