3-280-325-52 (1) Wireless Stereo Headset Operating Instructions US Manual de instrucciones ES DR-BT21iK © 2007 Sony Corporation
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
For the customers in the USA RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Compatible iPod models The compatible iPod models are as follows. Update your iPod to use the latest software before you use it.
US
Table of Contents What is Bluetooth wireless technology?............................ 6 Features...................................... 7 Getting Started Checking supplied items......... 8 Location and Function of Parts.......................................... 9 Bluetooth headset.......................... 9 Bluetooth transmitter.................10 Basic use of headset...............11 Charging the headset.................11 Folding.............................................14 Unfolding...................
What is Bluetooth wireless technology? BluetoothTM wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Features This product is an audio kit comprising of a transmitter and headset using Bluetooth wireless technology. You can enjoy music wirelessly by transmitting the audio signals to a headset by connecting the Bluetooth transmitter to iPod (see page 3 for compatible iPod models) with the iPod connector* (30 pin). * iPod connector is a dedicated multiple connector for connecting accessories to your iPod.
Getting Started Checking supplied items Bluetooth headset DR-BT21G (1) Bluetooth transmitter TMR-BT8iP (1) AC power adaptor (1) Operating Instructions (this book) (1) Warranty Card (1) US
Location and Function of Parts Bluetooth headset Headset indicator (blue) Indicates the communication status of the headset. Headset indicator (red) Indicates the power status of the headset. Multi function button Controls various functions when calling with a headset by combining with a Bluetooth mobile phone. Press the button on the tactile dots. Jog switch Controls various functions when listening to music with a headset.
Bluetooth transmitter iPod connector (30 pin) Connects to the dock connector of an iPod (page 16). Transmitter indicator Indicates the transmitter’s status (page 23). Power button Performs the following: • Turning on/off of the transmitter (page 16). • Pairing (page 21). • Initializing the transmitter (page 38). Hereafter, “Bluetooth headset” is abbreviated as “headset,” and “Bluetooth transmitter” as “transmitter.
Basic use of headset Charging the headset The headset contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied AC power adaptor to the DC IN 3 V jack on the headset. Bluetooth headset To DC IN 3 V jack To an AC outlet AC power adaptor (supplied) When the AC power adaptor is connected to an AC outlet, charging starts.
Caution If the headset detects a problem while charging, the headset indicator (red) may turn off, although charging is not complete. Check for the following causes: – Ambient temperature exceeds the range of 0 °C – 40 °C (32 °F – 104 °F). – There is a problem with the battery. In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer.
Checking the remaining battery When pressing the POWER button while the headset is turned on, the headset indicator (red) flashes. You can check the remaining battery by the number of times the headset indicator (red) flashes. Headset Indicator (red) Status 3 times Full 2 times Mid 1 time Low (needs to charge) Note You cannot check the remaining battery immediately after the headset is turned on, or while pairing.
Folding 1 Hold near the foldable part with both hands and lift up the left housing to fold it as illustrated. Unfolding 1 Unfold the left and right neckband as illustrated. Fold the right housing in the same manner. 2 2 Lift up and open up the remaining half of the neckband. Close the folded left and right neckband. Notes Do not pull open this way. Be careful not to hit your face or eyes with the top of the neckband.
Wearing 1 2 3 Place the neckband on the neck. The headset with the POWER button is the right housing (for the right ear). Lift up the headset slightly above the ear level, put down the neckband so that it hooks on your ears and put the ear pads on your ears. Adjust the angle and position of the neckband so that the headset is fitted comfortably on your ears.
Connecting to an iPod Connect the transmitter to the dock connector port of an iPod (see page 3 for compatible iPod models) firmly. Dock connector port (30 pin) Power button To turn on the transmitter 1 2 Connect the transmitter to the iPod. Press the power button of the transmitter for about 1 second to turn it on, or start to play back on iPod. When the transmitter turns on, the indicator flashes twice. Note If the transmitter cannot turn on, operate the iPod.
