3-097-195-11(1) Micro HI-FI Component System Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. ______________ Serial No. ______________ CMT-DH7BT © 2007 Sony Corporation CMT-DH7BT.GB.
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION The use of optical instruments with this product will increase eye hazard. Notice for the customers in the U.S.A. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
des , in ound e point pplies el S.A. with found B the d to t es, CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
Table of Contents Play Type About this manual ............................... 3 Playable discs ........................................ 5 Guide to parts and controls ............. 8 Bluetooth DVD V Using the Bluetooth function ........52 Getting Started Sound Adjustment VR mo Hooking up the system....................14 Hooking up the TV.............................17 Setting the clock ................................19 Performing QUICK SETUP ...............20 Using the THEATRE SYNC function .......
Playable discs Type DVD VIDEO .....52 Characteristics Icon used in this manual Logo DVD VIDEO DVD-R*/-RW*/+R/+RW in DVD VIDEO format * also in video mode VR mode .....58 VIDEO CD .....59 .....60 CD DVD-R/-RW in VR (Video Recording) mode VIDEO CD Super VCD* CD-ROM*/-R*/-RW* * in VIDEO CD or Super VCD format .....
Discs that cannot be played CD-ROMs recorded in PHOTO CD format DATA CDs recorded in MP3 PRO format Data part of CD-Extras1) Data part of Mixed CDs2) Super Audio CDs DVD Audio discs DVD-RAMs A DVD VIDEO with a different region code. A disc that has a non-standard shape (e.g., heart, square, star). A disc that has the adhesive cellophane tape or a sticker still left on it.
duct al rial he m to back Since this system play back DVD VIDEOs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVD VIDEOs or VIDEO CDs. Music discs encoded with copyright protection technologies ot be o the dition of ng yed see ns RWs/ ctly sc by rmat s of cers. This product is designed to play back discs that conform to the Compact Disc (CD) standard.
Guide to parts and controls Remo This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit (HCD-DH7BT/Compact Disc Receiver) Front panel Top panel Unit: 79) Remo (11) Press t Press t STAN Lights 8GB CMT-DH7BT.GB.
Remote control (RM-SCD30) Lights up when the Bluetooth function is active. can Unit: (on/standby) (11, 69, 79) Remote: TV 2) (on/standby) (11) Press to turn on the system. Press to turn on the TV. BLUETOOTH OPR (57) Press to make a connection, disconnection, or pairing with a Bluetooth device. (eject) (59, 72) Press to eject the disc.
Unit: AUDIO IN (XX, XX) AUDIO IN jack (55, 56, 68) Press to select the AUDIO IN function. AUDI Connect to an optional audio component. PHONES jack (55) FUNCTION +/ (14, 51, 54, 63, 70, 78) Press to select the function. Connect the headphones. Unit: REPEAT/FM MODE (XX, XX) Remote: FM MODE (53) Remote: REPEAT (25) DISPLAY (19) Press to display the disc information or clock in the front panel display. PROGRESSIVE (XX, XX) Press to select FM reception mode (monaural or stereo).
STEP/ STEP (20) AUDIO (29, 37, 63, 78) Press to play one frame at a time when playback is paused. 3, Press to display the current audio signal on the TV screen. RETURN (26) SUBTITLE (38) XX) Press to switch the language of the subtitle (DVD VIDEO). Press to change the angle (DVD VIDEO with multi-angles only). 1) 4, Press to select the MENU items. ENTER (14, 19, 39, 50, 63, 69) DVD/TUNER MENU (25, 51) Press to display the MENU items on the TV screen.
Displa XM (XX, XX) Press to select XM band. SIRIUS (XX, XX) Press to select SIRIUS band. CATEGORY +/ (XX, XX) Press to select a satellite radio category. CATEGORY MODE (XX, XX) Press to select the tuning mode for XM or SIRIUS band. TIME/TEXT (73) Press to change the information in the front panel display. TV/VIDEO2) (11) Press to switch the input sources. SLEEP (53, 69) Press to set the Sleep Timer. TIMER MENU (14, 69) Press to set the clock and the timers.
Display Guide to parts and controls Indicates the selected function. (21) Indicates the selected play mode. (16) Lights up when timer is set. (56) Lights up when a station is tuned in. (xx) Lights up when DSGX is turned on. (62) Indicates the Playback status. (xx) Lights up when DTS is selected. (63) Lights up when Dolby Digital is selected. (xx) Lights up when CATEGORY MODE is selected. (xx) Lights up when “P AUTO” or “P VIDEO” is selected.
SI Getting Started Conne When tuner w the AC tuner t Keep t antenn from t cord to Hooking up the system Wall socket XM Conne Dock. Satellit Sp Po Conne If the s not fit the plu an ada Right speaker Left speaker SiriusConnect Home tuner (not supplied) Home indoor/outdoor antenna (not supplied)* AC power adaptor (not supplied)* DIN cable (not supplied)* XM Mini-Tuner and Home Dock (not supplied) FM lead antenna (Extend it horizontally.) Connect white side.
SIRIUS antenna XM antenna Connect the XM Mini-Tuner and Home Dock. For details, see “To receive the XM Satellite Radio” (page xx) With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Attaching the speaker pads Attach the supplied speaker pads at each corner on the bottom of the speakers to stabilize the speakers and to prevent them from slipping. Getting Started Connect the SiriusConnect Home tuner.
Receiving the XM Satellite Radio ABOUT XM SATELLITE RADIO XM offers over 170 digital radio channels: the most commercial-free music channels, premier news, sports, talk, and traffic and weather in 21 metro markets. XM’s on-air hosts broadcast live from studios in Washington, D.C., New York City and Nashville. For more information or to subscribe in the US, visit xmradio.com or call Listener Care at 1-800-XMRADIO (1-800-967-2346). XM READY® LEGAL XM monthly service subscription sold separately.
the for Receiving the SIRIUS Satellite Radio e XM ou nd full es 10 ods ome n you ur XM With everything from 100% commercial-free music to in-depth sports coverage, plus news, talk and the hottest entertainment you can always hear exactly what you want. The only home of 100% commercial-free music. Whether you’re discovering new music, or rediscovering songs you haven’t heard in years you’ll hear it all on SIRIUS. Live play-by-play and expert talk from the biggest leagues.
Tip For higher quality video images: Use the optional component video cords to connect the COMPONENT VIDEO input jacks on your TV to the COMPONENT VIDEO OUT jacks of this unit. If your TV is compatible with progressive format file signals, use this connection and press PROGRESSIVE on the unit repeatedly until “P AUTO” or “P VIDEO” appears in the display (page 16). You can use an optional S Video cord to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack of this unit.
O): When using a TV EO Turn on the TV and select the video input so that you can view the pictures from this system. and Operating a Sony TV You can use the following buttons to operate a Sony TV. These buttons have been marked in orange. om 4 rom and 0 ypes es to he at, the erted re. the t To Turn the TV on or off Switch the TV’s input source between the TV and other input sources Select the TV channels Adjust the volume of the TV speaker(s) Use buttons on the remote to set the clock.
Performing QUICK SETUP 5 Tips The selected language is for “OSD”, “MENU” and “SUBTITLE ”. The selectable language is different depending on the area. Before using the system, you can make the minimum basic adjustments in QUICK SETUP. If you do not want to perform QUICK SETUP, press CLEAR in step 3. The guide message will disappear from the TV screen. 1 2 Turn on your TV and select the video input. The setting is selected and the “SCREEN SETUP” display appears on the TV screen.
to ss To recall of QUICK SETUP settings t Press or repeatedly to 2 select ENTER . ars on (SETUP), then press Using the THEATRE SYNC function THEATRE SYNC allows you to turn on your Sony TV and this system, changes the system’s function to “DVD” and then switches the TV’s input source you have set with just one button. 3 Press or repeatedly to select “QUICK”, then press ENTER .
Operating the THEATRE SYNC function Keep the remote pointed in the direction of the TV until the TV is turned on and the input source is changed correctly, then press THEATRE SYNC . If this function does not work, change the transmission time. The transmission time varies depending on the TV. To change the transmission time Hold down and press 1 2 3 4 5 6 7 8 To select the following transmission time 0.5 (Default) 1 1.5 2 2.5 3 3.5 4 22GB CMT-DH7BT.GB.
