3-862-747-11(1) Multi-Effect Processor Mode d’emploi GB GB F Bedienungsanleitung D Operating Instructions DPS-V55M © 1998 by Sony Corporation
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. WARNING To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. This plug cannot be used and should be destroyed. Voor de klanten in Nederland Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. VARNING Explosionsfara vid felaktigt batteribyte.
Welcome! Thank you for purchasing the Sony MultiEffect Processor. Before operating the unit, please read this manual thoroughly and retain it for future reference.
Getting Started Main Features The DPS-V55M is a four channels multi–effect processor. Four channel construction The DPS-V55M is outfitted with four inputs (and outputs) and can route the input signals in a variety of different ways depending on the chosen effect algorithms and program structures. Flexible effect algorithms and program structures The DPS-V55M incorporates a total of 45 different effect algorithms divided into three different types: 4ch, 2ch (stereo), and Mono-Pair.
Functional Hierarchy Program number PLAY EDIT Effect On/Off FxA On/Off FxB On/Off FxTYPE FxA Parameter 1 * * * Parameter n FxB Parameter 1 * * * Parameter n Master Level Master Level (0 ~ 100) Fx Type Effect A Type Number Structure Type Effect B Type Number Search Effect Type Number Program Number Execute (push ENTER) SAVE Program Number Program Name Execute TAP Tap Function BYPASS Bypass or Muting SYSTEM MIDI Channel (1 ~ 16) Omni Mode (On/Off) Out/Thru (Out/Thru) Program Change Tabl
Getting Started Names and Functions of Parts Front panel 1 2 10 3 11 1 U (Power switch) Press this switch to turn the power on and off. Turning on the power on recalls the last used memorized effect and activates play mode automatically. 2 Effect algorithm list Numbers and names of the 45 available effect algorithms. 01~09 are 4ch algorithms, 10~36 are 2ch algorithms, and 37~45 are Mono-Pair algorithms. (See “Understanding Effect Algorithms and Program Structures” on page 8 for details).
Names and Functions of Parts Rear panel 1 2 3 4 1 LCD CONTRAST knob Use to adjust the contrast of the display on the front panel. 2 MIDI OUT/THRU terminal For sending and/or relaying MIDI command signals from the processor to other components. To switch between OUT and THRU, see pages 17~18. 3 MIDI IN terminal Input for MIDI command signals. Use a commercially available MIDI cable to connect this terminal to another component's MIDI OUT (or THRU) terminal.
Getting Started Understanding Effect Algorithms and Program Structures Effect algorithms Program structures This unit contains three types of effect algorithms: 4ch, 2ch, and Mono-Pair. Each program can contain up two effects (FxA and FxB) depending on the type of effect selected. If a 2ch or Mono-Pair effects are selected, the program contains two effects (one, or both can be turned off if necessary).
Hooking Up • Before connecting this unit to another device, be sure to unplug the AC power cord from the power outlet. • Turn off the power switch on this unit and all components to be connected, such as keyboards and active speakers (speakers with built in amplifiers). • After all the connections, double check that the connections are correct before plugging the AC power cord back into the power outlet.
Basic Operations Level indicators U Display Rotary encoder INPUT LEVEL (1~4) Choosing a Program 3 The processor comes with 200 different preset programs (numbers 001~200) as well as room for 200 user programs for storing the programs you create (numbers 201~400). Use the following procedure to choose the program you desire. 1 Turn the rotary encoder to select a program (001~400). The program numbers (and corresponding names) appear in the display as you turn the jog dial.
Outputting Without Effects (BYPASS) Reading the Display During play mode the display provides various information about the selected program 001 Super Reverb FxA:11/ FxB:12 1 2 3 45 6 The bypass function allows you to output the original signal without adding any effects. This function can also be set to completely cut (mute) the sound output from the processor (see page 18 if you want to switch to muting). Press BYPASS to activate the bypass (mute) function.
Basic Operations Selecting Programs by Effect Block This function lets you search for programs based on the type of effects they contain. In addition to being a good way to explore different implementations of the same effect, it is also a quick way locate a specific program. Effect algorithms Display FxTYPE (SEARCH) EDIT PARAMETER ? / 1 Press Fx TYPE (SEARCH) twice to display the search screen.