Notes To listen to music from the headphone jack of the iPod, disconnect the transmitter from the iPod. While the transmitter is turned on, it consumes power from the iPod. We recommend disconnect the transmitter from iPod when not using the Bluetooth function. If the headphone is connected to the iPod while the iPod is playing back, it consumes power from iPod. If you turn off the transmitter while the iPod is playing back, iPod will power off.
Operating Listening to music of the iPod You can listen to music of the iPod (see page 3 for compatible iPod models) on the headset. 1 2 Press and hold the POWER button on the headset for about 3 seconds. The headset indicator (blue) and headset indicator (red) flash together twice and the headset is turned on. Connect the transmitter to the iPod then turn on the iPod and start playback on the iPod.
Tip You can control the volume on the headset. (The volume of the iPod is not changed.) You can also fast-forward or fast-rewind while playing back (page 20). Notes Even if you control the volume on the iPod, sound from the headset will not change. If the transmitter and the headset become out of range and the Bluetooth connection terminates, repeat the procedure from step 1.
Controlling an iPod with the headset You can control an iPod (see page 3 for compatible iPod models) using the control button of the headset. Before starting remote control operation, check that step 1 and 2 of “Listening to music of the iPod” are completed (page 18). Transmitter Control for the iPod Remote control Bluetooth headset (playback, pause, etc.) You can playback or pause the iPod by pressing the button on the headset.
Advanced operation Pairing with other Bluetooth devices What is pairing? Bluetooth devices need to be “paired” with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: Pairing information is deleted after repair, etc. This product is paired with 9 or more receiving devices. This product can be paired with up to 8 Bluetooth device respectively.
5 Press and hold the power button of the transmitter for about 7 seconds or more to enter “Pairing in process.” After about 1 second, the transmitter indicator will flash twice, but keep pressing the power button. Notes When first power on the transmitter after initialized, the transmitter will enter “Pairing in process” automatically. The pairing information is initialized if you press and hold the power button for 15 seconds.
To quit “Pairing in process” Press and hold the power button of the transmitter for about 1 second to turn off the transmitter. Tip When pairing the transmitter with a number of Bluetooth receiving devices, repeat steps 3 to 5 for each device individually. Note For using the Bluetooth function, it is required that the Bluetooth device on the other side is corresponding with the same profile as the transmitter.
*1 When press on the iPod, the music pause. The indicator flashes twice on the transmitter. The transmitter transmits the data of no sound. *2 When press the pause button on the Bluetooth receiving device, the music pause. The indicator flashes once on the transmitter. The transmitter does not transmit the music. Pairing headset with other Bluetooth transmitting devices 1 2 3 Place the Bluetooth transmitting device to be paired together within 1 m (3 ft) of the headset.
The headset indicator flashes quickly: Pairing in process The headset indicator flashes (at about 1-second intervals) when responding to the Bluetooth transmitting device: Connectable (Pairing successful) The headset indicator flashes (at about 5-second intervals): Connected Note Passcode* of the headset is fixed at “0000.” Depending on the Bluetooth receiving device, it may be necessary to input the passcode (in this case, “0000”).
On Headset Indicators Connected Connecting Pairing Status Searching Music Phone US Indicator B R – – – – – – – – – – – – – – –… –… Connectable B – – R– – – – – – – – – … Connecting B R – – – – – – – – – – – – – – – – – – – – … … HFP/HSP or A2DP (Standby for receiving audio signal) B – – – – – – – – – R– – – – – –… HFP/HSP and A2DP B – R– – Listening B R– Listening during standby for telephone call B R– Incoming call B R– Talking B R– – – – – – – – – C
Re-pairing the transmitter and the headset 1 2 3 4 Turn on the power of iPod. (Make sure the iPod is in pause mode.) Connect the transmitter to the iPod (page 16). Place the transmitter and the headset to be paired together within 1 m (3 ft). Press and hold the POWER button of the headset for about 7 seconds or more to enter “Pairing in process” while the headset is turned off.
Calling with headset Preparation for calling (Bluetooth connection) Check the following before operating the headset. The Bluetooth function is active on the mobile phone. Pairing of the headset and the Bluetooth mobile phone is complete. – – Headset indicator (red) VOL – button VOL + button Multi function button 1 POWER button Headset indicator (blue) Press and hold the POWER button for about 3 seconds while the headset is turned off.