Notes Disc Playing a disc Normal Play Example: When playing a DVD VIDEO Title number Elapsed playing time 1 Press FUNCTION +/ repeatedly to select “DVD” (or press DVD on the unit). 2 Insert a disc with the label side facing up. 3 4 Press . Other operations To Press Stop playback . Pause playback . Press again or to resume playback. Select a track1), or chapter or repeatedly during video file playback.
To Watch frame by frame (Slowmotion Play)6) Press SLOW or SLOW when playback is paused. Each time you press SLOW , or SLOW the playback speed changes. To return to normal playback, press . Play one STEP to go to frame at a the next frame when time (Freeze playback is paused. Frame)6) Press STEP 7) to go to the preceding frame when playback is paused. To return to normal playback, press . during Replay the REPLAY previous scene playback.
a Replay Play Press SUBTITLE repeatedly during playback. Each time you press SUBTITLE , the subtitle language changes or turns off. Note while arious e Other useful functions Changing the sound When playing a DVD VIDEO recorded in multiple audio formats, you can select the audio format you want. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language. ay not -angles VR while he on orded.
Playing VIDEO CDs with PBC functions (Version 2.0) PBC Playback To cancel playback with PBC functions (VIDEO CD only) You can use the PBC (Playback Control) menus on your TV screen to enjoy the disc’s interactive software. The menu format and structure may differ depending on each disc. 1 Press or repeatedly Depe the sy the ex If “M Resu VIDE disc o 2 Press or ENTER . Tip 1 Press to start playing a VIDEO Playback starts from the selected track.
y is Depending on where you stopped the disc, the system may not resume playback from the exact same point. If “MULTI-DISC RESUME” is set to “ON”, Resume Play is not canceled for DVD VIDEO and VIDEO CD when you eject the disc or change the function. Using play mode Creating your own program Program Play nt you here ume Play he and to To play back from the beginning of the disc, press twice, then press .
4 Press . The cursor moves to the track row “T” (in this case, “01”). 6 To program other tracks, repeat steps 4 to 5. 7 Press . Program Play starts. When the Program Play ends, you can restart the same program by pressing . To cancel Program Play To change a programmed step: Press or repeatedly to select the programmed step number you want to change. Then, press . To delete a programmed step: Press or repeatedly to select the programmed step number you want to change.
peat Playing in random order 4 Shuffle Play starts. To cancel Shuffle Play, press CLEAR or select “OFF” in step 3. Shuffle Play ou y 1 Press DISPLAY during playback. The Control Menu appears on the TV screen. ntil the nged ” or h ogram 2 Press or repeatedly to select (SHUFFLE), then press ENTER . To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu disappears from the TV screen.
2 Press or repeatedly to select (REPEAT), then press ENTER . The options for “REPEAT” appear on the TV screen. 3 Press or repeatedly to select the setting you want. OFF (default setting) DISC TITLE (DVD VIDEO or DVDR/-RW in VR mode) CHAPTER (DVD VIDEO or DVDR/-RW in VR mode) TRACK1) (AUDIO CD, VIDEO CD, DATA CD/DVD2)) ALBUM (DATA CD/DVD) ON (Shuffle Play or Program Play). 4 Press ENTER . Repeat Play starts. To cancel Repeat Play, press CLEAR or select “OFF” in step 3.
tting epeat N”. TER”, h mage he t. ODE )” Playing DVD VIDEOs using the menu Some DVD VIDEOs have menus to help you enjoy the DVD VIDEOs. You can play back DVD VIDEOs using these menus on the TV screen. Using DVD TOP MENU A DVD VIDEO contains a lot of sections of picture or music feature called “title”. When you play back a DVD VIDEO which contains several titles, you can select the title you want using DVD TOP MENU.
Using the on-screen display to search for a title/chapter/ scene/track/index/album/file 4 Select the title, track, album, etc. or file number (/ or numeric buttons ). 1 2 DISPLAY . (When Press playing a DATA CD/DVD with JPEG image files, press DISPLAY twice.) Press ENTER . Press DISPLAY repeatedly.
m, or Note Searching by scene Picture Navigation Depending on the disc, you may not be able to select some items. Tip r. 1 d off, EO and DIO meric Disc the Press PICTURE NAVI repeatedly to select the VIEWER format you want to search in. To display the remaining chapters, titles, or tracks, select a scene at the bottom row and press . To return to the previous scene, select a scene at the top row and press .