Editing a Program Choosing the Effects Use the following operations to choose the effect(s) to be used in your program. You can choose up to two effect blocks (when using 2ch (10~36) or Mono-Pair (37~45) effects). When using a 4ch effect (01~09), you may choose only one effect. (See page 8 for details). Effect algorithms Display FxTYPE (SEARCH) EDIT PARAMETER ? / 1 Press Fx TYPE (SEARCH) to display the type screen. 4 EXIT Turn the rotary encoder to select an effect (10~45) for FxB.
Editing a Program Choosing the Structure This function lets you choose the structure of the effect blocks. Note, this setting is only possible when you have selected effects for both FxA and FxB. (It is not possible when using 4ch effects). 1 Press Fx TYPE to display the effect type screen. Changing the Parameters Use the following procedures to: • Turn an effect on or off, • Adjust individual effect parameters (FxA or FxB) • Adjust the master volume (output) of the program.
Using the TAP function This function lets you change the value of certain time related parameters or trigger an effect by tapping on the ENTER (TAP) button. The parameter which responds to the TAP function is different for each effect, and not all effect have compatible parameters. However, many time related parameters (such as Delay Time) or parameters activated by a trigger (such as Key Trigger) are designed to work with the TAP function.
Editing a Program Saving your Program New programs created by changing effect blocks, effect structures, and effect parameters can be stored in memory for later use. You can store up to 200 different user programs using program numbers 201~400. SAVE Display EDIT PARAMETER ? / 1 Press SAVE to activate the save mode. 4 The program number starts blinking. (A previously saved program name appears in the display.) Save: 201 Super Reverb 2 5 Press EDIT PARAMETER / to move the cursor to the program name.
System Operations The system settings allow you customize this unit’s operating environment. You can specify how the unit will respond to MIDI commands and how the BYPASS and TAP functions will operate. Display SYSTEM EDIT PARAMETER ? / You can use the MIDI interface to control various aspects of this unit. For example, you can switch between memorized effects by using the program table, or save your custom effects to and external storage device.
System Operations Setting the MIDI Program Table 1 Use the rotary encoder to specify the MIDI program change number. System:MIDI Tabl M I D I # 0 0 1n P r g # 0 0 1 2 Press EDIT PARAMETER /. 3 Use the rotary encoder to specify the program to be switched to. System:MIDI Tabl M I D I # 0 0 6 nP r g # 0 0 6 Other Settings The system set up parameters let you to select how the BYPASS button and TAP function parameters will operate.
Additional Information Restoring the Original Factory Settings You can restore the entire user memory and all system settings to the original factory conditions. 1 Turn off the power. 2 Hold down SAVE and SYSTEM, and turn the power back on. “All Initialize!!” appears in the display and the unit is reset to the original factory settings. Note All user memory data is rewritten by the original factory data.
Additional Information Precautions On safety • Should any liquid or solid object fall into the unit, unplug the unit and have the unit checked by qualified personnel before operating it any further. On power sources • Before operating the unit, be sure that the operating voltage of your unit is identical with that of your local power supply. • Unplug the unit from the wall outlet if it is not to be used for an extended period of time. To disconnect the cord, pull it out by grasping the plug.
GB
AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, éviter d’exposer l’appareil à la pluie ou à l’humidité.
Bienvenue Nous vous remercions d’avoir choisi ce Processeur Multi-effets Sony. Avant d’utiliser cet appareil, veuillez lire attentivement ce manuel que vous conserverez pour toute référence ultérieure.
Informations préliminaires Caractéristiques principales Le DPS-V55M est un processeur multi-effets quatre canaux. Construction à quatre canaux Le DPS-V55M est doté de quatre entrées (et sorties) et peut diriger les signaux d’entrée de différentes façons selon les algorithmes d’effet et les structures de programme choisis. Comment utiliser ce manuel Ce mode d’emploi décrit l’installation et les démarches d’utilisation du processeur multi-effets DPS-V55M.
Hiérarchie Fonctionnelle Program number PLAY EDIT Effect On/Off FxA On/Off FxB On/Off FxTYPE FxA Parameter 1 * * * Parameter n FxB Parameter 1 * * * Parameter n Master Level Master Level (0 ~ 100) Fx Type Effect A Type Number Structure Type Effect B Type Number Search Effect Type Number Program Number Execute (push ENTER) SAVE Program Number Program Name Execute TAP Tap Function BYPASS Bypass or Muting SYSTEM MIDI Channel (1 ~ 16) Omni Mode (On/Off) Out/Thru (Out/Thru) Program Change
Informations préliminaires Appellation et fonctions des organes Panneau avant 1 2 10 3 11 1 Interrupteur d’alimentation (U) Cet interrupteur met l’appareil sous et hors tension. A la mise sous tension, le dernier effet mémorisé qui a été utilisé est rappelé et le mode de lecture est automatiquement activé. 2 Liste des algorithmes d’effet Numéros et noms des 45 algorithmes d’effet proposés.
