LCD Projection TV Operating Instructions
Table Of Contents
- Introducing the Sony LCD Projection TV
- Setting Up the LCD Projection TV
- Overview
- LCD Projection TV Front Panel and Connectors
- Installing the LCD Projection TV
- Basic Connections: Connecting a Cable or Antenna
- Connecting Optional Equipment
- Making Video Connections
- About Using SVIDEO
- VCR and Cable
- VCR and Cable Box
- Two VCRs for Tape Editing
- Satellite Receiver
- Satellite Receiver with a VCR and Cable
- DVD Player with Component Video Connectors
- DVD Player with S VIDEO and Audio Connectors
- Camcorder
- Audio Receiver
- Digital Cable Box
- Digital Satellite Receiver
- Digital Satellite Receiver with HDMI Connector
- Connecting a Device with an Optical IN Connector
- Using the CONTROL S Feature
- Using CableCARD
- Setting Up the LCD Projection TV Channel List
- Using the Remote Control
- Using the Features
- Using the Memory Stick Viewer
- Using the Menus
- Other Information
- Index
Introducing the Sony LCD Projection TV
20
KDF-WE/WF655
2-059-370-14 (2)
For KDF-WF655 series
1 Turn off the power on the main unit. Wait several minutes, then unplug
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
2 Wait at least 30 minutes after unplugging the power cord to allow the
lamp to cool down before replacing it.
Take the new lamp out of the box.
3 Loosen the screws on the rear side panel.
4 Remove the front panel.
✍ Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
✍ Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
S
T
D
/
D
U
O
P
O
W
E
R
P
R
O
01COV.book Page 20 Thursday, February 17, 2005 8:01 PM