Playing MP3/JPEG discs Notes Depending on the software you use to create the DATA CD or DATA DVD, the playback order may differ. The playback order above may not be applicable if there are more than 200 albums and 300 tracks/files in each album. The system can play back up to 200 albums, including albums that do not contain MP3 audio tracks and JPEG image files. The system will not play back any albums beyond the 200th album.
ease tree non- Selecting an MP3 audio track or album 1 Insert a disc in the disc slot. The list of albums appears. album MP3, 8 To play back the next album of MP3 audio tracks 2 Press or repeatedly to select an album. Playing an album: Press . The system starts playback from the first track of the selected album. Playing a track: 1 Press ENTER . The list of MP3 audio tracks of the selected album appears.
Playing an image file: 1 Press PICTURE NAVI . Thumbnail picture for the first 16 JPEG image files in the selected album is displayed. To play back the next album of JPEG image files You can select the next album by pressing repeatedly until the last file of the current album, then press once. The first file of the next album is selected. However, you cannot select the previous album by pressing repeatedly. To select the previous album, select the album from the album list.
EG bum You can play back a slide show with sound by first placing both JPEG image files and MP3 audio tracks in the same album on a DATA CD/DVD. 1 Insert a disc in the disc slot. The list of albums appears on the TV screen. 2 d on mage ewing 3 iginal DISPLAY . The Control Menu appears on the TV screen. Press Press or repeatedly to select (MODE (MP3, JPEG)), then press ENTER . The options for “MODE (MP3, JPEG)” appear on the TV screen.
Specifying the slide show speed (JPEG image files only) DISPLAY repeatedly until the Control Menu for JPEG image files appears on the TV screen. 1 Press 2 Press or repeatedly to select (INTERVAL), then press ENTER . The options for “INTERVAL” appear on the TV screen. 3 Press or repeatedly to select the transition interval you want. The intervals become longer in the order from “FAST”, “NORMAL” (default setting), “SLOW 1”, to “SLOW 2”.
lect e mly es A/V SYNC When the sound does not synchronize with the pictures on the screen, you can adjust the delay between the picture and sound. A/V SYNC does not work for MP3 audio tracks and JPEG image files in DATA CD/DVD. 1 Press DISPLAY when playback is stopped. The Control Menu appears on the TV screen. 2 Press or repeatedly to select (A/V SYNC), then press ENTER . The options for “A/V SYNC” appear on the TV screen. 3 Press or repeatedly to select the setting you want.
3 Press or repeatedly to select (PARENTAL CONTROL), then press ENTER . The options for “PARENTAL CONTROL” appear on the TV screen. 4 Press or repeatedly to select “ON ”, then press ENTER . To turn off the Custom Parental Control function, select “OFF ”, then press ENTER . If you make a mistake when entering your password Press repeatedly to delete the number you have entered, then re-enter your password again.
ring Limiting playback for children 4 PARENTAL CONTROL nter om 1 The display for setting the playback limitation level appears. Disc m (DVD VIDEO only) You can limit the playback of some DVD VIDEOs according to a predetermined level such as the age of the users. Enter or re-enter your 4-digit password using the numeric buttons , then press ENTER . Press DISPLAY when playback is stopped. The Control Menu appears on the TV screen.
8 Press or repeatedly to select the level you want, then press ENTER . Parental Control setting is completed. The lower the value, the stricter the limitation. To turn off the Parental Control function, set “LEVEL” to “OFF”. Tip If you forget your password, remove the disc and repeat steps 1 to 3 of “Limiting playback for children”. When you are asked to enter your password, enter “199703” using the numeric buttons , then press ENTER . The display will ask you to enter a new 4-digit password.
5 Enter a new 4-digit password using the numeric buttons , then press ENTER . 6 To confirm your password, re-enter it using the numeric buttons , then press ENTER . If you make a mistake when entering your password Press repeatedly to delete the number you have entered, then re-enter your password again. Using the DVD setup menu By using the DVD setup menu, you can make various adjustments to items such as picture and sound.