Appellation et fonctions des organes Panneau arrière 1 2 3 4 1 Bouton de réglage du contraste de l’afficheur (LCD CONTRAST) Pour ajuster le contraste de l’afficheur sur le panneau avant. 2 Borne de sortie/boucle MIDI (MIDI OUT/ THRU) Pour transmettre et/ou relayer des signaux de commande MIDI fournis à d’autres appareils par le processeur. Pour permuter entre OUT et THRU, Cf. pages 17 et 18. 3 Borne d’entrée MIDI (MIDI IN) Entrée des signaux de commande MIDI.
Informations préliminaires Fonctionnement des algorithmes d’effet et des structures de programme Algorithmes d’effet Structures des programmes Cet appareil contient trois types d’algorithmes d’effet: 4 canaux (4ch), 2 canaux (2ch) et mono (Mono-Pair). Chaque programme contient jusqu’à deux effets (FxA et FxB) selon le type d’effet sélectionné. Si des effets 2ch ou Mono-Pair sont sélectionnés, le programme contiendra deux effets (il est possible de désactiver un effet ou les deux, si nécessaire).
Connexions fondamentales • Avant de raccorder cet appareil à un autre dispositif, prenez soin de débrancher le cordon d’alimentation secteur au niveau de la prise secteur. • Coupez l’alimentation de cet appareil et de tous les composants à raccorder, tels que claviers et enceintes actives (enceintes amplifiées). • Une fois qu’elles sont terminées, vérifiez à nouveau toutes les connexions avant de rebrancher le cordon d’alimentation sur la prise du secteur.
Opérations de base Témoins de niveau U Afficheur Bague d’exploitation INPUT LEVEL (1~4) Sélection d’un programme 3 Le processeur dispose de 200 programmes préréglés (numéros 001 à 200) et permet de stocker jusqu’à 200 programmes créés par l’utilisateur (numéros 201 à 400). Procédez de la façon suivante pour choisir le programme souhaité. 1 Tournez la bague d’exploitation pour sélectionner le programme (001 à 400).
Sortie sans effets (BYPASS) Légende de l’affichage En mode de lecture, l’afficheur indique différentes informations à propos des programmes sélectionnés. 001 Super Reverb FxA:11/ FxB:12 1 2 3 45 6 1 Numéro et nom de programme: Le numéro (001 à 400) et le nom du programme actuel. 2 Symbole FxA activé/désactivé: “•”: FxA activé (sur l’illustration, FxA est activé) (vide): FxA est désactivé 3 Numéro d’effet FxA: Numéro (01 à 45) de l’effet affecté au bloc FxA du programme actuel.
Opérations de base Sélection de programmes par bloc d’effets Cette fonction sert à rechercher des programmes en fonction du type d’effets qu’ils contiennent. Elle permet non seulement d’explorer les différentes implémentations d’un même effet mais aussi de localiser rapidement un programme particulier. Algorithmes d’effet Afficheur FxTYPE (SEARCH) EDIT PARAMETER ? / 1 Appuyez deux fois sur Fx TYPE (SEARCH) pour afficher l’écran de recherche.
Edition d’un programme Sélection des effets Effectuez les opérations suivantes pour choisir le ou les effets qui seront utilisés dans votre programme. Vous pouvez choisir deux blocs d’effets au maximum (lorsque les effets 2ch (10-36) ou Mono-Pair (37-45) sont utilisés). Lorsqu’un effet 4ch (0109) est utilisé, un seul effet peut être sélectionné. (Reportez - vous à la page 8 pour les détails.
Edition d’un programme Sélection de la structure Cette fonction permet de choisir la structure des blocs d’effets. Ce réglage n’est possible que si vous avez sélectionné des effets pour FxA et FxB (il est impossible si des effets 4ch sont utilisés). 1 Appuyez sur Fx TYPE pour afficher l’écran de type d’effet.
Utilisation de la fonction TAP Cette fonction permet de changer la valeur de certains paramètres liés au tempo ou à activer un effet par une simple frappe de la touche ENTER (TAP). Le paramètre qui répond à la fonction TAP est différent pour chaque effet, et tous les effets n’ont pas des paramètres compatibles. Toutefois, de nombreux paramètres liés au temps (temps de retard, etc.) ou les paramètres activés par un déclencheur (déclencheur à touche) sont conçus pour être utilisés avec la fonction TAP.
Edition d’un programme Sauvegarde d’un programme Les nouveaux programmes obtenus après le changement des blocs de paramètres, les structures d’effet et les paramètres d’effet peuvent être sauvegardés pour être utilisés ultérieurement. Un total de 200 programmes Utilisateur peuvent ainsi être sauvegardés sous les numéros de programme 201 à 400. Afficheur SAVE Bague d’exploitation EDIT PARAMETER ? / 1 Appuyez sur SAVE pour activer le mode de sauvegarde. 5 Le numéro de programme se met à clignoter.
Réglages de l’environnement du système Les réglages Système permettent à l’utilisateur de personnaliser l’environnement d’exploitation de l’appareil. Vous pouvez définir la manière dont il répondra aux commandes MIDI et la manière dont les fonctions BYPASS et TAP opéreront. Afficheur SYSTEM EDIT PARAMETER ? / Vous pouvez utiliser l’interface MIDI pour contrôler différentes caractéristiques de l’appareil.
Réglages de l’environnement du système Réglage de la table de programmes MIDI 1 Servez-vous de la bague d’exploitation pour définir le numéro de changement de programme MIDI. System:MIDI Tabl M I D I # 0 0 1n P r g # 0 0 1 2 Appuyez sur EDIT PARAMETER /. 3 Servez-vous de la bague d’exploitation pour définir le programme à activer.
Informations complémentaires Rétablissement des réglages d’usine Il est possible de ramener toute la mémoire Utilisateur et tous les réglages du système aux valeurs originales, définies en usine. 1 Mettez l’appareil hors tension. 2 Tout en appuyant sur SAVE et ENTER, remettez l’appareil sous tension. Le message “All Initialize!!” apparaît sur l’afficheur et l’appareil revient à ses réglages d’origine. Remarque Toutes les données de la mémoire Utilisateur sont remplacées par les données d’usine.
Informations complémentaires Précautions Sécurité • Si un liquide ou un solide quelconque pénètre à l’intérieur de l’appareil, débranchez le cordon secteur et faites vérifier l’appareil par un personnel qualifié avant de le remettre en service.
21F
WARNUNG Um Feuergefahr und die Gefahr eines elektrischen Schlags zu vermeiden, setzen Sie das Gerät weder Regen noch sonstiger Feuchtigkeit aus.
Herzlichen Glückwunsch! Wir beglückwünschen Sie zum Kauf dieses Sony Multieffektprozessors. Vor der Inbetriebnahme lesen Sie die Anleitung sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen gut auf.
Vorbemerkungen Die Hauptmerkmale Der Multieffektprozessor DPS-V55M zeichnet sich durch folgende Merkmale aus: Vier Kanäle Der DPS-V55M besitzt vier Eingänge (und Ausgänge). Je nach den gewählten Effektalgorithmen und Programmstrukturen werden die Eingangssignale auf verschiedene Arten weitergeleitet. Vielseitige Effektalgorithmen und Programmstrukturen Der DPS-V55M besitzt 45 verschiedene Effektalgorithmen, die in die folgenden drei Typen unterteilt sind: 4ch, 2ch (Stereo) und Mono-Paar.
Funktionshierarchie Program number PLAY EDIT Effect On/Off FxA On/Off FxB On/Off FxTYPE FxA Parameter 1 * * * Parameter n FxB Parameter 1 * * * Parameter n Master Level Master Level (0 ~ 100) Fx Type Effect A Type Number Structure Type Effect B Type Number Search Effect Type Number Program Number Execute (push ENTER) SAVE Program Number Program Name Execute TAP Tap Function BYPASS Bypass or Muting SYSTEM MIDI Channel (1 ~ 16) Omni Mode (On/Off) Out/Thru (Out/Thru) Program Change Table
Vorbemerkungen Bezeichnung der Bedienungselemente Vorderseite 1 2 10 3 11 1 Netzschalter (U) Zum Ein- und Ausschalten des Geräts. Beim Einschalten wird zunächst der letzte Effekt aus dem Speicher zurückgerufen und auf Wiedergabe geschaltet. 2 Effektalgorithmusliste Enthält die Nummern und Namen der verfügbaren 45 Effektalgorithmen. Bei 01 bis 09 handelt es sich um Vier-Kanal-Algorithmen, bei 10 bis 36 um Zwei-KanalAlgorithmen und bei 37 bis 45 um Mono-PaarAlgorithmen.
