Owner's manual

ManualsBrandsSony ManualsTelevisionsKV-29XL71K

Menu System 13

Introducing and Using the Menu System

Level 1 Level 2 Level 3 / Function

MANUAL PROGRAMME PRESET

The “Manual Programme Preset” option in the “Set Up”

menu allows you to:

a) Preset channels or the VCR channel one by one to the

programme order of your choice.

To do this:

1 After selecting the ”Manual Programme Preset” option,

press the b button then with Programme option

highlighted press the b button.

Press the v or V buttons to select which programme

number you want to preset the channel to (for VCR,

select programme number “0”). Then press the B

button.

2 The availability of this option depends on the country you have selected in the “Language/Country” menu.

After selecting the System option, press the

b button. Then press the v or V buttons to select the TV Broadcast

system (B/G for western European countries or D/K for eastern European countries). Press the B button.

3 After selecting the Channel option, press the

b button. Then press the v or V buttons to select the channel tuning

(“C” for terrestrial channels or “S” for cable channels). Next press

b button. After that, press the numbered buttons to

directly enter the channel number of the TV Broadcast or the VCR channel. If you do not know the channel number,

press the v or

V buttons to search for it. When you have tuned to the desired channel, press the OK button twice to

store.

Repeat all the above steps to tune and store more channels.

b) Label a channel using up to five characters.

To do this: After highlighting the Programme option, press the PROG +/- button to select the programme number of

the channel you wish to name. When the programme you want to name appears on the screen, select the Label option

and press

b button. Next press the v or V buttons to select a letter, number or “-“ for a blank. Press the b button to

confirm thecharacter. Select the other four characters in the same way. After selecting all the characters, press the

OK button twice to store.

c) Manually fine tune the TV to obtain a better picture reception if the picture is distorted.

Normally the automatic fine tuning (AFT) is in operation, but you can alter it manually.

To do this: Whilst watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press

button. Next press the v or

V buttons to adjust the fine tuning between -15 and +15. Finally press the OK button twice

to store.

d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.

To do this: After highlighting the Programme option, press the PROG +/- button to select the programme number

you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press the

b button. Next press the v or

V buttons to select Yes. Finally press the OK button twice to confirm and store.

To cancel this function afterwards, select “No” instead of “Yes” in the step above.

e) View and record scrambled channels when using a decoder connected directly to the Scart socket 3/ 3 or

through a VCR.

The availability of this option depends on the country you have selected in the “Language/Country” menu.

To do this: Select the Decoder option and press the b button. Next press the v or

V buttons to select On. Finally

press the OK button twice to confirm and store.

To cancel this function afterwards, select “Off” instead of “On” in the step above.

Set Up

Language/Country

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset