Operating Instructions Data Projector VPL-FX52, FX52L

37 Accessing the Projector from a Computer / Checking the Status of the Projector
Operation and Administration using a Network
B Operation and Administration using a Network
Accessing the
Projector from a
Computer
You can check the present status of the
projector on a computer display and control
the projector from a computer. Also, the
projector enables the sending of mail that
contains messages on the time for
replacement of the projector lamp, error
occurrences, etc., to mail addresses that have
been specified.
Before operating
Confirm that the projector is connected to
the LAN, then turn on the projector. For
details on connection, consult with your
network administrator.
1 Start Internet Explorer 5.0 (or later
versions) on your computer.
2 Type “http://xxx.xxx.xxx.xxx (the IP
address of the projector)” as the
“Address,” then press the ENTER
key.
You can confirm the IP address of the
projector in the “Information menu” on
page 36.
When you access the projector via a Web
browser, do not use a proxy server.
Checking the Status
of the Projector
Click “Information.”
You can check the information and present
status of the projector on a computer display.
You can check the information and status in
the window, but you cannot change the
settings.
INFORMATION
The present status of the projector is
displayed.
MENU
The present settings of the projector are
displayed.
note
Enter the IP address here.