Bezeichnung der Bedienungselemente Rückseite 1 2 3 4 1 LCD CONTRAST-Regler Mit diesem Regler kann der Kontrast des Displays an der Vorderseite variiert werden. 2 MIDI OUT/THRU-Buchse Über diese Buchse werden MIDI-Steuersignale vom Prozessor zu anderen Geräten ausgegeben und/oder durchgeschleift. Zum Umschalten zwischen AusgabeModus (OUT) und Durchschleif-Modus (THRU) siehe Seite 17 und 18. 3 MIDI IN-Buchse Zur Zuleitung von MIDI-Steuersignalen.
Vorbemerkungen Die Effektalgorithmen und Programmstrukturen Effektalgorithmen Programmstrukturen Dieses Gerät besitzt die folgenden drei Typen von Effektalgorithmen: 4ch, 2ch und Mono-Paar. Jedes Programm kann je nach dem gewählten Effekttyp aus bis zu zwei Effekten (FxA und FxB) bestehen. Wenn ein 2choder Mono-Paar-Effekt gewählt ist, enthält das Programm zwei Effekte (falls erforderlich, können Sie einen oder beide Effekte abschalten).
Anschluß • Bevor Sie dieses Gerät mit einem anderen Gerät zusammenschalten, trennen Sie das Netzkabel von der Wandsteckdose ab. • Schalten Sie dieses Gerät und alle anderen Komponenten (wie Keyboard, Aktiv-Lautsprecher usw.) aus, bevor Sie Anschlüsse vornehmen. • Überprüfen Sie den Anschluß nochmals, bevor Sie das Netzkabel an die Wandsteckdose anschließen.
Grundlegender Betrieb Pegelanzeigen U Display Einstellscheibe INPUT LEVEL (1~4) Wahl eines Programms 3 Neben 200 Festprogrammen (mit den Nummern 001 bis 200) besitzt der Prozessor Speicherplätze für 200 von Ihnen selbst erstellte Benutzerprogramme (mit den Nummern 201 bis 400). Zur Wahl eines Programms führen Sie die folgenden Schritte aus. 1 Vor dem Einschalten der externen Geräte Reduzieren Sie die Lautstärke, um eine plötzliche Ausgabe von sehr hochpegeligen Signalen zu vermeiden.
Anzeigen im Display Ausgabe ohne Effekte (BYPASS) Im Wiedergabemodus zeigt das Display verschiedene Informationen zum gewählten Programm an. 001 Super Reverb FxA:11/ FxB:12 1 2 3 45 6 1 Programmummer und -name Die Nummer (001 bis 400) und der Name des momentanen Programms wird angezeigt. 2 Ein/Aus-Symbol für FxA „•“: FxA eingeschaltet (im oben dargestellten Beispiel ist FxA eingeschaltet). Leer: FxA ausgeschaltet.
Grundlegender Betrieb Programmwahl durch Vorgabe des Effekttyps Bei der Wahl eines Programms können Sie einen bestimmten Effekttyp vorgeben. Diese Funktion hilft Ihnen dabei, sich einen Überblick über die unterschiedlichen Wirkungen eines bestimmten Effektes zu verschaffen und ermöglicht darüber hinaus ein schnelles Auffinden eines bestimmten Programms. Effektalgorithmus Display FxTYPE (SEARCH) EDIT PARAMETER ? / 1 Drücken Sie Fx TYPE (SEARCH) zweimal, um das Suchmenü anzuzeigen.
Editieren eines Programms Wahl eines Effektes Mit dem folgenden Verfahren können Sie die Effekte, die in Ihrem Programm verwendet werden sollen, wählen. Bei den 2chEffekten (10 bis 36) und den Mono-Paar-Effekten (37 bis 45) stehen ein oder zwei Effektblöcke zur Auswahl. Bei den 4chEffekten (01 bis 09) steht nur ein Effektblock zur Auswahl. (Einzelheiten siehe Seite 8.) Effektalgorithmus Display FxTYPE (SEARCH) EDIT PARAMETER ? / 1 Drücken Sie Fx TYPE (SEARCH), um das Typenmenü anzuzeigen.