To make a connection by operating Bluetooth mobile phone 1 Make the Bluetooth connection (HFP or HSP*) from the Bluetooth mobile phone to the headset. Refer to the manual supplied with your Bluetooth mobile phone for operation details. The list of recognized devices appears on the display of the Bluetooth mobile phone. The headset is displayed as “DR-BT21G.” When you use the Bluetooth mobile phone features both HFP (Hands-free Profile) and HSP (Headset Profile), set to HFP.
To receive a call When an incoming call arrives, a ring tone will be heard from the headset. 1 Press the multi function button on the headset. The ring tone differs in the following ways, depending on your mobile phone. – ring tone set on the headset – ring tone set on the mobile phone – ring tone set on the mobile phone only for Bluetooth connection Note If you received a call by pressing the button on the Bluetooth mobile phone, some Bluetooth mobile phones may have handset use priority.
Controlling the Bluetooth mobile phone – HFP, HSP The operation of the buttons on the headset varies depending on your mobile phone. HFP (Hands-free Profile) or HSP (Headset Profile) is used for Bluetooth mobile phone. Refer to the operating instructions supplied with your Bluetooth mobile phone on supported Bluetooth profiles or how to operate.
Calling while playing back music The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make a call while playing back music. For example, to make a call using a Bluetooth mobile phone while listening to music on a Bluetooth compatible music player, the headset needs to be connected to the mobile phone using HFP or HSP. Make a Bluetooth connection between the headset and the device in use following the procedures outlined below.
Additional Information Precautions On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment. Steel cabinet The transmitter Optimal performance Limited performance The aerial of the headset is built into the right housing as illustrated in the dotted line.
Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident.
On the supplied AC power adaptor Use the AC power adaptor supplied with this product. Do not use any other AC power adaptor since it may cause the headset to malfunction. Polarity of the plug If you are not going to use the AC power adaptor for a long time, unplug it from the AC outlet. To remove the AC power adaptor from the wall outlet, grasp the adaptor plug itself; never pull the cord. Others Be careful not to pinch your fingers when folding the headset.
Troubleshooting If you run into any problems using this product, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer. 36 Symptom Cause / Remedy The transmitter is not turned on. (Or turns off shortly after turning on.) Press and hold the transmitter’s power button for about 1 second. Check the remaining battery of the iPod. If the remaining battery is not enough, charge the iPod. Reset your iPod.
Symptom Cause / Remedy Sound break, noise or playback speed change. If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources. Remove any obstacle between the transmitter and the headset or move away from the obstacle. Locate the transmitter and the headset as near as possible. Re-position or re-orient the transmitter and the headset. The headset does not operate properly.
Initializing Initializing the transmitter You can reset the transmitter to its default and delete all pairing information. 1 2 Connect the transmitter to the iPod. Press and hold the power button for more than about 15 seconds.
Specifications General Headset Output Communication System Maximum communication range Compatible Bluetooth Profiles*3 Bluetooth Specification Power Class 2 Line of sight approx. 10 m (30 ft)*1 Frequency band 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Modulation method FHSS Transmission range (A2DP) 20 - 20,000 Hz (Sampling frequency 44.1 kHz) Transmitter Communication System Bluetooth Specification Version 2.
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc. *2 Enhanced Data Rate *3 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. *4 Codec: Audio signal compression and conversion format *5 Subband Codec Design and specifications are subject to change without notice.
US
ADVERTENCIA Para reducir el riesgo de incendios o electrocución, no exponga el aparato a la lluvia ni a la humedad. Para evitar descargas eléctricas, no abra la unidad. En caso de avería, solicite los servicios de personal cualificado. No sitúe el aparato en un espacio cerrado, como una estantería o un armario empotrado. Para reducir el riesgo de incendios, no cubra la ventilación del aparato con periódicos, manteles, cortinas, etc. ni coloque velas encendidas encima del mismo.
Modelos de iPod compatibles Los modelos de iPod compatibles son los siguientes. Se recomienda la actualización del software del iPod a la última versión antes de proceder a su utilización con esta unidad. iPod nano de tercera generación (vídeo) iPod classic Notas Este transmisor Bluetooth está diseñado para reproductores iPod únicamente. No es posible conectar otros reproductores de audio portátiles.