4 Press or repeatedly to select the setup item from the displayed list: “LANGUAGE SETUP”, “SCREEN SETUP” or “CUSTOM SETUP”. Then press ENTER . 6 Press or repeatedly to select the setting you want, then press ENTER . The setting is selected and setup is completed. The setup item is selected.
to , is SUBTITLE* (DVD VIDEO only) Switches the language of the subtitle . When you select “AUDIO FOLLOW”, the language for the subtitles changes according to the language you selected for the sound track. “SUBTITLE”, or “AUDIO” that is not recorded on the DVD VIDEO, one of the recorded language is automatically selected. However, depending on the disc, the language may not be selected automatically.
BLACK LEVEL (COMPONENT OUT) Select the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select “BLACK LEVEL (COMPONENT OUT)” when the system outputs progressive signal. OFF: Standard level ON: Raise the standard black level. Use this when the picture becomes too black. 4:3 OUTPUT3) Change this setting to watch 4:3 aspect ratio progressive signals.
Disc TRACK SELECTION (DVD VIDEO only) Gives priority to the sound track which contains the highest number of channels when you play back a DVD VIDEO on which multiple audio (PCM, DTS, MPEG audio, or Dolby Digital) formats1) are recorded. OFF: No priority given. AUTO2): Priority given. MULTI-DISC RESUME (DVD VIDEO and VIDEO CD only) ON: See page 23. OFF: Does not store the resume playback point in the memory. Playback starts at the resume playback point only for the current disc in the system. atically sa.
1 Press FUNCTION +/ repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/BAND on the unit repeatedly to select “FM” or “AM”). Tuner Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Press / to turn off the system. 2 2 Press FUNCTION +/ repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/ BAND on the unit repeatedly to select “FM” or “AM”).
edly AM” e unit ”). em. 3 Tune in the desired channel. 4 Adjust the volume. Press TUNING +/ repeatedly. Press VOLUME +/ . clock. To select a channel by Category mode d e 1 Press XM or SIRIUS (or TUNER/ BAND repeatedly). repeatedly until “CAT” appears. l the 1 Tune in the desired station (see “Listening to the radio” (page 48)). 2 Press DVD/TUNER MENU . “Memory?” flashes in the display. 3 A preset number flashes in the display. The stations are stored from preset number 1.
7 To listen to a preset station, press PRESET +/ repeatedly to select the preset station you want. 4 You can also press the numeric buttons , then press ENTER to select a preset station. 5 “EnterKey” appears. Notes on presetting XM or SIRIUS stations You cannot preset XM or SIRIUS stations except when you receive the station. You cannot operate CATEGORY +/– in preset tuning mode.
until To listen to the locked channels 1 Press SIRIUS (or TUNER/BAND repeatedly) to select “SIRIUS.” 2 Select a locked channel you want to d . rental listen to using the numeric buttons . “EnterKey” appears. 3 Enter your 4-digit password using To remove the Parental Lock Tuner the numeric buttons . 1 When the locked channel is tuned D in, press DVD/TUNER MENU , and then press or repeatedly until “Unlock?” appears. 2 Press ENTER . “Edit R .
Bluetooth Using the Bluetooth function This system supports Bluetooth A2DP and AVRCP profiles. For details on Bluetooth wireless technology, see “Bluetooth wireless technology” (page 34). Check the websites below for the latest information about compatible devices. For customers in the U.S.A.: For customers in Canada: For customers in Europe: For customers in Latin America:
Pairing this system with a Bluetooth device th oth ce he ur 1 Place the Bluetooth device to be connected to this system within 1 meter of the system. 2 Select the Bluetooth function. 3 Operate the Bluetooth device and perform the pairing operation. Press FUNCTION +/ repeatedly to select “Bluetooth” (or press Bluetooth on the unit). For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device.
To erase all the pairing registration information 1 Press FUNCTION +/ repeatedly to select “BLUETOOTH” (or press BLUETOOTH on the unit). When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR .
ice by oth s not using you To cancel the connection with a Bluetooth device Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator turns off. Other operation on. atedly ess nit). m the hed, llows: tooth vice, V ed You can listen to music played on this system using your Bluetooth headphones over a wireless connection. Press . . / . Hold down / . DISPLAY repeatedly when the system is on.