Editieren eines Programms Wahl der Struktur Durch das folgende Verfahren können Sie die Struktur der Effektblöcke einstellen. Beachten Sie, daß dies nur möglich ist, wenn sowohl für FxA als auch für FxB Effekte gewählt worden sind. (Bei 4ch-Effekten ist diese Einstellung nicht möglich.) 1 Drücken Sie Fx TYPE, um das Effekttypmenü anzuzeigen.
Verwendung der TAP-Funktion Mit der TAP-Funktion können Sie durch einfaches Antippen der ENTER (TAP)-Taste bestimmte Zeitparameter ändern oder einen Effekt auslösen. Die Parameter, die sich auf diese Weise ändern lassen, sind von Effekt zu Effekt verschieden. Beachten Sie auch, daß bei einigen Effekten keine Parameteränderung mit der TAP-Funktion möglich ist.
Editieren eines Programms Sichern eines Programms Auf den Speicherplätzen 201 bis 400 können Sie insgesamt 200 Programme, die Sie selbst durch Ändern der Effektblöcke, Effektstrukturen und Effektparameter erstellt haben, abspeichern. SAVE Display EDIT PARAMETER ? / 1 Drücken Sie SAVE, um den Sicherungsmodus zu aktivieren. 5 Die Programmnummer beginnt zu blinken. (Der Name des zuvor gesicherten Programms wird angezeigt.
Systemeinstellungen Durch die folgenden Systemeinstellungen können Sie das Gerät an die jeweiligen Anforderungen anpassen. So läßt sich beispielsweise die Reaktion des Geräts auf MIDI-Befehle und die Arbeitsweise der BYPASS- und TAP-Funktionen festlegen. Display SYSTEM EDIT PARAMETER ? / Über das MIDI-Interface können verschiedene Funktionen gesteuert werden.
Systemeinstellungen Einstellen der MIDI-Programmtabelle 1 Wählen Sie mit der Einstellscheibe die MIDIProgrammänderungsnummer. System:MIDI Tabl M I D I # 0 0 1n P r g # 0 0 1 2 Drücken Sie EDIT PARAMETER /. 3 Wählen Sie mit der Einstellscheibe das Programm, auf das umgeschaltet werden soll. System:MIDI Tabl M I D I # 0 0 6 nP r g # 0 0 6 Sonstige Einstellungen Mit den System Setup-Parametern können die Funktionen BYPASS und TAP eingestellt werden.
Zusatzinformationen Zurücksetzen auf die werksseitigen Ausgangseinstellungen Durch den folgenden Vorgang werden alle Benutzerspeicher und Systemeinstellungen auf die werksseitigen Ausgangszustände zurückgesetzt. 1 Schalten Sie das Gerät aus. 2 Während Sie SAVE und SYSTEM gedrückt halten, schalten Sie das Gerät wieder ein. „All Initialize!!“ erscheint im Display, und alle Einstellungen werden in die werksseitigen Ausgangszustände zurückgesetzt.
Zusatzinformationen Zur besonderen Beachtung Sicherheit • Sollte ein fester Gegenstand oder Flüssigkeit in das Gerät gelangen, trennen Sie es ab und lassen Sie es von einem Fachmann überprüfen, bevor Sie es weiterverwenden. Stromversorgung • Vor dem Betrieb des Geräts vergewissern Sie sich, daß die Betriebsspannung mit der örtlichen Netzspannung übereinstimmt. • Trennen Sie das Gerät bei längerer Nichtverwendung von der Wandsteckdose ab.
21D
22D
Sony Multi Effect Processor DPS-V55M MIDI Implementation Chart / Charte d’implémentation MIDI / MIDI-Implementationstabelle Transmitted Function... Mar 01, 1998 Version: 1.
Blank Chart / Tableaux d’espace / Leertabellen Program Number: Program Name: Fx Type: FxB: FxA: Fx Structure: Parallel(/) / Serial (m) Master Level: FxB FxA Parameter Name Parameter Name Value 1 1 2 2 3 3 4 5 4 6 6 7 7 8 8 Value 5 Comments: Program Number: Program Name: Fx Type: FxB: FxA: Fx Structure: Parallel(/) / Serial (m) Master Level: FxB FxA Parameter Name Parameter Name Value 1 1 2 2 3 3 4 4 5 6 5 7 7 8 8 6 Comments: 2GBSony Corporation Printed in