ES
Tabla de contenido ¿Qué es la tecnología inalámbrica Bluetooth?........ 6 Características........................... 7 Procedimientos iniciales Comprobación de los elementos suministrados..... 8 Ubicación y función de los componentes.......................... 9 Auriculares Bluetooth................... 9 Transmisor Bluetooth..................10 Utilización básica de los auriculares.............................11 Carga de los auriculares.............11 Plegado............................................
¿Qué es la tecnología inalámbrica Bluetooth? BluetoothTM es una tecnología inalámbrica de corto alcance que permite la comunicación inalámbrica de datos entre dispositivos digitales como, por ejemplo, un ordenador o una cámara digital. La tecnología inalámbrica Bluetooth funciona en un rango de aproximadamente 10 metros. Lo habitual es conectar dos dispositivos, pero algunos dispositivos admiten la conexión a varios dispositivos a la vez.
Características Esta unidad es un kit de audio compuesto por un transmisor y unos auriculares que utilizan tecnología inalámbrica Bluetooth. Puede escuchar música de forma inalámbrica mediante la transmisión de señales de audio a unos auriculares a través de la conexión del transmisor Bluetooth al iPod (consulte la página 3 para obtener información acerca de los modelos de iPod compatibles) con el conector para iPod* (de 30 clavijas).
Procedimientos iniciales Comprobación de los elementos suministrados Auriculares Bluetooth DR-BT21G (1) Transmisor Bluetooth TMR-BT8iP (1) Adaptador de alimentación de ca (1) Manual de instrucciones (este documento) (1) Tarjeta de garantía (1) ES
Ubicación y función de los componentes Auriculares Bluetooth Indicador de auriculares (azul) Indica el estado de la comunicación de los auriculares. Indicador de auriculares (rojo) Indica el estado de la alimentación de los auriculares. Botón multifunción Controla varias funciones durante la llamada con los auriculares mediante la combinación con un teléfono móvil Bluetooth. Pulse los botones con puntos táctiles.
Transmisor Bluetooth Conector para iPod (de 30 clavijas) Se conecta al conector de puertos del dispositivo iPod (página 16). Indicador del transmisor Indica el estado del transmisor (página 24). Botón de alimentación Realiza las siguientes funciones: • Encender/apagar el transmisor (página 16). • Emparejamiento (página 21). • Inicialización del transmisor (página 41). En adelante, “los auriculares Bluetooth” aparecerán abreviados como “auriculares”, y el “transmisor Bluetooth” como “transmisor”.
Utilización básica de los auriculares Carga de los auriculares Los auriculares contienen una batería de iones de litio recargable, que se debe cargar antes de utilizarla por primera vez. 1 Conecte el adaptador de alimentación de ca suministrado a la toma DC IN 3 V de los auriculares. Auriculares Bluetooth A la toma DC IN 3 V A una toma de corriente de ca Adaptador de alimentación de ca (suministrado) La carga comienza al conectar el adaptador de alimentación de ca a una toma de corriente de ca.
Precaución Si los auriculares detectan un problema durante la carga, es posible que el indicador de los auriculares (rojo) se apague aunque no haya finalizado la carga. Compruebe si se debe a las causas siguientes: – La temperatura ambiental excede la gama entre los 0 ºC y los 40 ºC. – La batería tiene un problema. En este caso, cárguela de nuevo entre las temperaturas indicadas anteriormente. Si el problema persiste, póngase en contacto con el distribuidor Sony más cercano.
Comprobación de la batería restante Si pulsa el botón POWER mientras los auriculares están encendidos, el indicador (rojo) parpadeará. Puede comprobar la batería restante mediante el número de veces que parpadea el indicador de los auriculares (rojo). Indicador de los auriculares (rojo) Estado 3 veces Completa 2 veces Media 1 vez Baja (debe cargarla) Nota No puede comprobar la carga restante inmediatamente después de encender los auriculares o durante el emparejamiento.
Plegado 1 Sujete la parte plegable con ambas manos y levante la unidad izquierda para doblarla como se muestra en la ilustración. Desplegado 1 Despliegue la banda para el cuello derecha e izquierda como se muestra en la ilustración. Pliegue la unidad derecha del mismo modo. 2 2 Levante y abra la mitad restante de la banda para el cuello. Cierre ambas partes de la banda para el cuello. Notas No la abra de esta forma.
Colocación 1 2 3 Coloque la banda sobre el cuello. El auricular con el botón POWER es la unidad derecha (para la oreja derecha). Coloque los auriculares ligeramente por encima del nivel de la oreja, baje la banda para el cuello de modo que los auriculares queden bien encajados en las orejas y coloque las almohadillas sobre éstas. Ajuste el ángulo y la posición de la banda para el cuello para que los auriculares se fijen con comodidad sobre las orejas.
Conexión a un iPod Conecte firmemente el transmisor al conector de puertos de un iPod (consulte la página 3 para obtener información acerca de los modelos de iPod compatibles). Toma de conector de puertos (de 30 clavijas) Botón de alimentación Para encender el transmisor 1 2 Conecte el transmisor al iPod. Pulse el botón de alimentación del transmisor durante 1 segundo aproximadamente para encenderlo o inicie la reproducción en el iPod. Cuando se enciende el transmisor, el indicador parpadea dos veces.
Notas Para escuchar música a través de la toma de auriculares del iPod, desconecte el transmisor del iPod. Mientras el transmisor esté encendido, consume energía del dispositivo iPod. Se recomienda desconectar el transmisor del iPod cuando no se utiliza la función Bluetooth. Si se conectan los auriculares al iPod durante la reproducción en éste, se consume alimentación del iPod. Si apaga el transmisor durante la reproducción en el iPod, éste se apagará.
Funcionamiento Escuchar música del iPod Puede escuchar música del iPod (consulte la página 3 para obtener información acerca de los modelos de iPod compatibles) a través de los auriculares. 1 2 Mantenga pulsado el botón POWER de los auriculares durante aproximadamente 3 segundos. Los indicadores de los auriculares (azul) y (rojo) parpadean dos veces juntos y la unidad se enciende. Conecte el transmisor al iPod y, a continuación, encienda el iPod e inicie la reproducción en éste.
Sugerencia Es posible controlar el volumen en los auriculares. (El volumen del iPod no ha cambiado.) También es posible avanzar o retroceder rápidamente durante la reproducción (página 20). Notas Aunque controle el volumen en el dispositivo iPod, el sonido emitido desde los auriculares no cambiará. Si el transmisor y los auriculares salen del rango de comunicación y la conexión Bluetooth finaliza, repita el procedimiento desde el paso 1.
Control de un iPod con los auriculares Es posible controlar un iPod (consulte la página 3 para obtener información acerca de los modelos de iPod compatibles) mediante el botón de control de los auriculares. Antes de utilizar el mando a distancia, compruebe que se hayan realizado los pasos 1 y 2 de “Escuchar música del iPod” (página 18). Transmisor Control del iPod Mando a distancia (reproducir, pausa, etc.
Funcionamiento avanzado Emparejamiento con otros dispositivos Bluetooth ¿Qué es el emparejamiento? Los dispositivos Bluetooth deben “emparejarse” previamente entre sí. Una vez que los dispositivos Bluetooth se han emparejado, no es necesario volver a hacerlo excepto en los casos siguientes: Si la información de emparejamiento se ha eliminado tras una reparación, etc. Cuando la unidad se ha emparejado con 9 o más dispositivos receptores.
Notas La contraseña* del transmisor es “0000”, “1234” o “8888”. En función del dispositivo Bluetooth receptor, es posible que sea necesario introducirla (en este caso, “0000”, “1234” o “8888”). El transmisor no podrá emparejarse con un dispositivo Bluetooth receptor cuya contraseña no sea “0000”, “1234” o “8888”. Si se solicita una clave de acceso en el dispositivo Bluetooth receptor, introduzca “0000”.