Pairing this system with Bluetooth headphones Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth headphones. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to “Playing music on this system” (page 18). 1 Select a function other than the Bluetooth function. Press FUNCTION +/ repeatedly.
y IN c. m is ring is m step Playing music on this system You can operate this system from Bluetooth headphones by connecting the system and Bluetooth headphones using AVRCP. 1 Select a function other than the Bluetooth function. Press FUNCTION +/ repeatedly. 2 , this ection Establish a connection with the Bluetooth headphones. on edly . ith a tooth n ress on ut the de. 3 Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator turns off.
Sound Adjustment Adjusting the sound Generating a more dynamic sound (Dynamic Sound Generator X-tra) You can reinforce the bass and create a more powerful sound. The DSGX setting is ideal for music sources. Press DSGX on the unit repeatedly. Each time you press the button, the display changes as follows: DSGX ON DSGX OFF Tip The default setting is “DSGX ON”. Setting the sound effect 1 Press EQ repeatedly to select “BASS” or “TREBLE”. 2 Press PRESET +/ repeatedly to adjust the level.
Other operations Using the timer Falling asleep to music Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP repeatedly. Other operations To Check the remaining time Change the time to turn off Cancel the Sleep Timer Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page18). 1 Insert a disc you want to play back. Then press VOLUME +/ . 2 3 Press TIMER MENU .
Other operations To Check the setting Do this 1 Press TIMER MENU . “TIMER SEL?” flashes in the display. 2 Press ENTER . 3 Press or repeatedly to select “PLAY SELECT?”, then press ENTER . Start from step 1. Change the setting Cancel the Play 1 Press TIMER Timer MENU . “TIMER SEL?” flashes in the display. 2 Press ENTER . 3 Press or repeatedly to select “TIMER OFF?”, then press ENTER . Changing the display View abo Checking the clock Press DISPLAY when the system is turned off.
y stem ayed Viewing information about the disc Viewing information about the disc in the front panel display Press DISPLAY . Each time you press DISPLAY , the the display changes from … Disc information Clock display (for 8 seconds) Checking the elapsed playing time, remaining time and titles Press TIME/TEXT during playback.
1) 2) 3) 4) “NO TEXT” appears in the display if the DVD VIDEO is not a DVD-TEXT disc, the AUDIO CD is not a CD-TEXT disc or the VIDEO CD does not have text information. The current chapter number and the current title number are displayed for 2 seconds before the display returns to elapsed playing time when you press TIME/TEXT during display of title of the disc. When Program Play or Shuffle Play is turned on, the elapsed playing time and the remaining time of the disc would be skipped.
the y on the are When playing an AUDIO CD or VIDEO CD without PBC function: Elapsed playing time of the current track Remaining time of the current track Elapsed playing time of the current disc Remaining time of the current disc Elapsed playing time of the current track and title of the disc When playing a DATA CD/DVD: Elapsed playing time of the current track/file Checking the date information of JPEG image files You can check the date information during playback when Exif* tag is recorde
Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. Front panel AUDIO IN jack Connect the audio output jack of an optional component (portable audio player, etc.). COMPONENT VIDEO OUT jacks Connect the component video input jacks of the TV or projector.
of an udio jacks nput our gnals, nd unit or “P quality Enjoying the multi channel sound with the optional amplifier 1 See “Hooking up optional components” on page81. 2 3 Start playing a multi channel source, such as a DVD VIDEO. 4 Select the audio format you want. See “Changing the sound” on page xx. m Other operations t jack t Connect the speakers to an optional amplifier equipped with a decoder.
General Additional Information Troubleshooting Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are connected correctly and firmly. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. If the STANDBY indicator flashes Immediately unplug the power cord, and check the following items.
on ven the king celed. or a tting et usic” the s lowress is lit r than d, no ers old H Speakers The timer does not function. Check the timer setting and set the correct time (page 69). Cancel the Sleep Timer function (page 69). Disc Player The remote does not function. Remove the obstacles between the remote and the unit. Move the remote closer to the unit. Point the remote at the unit’s sensor. Replace the batteries (R6/size AA). Locate the unit away from the fluorescent light.
Playback does not start from the first track. The system is in Program Play or Shuffle Play mode. Turn off Program Play and Shuffle Play. Resume Play has been selected. Press twice. Then, press to start playback (page 21). The title of DVD VIDEO or PBC menu automatically appears on the TV screen. Playback starts automatically. The DVD VIDEO features an auto playback function. Playback stops automatically. Some discs may contain an auto pause signal.
other not be th of MODE 00 es is set e the n er ks on time s on on itle, ers t The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track. Check the speaker connections and settings (pages 9 and 47). Depending on the DVD VIDEO, the output signal may not be the entire 5.1 channel. It may be monaural or stereo, even if the sound track is recorded in Dolby Digital or MPEG audio format.
Picture There is no picture. Press FUNCTION +/ repeatedly to select “DVD” (or press DVD on the unit). Check that the system is connected securely. The video cord is damaged. Replace it with a new one. Make sure you connect the unit to the video input jack of your TV (page 10). Make sure you turn on the TV and operate the TV correctly.
has to V, the DVD e ence irectly 10). m the e ks are e n h you N n you he TV. he ot TV t. the r up k ded on ack. ging The subtitles cannot be turned off. The DVD VIDEO prohibits turning off subtitles. The angles cannot be changed. Multi-angles are not recorded on the DVD VIDEO being played back. The DVD VIDEO prohibits changing the angles. Tuner The radio presetting is canceled. The power cord is disconnected or a power failure occurred for longer than half a day.
If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows: 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press to turn on the system. 4 Press , DISPLAY and at the same time. “RESET” appears in the display. The system is reset to the factory settings except for DVD settings. You should set the settings you made, such as the preset stations, clock and timer.
When displaying the version number on the TV screen he a ront e When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate. ctive Messages One of the following messages may appear or flash in the front panel display during operation.
PASSWORD Custom Parental Control or Parental Control is set. Please Wait The system is doing initialization process. Reading The system is reading information of the disc. Some buttons are not available. Bluetooth device Connect Bluetooth communication was established. Disconnect Communication with a Bluetooth device was cut off for some reason, or Bluetooth communication was ended. Not Connect Connection was not possible. No Device A pairable Bluetooth device was not found.
SIRIUS ck l n is dcast s not ing ation. w. the d to e not not em he ACQUIRING The receiving condition is not good. Try moving the antenna to another location. For details about the antenna location, see the instructions supplied with the SiriusConnect Home tuner. Call 888–539–SIRI You have not subscribed for the selected channel. CHECK SIRIUS The SiriusConnect Home tuner is not connected properly. Check all the connections, and then turn the system on again.
On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result.
sc en, per no ion DIN) ence) Bluetooth section Tuner section Communication system: Bluetooth Standard version 2.0 Output: Bluetooth Standard Power Class 2 Maximum communication range: Line of sight approx. 10 m1) Frequency band: 2.4 GHz band (2.4000 GHz – 2.
General Power requirements: 120 V AC, 60 Hz Power consumption: 40 W Dimensions (w/h/d) (Approx.): 190 × 141 × 272 mm Mass (Approx.): xx.x kg Supplied accessories: Remote Commander (1) R6 (Size AA) batteries (2) AM loop antenna (1) FM lead antenna (1) Video cord (1) Front speaker pads (8) Design and specifications are subject to change without notice. • Standby power consumption: 0.5 W • Halogenated flame retardants are not used in the certain printed wiring boards.
Guide to the Control Menu display Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on, turn off or change the Control Menu display as follows: Control Menu display 1 Control Menu display 2 (appears for certain discs only) Control Menu display off Control Menu display 1 … Control Menu display The Control Menu display 1 and 2 will show different items depending on the disc type.
List of Control Menu items Item Item Item Name, Relevant Disc Type, Function TITLE/SCENE/TRACK Selects the title, scene, or track to be played back. CHAPTER/INDEX Selects the chapter or index to be played back. TRACK Selects the track to be played back. ORIGINAL/PLAY LIST Selects the playback sequence either to the originally recorded sequence or to the playlist created on the disc. TIME/TEXT Checks the elapsed playing time and the remaining time. Input the time code for picture and music searching.
Item Item Name, Relevant Disc Type, Function SETUP QUICK Setup Use QUICK SETUP to choose the language of the on-screen display and the aspect ratio of the TV. CUSTOM Setup In addition to the Quick Setup setting, you can adjust other settings. RESET Returns the settings in “SETUP” to the default setting. ALBUM Selects the album to be played back. FILE Selects the JPEG image file to be played back. DATE Displays the date when the picture was taken by a digital camera.