El indicador del transmisor parpadea rápidamente: Emparejamiento en proceso El indicador del transmisor parpadea (en intervalos de 1 segundo) al responder al dispositivo Bluetooth receptor: Conexiones disponibles (Emparejamiento finalizado correctamente) El indicador del transmisor parpadea (en intervalos de 5 segundos): Conexión establecida Notas La función “Emparejamiento en proceso” del transmisor se desactiva transcurridos unos 5 minutos.
Acerca del indicador del transmisor Conexión establecida Conexión Emparejamiento Apagado Encendido Estado Indicador Parpadea dos veces Parpadea una vez … Parpadea rápidamente Parpadea (en intervalos de 1 segundo) Escuchar *1 (parpadea dos veces en intervalos de aproximadamente 5 segundos) Con la música apagada*2 (parpadea una vez en intervalos de aproximadamente 5 segundos) – – – ––––– ––––– – –… –––––… –––––… *1 Al pulsar en el iPod, se inserta una pausa en la reproducción de músic
Emparejamiento de los auriculares con otros dispositivos de transmisión Bluetooth 1 2 3 Coloque el dispositivo de transmisión Bluetooth que va a emparejar a menos de 1 m de los auriculares. Mantenga pulsado el botón POWER de los auriculares durante unos 7 segundos como mínimo para activar la función “Emparejamiento en proceso” mientras los auriculares estén apagados. Suelte el botón POWER cuando el indicador de los auriculares empiece a parpadear rápidamente.
El indicador de estado de los auriculares cambiará del modo siguiente, y se establecerá el emparejamiento con el dispositivo de transmisión Bluetooth.
Acerca del indicador de los auriculares B : Indicador de auriculares (azul) R : Indicador de auriculares (rojo) Teléfono Música Conexión establecida Conexión Emparejamiento Estado Indicador – – – – – – – – – – – – –… –… – – – – … – – – – – – – – … … – – Búsqueda B R Conexiones disponibles B – – R– – – – – En proceso de conexión B R – – – – – – – – – – – – HFP/HSP o A2DP B – – – – – – – – – R– – – – – –… B – R– – (en espera para recibir señal de audio) HFP/HSP y A2DP (e
Cómo volver a emparejar el transmisor y los auriculares 1 2 3 4 Encienda el iPod. (Asegúrese de que el iPod se encuentra en modo de pausa.) Conecte el transmisor al dispositivo iPod (página 16). Coloque el transmisor y los auriculares que va a emparejar a menos de 1 m. Mantenga pulsado el botón POWER de los auriculares durante unos 7 segundos como mínimo para activar la función “Emparejamiento en proceso” mientras los auriculares estén apagados.
Notas Al encender por primera vez el transmisor después de inicializarlo, la función “Emparejamiento en proceso” se activa automáticamente. Si mantiene pulsado el botón de alimentación durante 15 segundos, se inicializará la información de emparejamiento. El indicador del transmisor se enciende durante 5 segundos antes de que se comience la inicialización. Suelte el botón inmediatamente cuando se encienda el indicador del transmisor.
Realización de llamadas con los auriculares Preparación para efectuar llamadas (conexión Bluetooth) Antes de utilizar los auriculares, compruebe lo siguiente. – La función Bluetooth está activada en el teléfono móvil. – Ha finalizado el emparejamiento de los auriculares y el teléfono móvil Bluetooth.
Si los auriculares no se conectan a un teléfono móvil Bluetooth automáticamente Puede realizar una conexión utilizando el teléfono móvil Bluetooth o los auriculares para conectarse al último dispositivo Bluetooth al que se ha conectado. Para usar el teléfono móvil Bluetooth para realizar la conexión 1 Realice la conexión Bluetooth (HFP o HSP*) desde el teléfono móvil Bluetooth a los auriculares.
Para recibir una llamada Al recibir una llamada entrante, oirá un tono de llamada de los auriculares. 1 Pulse el botón multifunción de los auriculares. El tono de llamada varía de las formas siguientes, en función del teléfono móvil.
Control del teléfono móvil Bluetooth – HFP, HSP El uso de los botones de los auriculares varía en función del teléfono móvil que utilice. Para efectuar el emparejamiento con un teléfono móvil Bluetooth se utilizan los perfiles HFP (Hands-free Profile) o HSP (Headset Profile). Consulte el manual de instrucciones suministrado junto con el teléfono móvil para obtener información sobre los perfiles Bluetooth admitidos y cómo funcionan.
Realización de llamadas durante la reproducción de música La conexión Bluetooth con HFP o HSP, así como con A2DP, es necesaria para realizar una llamada mientras reproduce música. Por ejemplo, para realizar una llamada con un teléfono móvil Bluetooth mientras escucha música en un reproductor de música compatible con Bluetooth, los auriculares deben estar conectados al teléfono móvil con HFP o HSP.
Información complementaria Precauciones Comunicación Bluetooth La tecnología inalámbrica Bluetooth funciona en un rango de aproximadamente 10 metros. El rango máximo de comunicación puede variar en función de los obstáculos (personas, objetos metálicos, paredes, etc.) o del entorno electromagnético. Exterior de acero Transmisor Rendimiento óptimo Rendimiento limitado La antena de los auriculares está incorporada en el receptáculo derecho como se muestra con la línea de puntos.
Las microondas que emite un dispositivo Bluetooth pueden afectar el funcionamiento de dispositivos médicos electrónicos.
Adaptador de alimentación de ca suministrado Utilice solamente el adaptador de alimentación de ca suministrado con esta unidad. No utilice ningún otro adaptador de alimentación de ca, ya que puede causar un mal funcionamiento de los auriculares. Las almohadillas son consumibles. Pueden deteriorarse debido a un almacenamiento o uso prolongado. Cámbielas por otras nuevas cuando se estropeen.
Solución de problemas Si tiene dificultades para utilizar esta unidad, sírvase de la siguiente lista de comprobaciones y consulte la información de ayuda del producto en nuestro sitio Web. Si el problema persiste, consulte con el distribuidor Sony más cercano. 38 Problema Causa / Solución El transmisor no está encendido. (o se enciende un momento y se apaga.) Mantenga pulsado el botón de la alimentación del transmisor durante unos 1 segundo. Compruebe la batería restante del dispositivo iPod.
Problema Causa / Solución No es posible modificar el nivel de volumen. Modifique el nivel de volumen en los auriculares. El sonido se emite distorsionado Baje el volumen de los auriculares hasta que el sonido no se emita distorsionado. Asegúrese de que la unidad no recibe interferencias de una red LAN inalámbrica, de otros dispositivos inalámbricos de 2,4 GHz o de un horno microondas. Desactive la función EQ del iPod.
40 Problema Causa / Solución No es posible efectuar la conexión Bluetooth. Compruebe que la unidad está encendida. La conexión Bluetooth ha finalizado. Establezca la conexión Bluetooth de nuevo. No es posible realizar la conexión Bluetooth desde el teléfono móvil a los auriculares. Pulse el botón multifunción de los auriculares. (La conexión Bluetooth no está disponible durante la reproducción de música en los auriculares.
Inicialización Inicialización del transmisor Es posible restablecer el transmisor a los ajustes predeterminados y eliminar toda la información de emparejamiento. 1 2 Conecte el transmisor al iPod. Mantenga pulsado el botón de alimentación durante más de 15 segundos aproximadamente.
Especificaciones Generales Salida Clase de potencia 2 de la especificación Bluetooth Rango de comunicación máximo Línea de vista de aprox. 10 m*1 Banda de frecuencia Banda de 2,4 GHz (2,4000 GHz 2,4835 GHz) Método de modulación FHSS Intervalo de transmisión (A2DP) 20 - 20.000 Hz (frecuencia de muestreo de 44,1 kHz) Transmisor Sistema de comunicación Especificación Bluetooth versión 2.
Micrófono Tipo Condensador de electreto omnidireccional Gama de frecuencias efectiva 100 – 4.000 Hz *1 El rango real variará en función de factores como, por ejemplo, los obstáculos que puedan interponerse entre los dispositivos, los campos magnéticos que puedan existir en torno a hornos microondas, la electricidad estática, la sensibilidad de recepción o el rendimiento de la antena, el sistema operativo, la aplicación de software, etc.
Printed in Malaysia (1)