Pare Language code list Code The language spellings conform to the ISO 639:1988 (E/F) standard.
Parental Control area code list ge e Code Area Code Area Code Area Code Area 2044 2047 2046 2057 2070 2079 2090 2092 2115 2165 2174 2109 2248 2238 2254 2276 2304 2363 2362 2376 2390 2379 2427 2424 2436 2489 2501 2149 2499 2086 2528 2184 Argentina Australia Austria Belgium Brazil Canada Chile China Denmark Finland France Germany India Indonesia Italy Japan Korea Malaysia Mexico Netherlands New Zealand Norway Pakistan Philippines Portugal Russia Singapore Spain Sweden Switzerland Thailand United
Bluetooth wireless technology Bluetooth wireless technology is a shortrange wireless technology linking digital devices, such as personal computers and digital still cameras. Using the Bluetooth wireless technology, you can operate the units involved within a range of about 10 meters. The Bluetooth wireless technology is commonly used between two devices, but a single device can be connected to multiple devices.
Effects on other devices ithin cted e ons. l he ion s e in gnetic N uency ooth AN s LAN tooth Notes This system supports security functions that comply with the Bluetooth specification as a means of ensuring security during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.
Glossary Album Section of a music or picture piece on a DATA CD or DATA DVD containing MP3 audio tracks, JPEG image files. Chapter Subdivision of a title on a DVD VIDEO. A title is composed of several chapters. Dolby Digital This sound format for movie theaters is more advanced than Dolby Surround Pro Logic. In this format, the surround speakers output stereo sound with an expanded frequency range and a subwoofer channel for deep bass is independently provided. This format is also called “5.
f ameter nd B DVD+RW Multilingual function A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format that is comparable to the DVD VIDEO format. Several languages for the sound or subtitles in a picture are recorded on some DVD VIDEOs. File dualO is ded yer GB. ards The 1/40 O ology d e. y you to as two eo VD Video s to Film based software, Video based software DVD VIDEOs can be classified as Film based or Video based software.
Region Code VIDEO CD This system is used to protect copyrights. A region code is allocated on each DVD system or DVD VIDEO according to the sales region. Each region code is shown on the unit as well as on the disc packaging. The system can play back the discs that match its region code. The system can also play back discs with the “ ALL ” mark. Even when the region code is not shown on the DVD VIDEO, the region limit may still be activated. A compact disc that contains moving pictures.
Index Numerics D L 16:9 69 4:3 LETTER BOX 69 4:3 OUTPUT 71 4:3 PAN SCAN 69 DATA CD 43, 47 DATA DVD 43, 47 DIMMER 59 DISPLAY 52 Dolby Digital 35, 83 DTS 35, 83 DVD 83 DVD+RW 84 DVD’s menu 35 DVD-RW 37, 84 Language Code List 86 LANGUAGE SETUP 69 Listening to other components 23 Listening to the radio xx Listening to TV sound 24 Locating a specific point by watching the TV screen 28 A A2DP 41 AVRCP 41 A/V SYNC 41 ALBUM 29 Album 83 ANGLE 40 AUDIO 69 AUDIO DRC 72 B E EFFECT 46 F Fast forward 28 Fast rev
P T PARENTAL CONTROL 61 Parental Control 84 Parental Lock 84 Pairing 41 PAUSE MODE 71 Passcode 41 Passkey 41 PBC Playback 49 PIN 41 PICTURE NAVI 30, 44 PLAY LIST 37 Play Timer xx Playback Control (PBC) 84 Playing a CD/tape xx Program Play 31 PROGRESSIVE AUTO 20 Progressive format 19, 84 PROGRESSIVE VIDEO 20 THEATRE SYNC 53 TIME/TEXT 29 Timer xx TITLE 29 Title 84 TRACK 29 Track 85 TRACK SELECTION 71 Troubleshooting 77 TV Hookup 18 TV TYPE 69 R X Radio 51 Radio Stations 50 Rear Panel 87 Region Code 7, 8
Additional Information 91GB CMT-DH7BT.GB.
Printed in China CMT-DH7BT.GB.