Help Guide Wireless Speaker LF-S50G Use this Help Guide when you have any questions on how to use your Wireless Speaker.
Listening to music from the connected Bluetooth device Controlling the volume of the speaker Other useful functions Preventing unintentional activities (HOLD) Changing brightness of the clock display (DIMMER) Switching the clock display (12 hour/24 hour) Temporarily disable the capability to detect voice commands (Microphone off) Additional information Cleaning Exterior surfaces Speaker grill Notes on use Precautions Notes on water resistant feature Customer support website Troubleshooting When you hav
Bluetooth What do I do when pairing (device registration) fails? What do I do when the One-touch connection (NFC) does not work? LED What do I do when the Bluetooth LED is flashing in white? What do I do when the Bluetooth LED is flashing in red? When you find the speaker not working properly: 4-727-170-11(4) Copyright 2017 Sony Corporation 3
Help Guide Wireless Speaker LF-S50G Locating parts and controls 1. Gesture LED 2. Status LEDs (for Google Assistant) 3. Clock display (*1)/Volume display (*2) 4. Built-in microphones 5. Gesture control sensor 6. Bluetooth LED 7. N-mark (*3) 8. 9. (microphone off) button (Bluetooth)/PAIRING button 10. DIMMER/RESTART button (*4) 11. HOLD button (*5) 12. DC IN connector *1 *2 The upper two digits indicate time in hours and the lower two digits indicate time in minutes.
Help Guide Wireless Speaker LF-S50G LED indications Your wireless speaker has the following LEDs. LED 1. Gesture LED 2. Status LEDs 3. Bluetooth LED Entirely lights in white (for gesture indication). Entirely lights in white (for volume indication). Description A touch-free gesture is detected by the speaker. The speaker volume is set to 100%. The lit area of the LED shifts as the volume increases or decreases. All four LEDs light in white. A voice command is detected by the speaker.
Help Guide Wireless Speaker LF-S50G About software update The software of your wireless speaker will be automatically updated to the latest software while the speaker is connected to the Internet via a Wi-Fi network. For the latest information about software updates, visit the Support by Sony website at sony.net/SBS. It is recommended that you install the Support by Sony app on your smartphone/iPhone.
Help Guide Wireless Speaker LF-S50G Connecting to a power source Use the supplied AC adaptor to connect your wireless speaker to a power source. 1 Plug the one end of the AC adaptor to the DC IN connector on the bottom of the speaker. 2 Plug the other end to an AC outlet.
Help Guide Wireless Speaker LF-S50G Installing the dedicated app and making the initial settings To use Google Assistant with your wireless speaker, you first need to install the Google Home app on your smartphone/iPhone and make the initial settings for the speaker. Note Depending on the service you subscribe to, you may have to create an account in addition to a Google account in advance. 1 Access Google Play or App Store from the smartphone/iPhone.
4-727-170-11(4) Copyright 2017 Sony Corporation 9
Help Guide Wireless Speaker LF-S50G Talking to your Google Assistant You can use a wide variety of voice commands to control the operation of your wireless speaker in conjunction with Google Assistant. Just say a voice command to the speaker. Then, the speaker will perform the Google Assistant activity associated with the voice command. Hint For some of the available voice commands, refer to the supplied conversation leaflet “Voice Commands.
Help Guide Wireless Speaker LF-S50G Gesturing for the speaker what to do You can perform touch-free hand gestures over the gesture control sensor of your wireless speaker to control the operation of the speaker, including volume control. For more information about volume control, see Controlling the volume of the speaker. To initiate Google Assistant Pass your hand over the gesture control sensor from far to near side. This gesture is equivalent to saying “Ok Google” to the speaker.
To play the next song Pass your hand over the gesture control sensor from left to right.
Help Guide Wireless Speaker LF-S50G Pairing and connecting with a Bluetooth device You can pair and connect your wireless speaker with a BLUETOOTH® device and use the speaker as an external speaker for the connected device. Pairing is the process required to mutually register the information on Bluetooth devices to be connected wirelessly. It is necessary to pair the speaker with a Bluetooth device in order to establish a Bluetooth connection for the first time.
The speaker goes out of Bluetooth paring mode in about 3 minutes and the Bluetooth LED goes out. However, if the speaker fails to store the pairing information, it will not go out of Bluetooth pairing mode. If the speaker goes out of Bluetooth pairing mode before you complete the above procedure, repeat the procedure again. Once the speaker is paired with the Bluetooth device, there is no need to pair them again, except in the following cases: Pairing information is deleted due to repair work, etc.
Help Guide Wireless Speaker LF-S50G Pairing and connecting with a PC Pairing is the process required to mutually register the information on Bluetooth devices (including PCs) to be connected wirelessly. It is necessary to pair your wireless speaker with a computer in order to establish a Bluetooth connection for the first time. Perform the following procedure for each device. Before operating the speaker, be sure to do the following: Make sure that the computer has the Bluetooth function.
1. Click the [Start] button and then [Devices and Printers]. 2 After establishing a Wi-Fi connection, press and hold the speaker into Bluetooth pairing mode. 3 Search for the speaker on the computer. (Bluetooth)/PAIRING button to place the On Windows 10: 1. Select [Connect] from (Action Center) at the bottom right of the screen. 2. Select the name of the speaker. If the speaker's name does not appear, repeat the procedure from step 2.
When pairing completes, the Bluetooth connection is automatically established and “Connected music” will be displayed under the speaker's name. On Windows 8.1 or Windows 7: 1. Click [Add a device]. Windows 8.1: Windows 7: 2. Select the name of the speaker and click [Next]. Windows 8.
If passkey* entry is prompted, enter “0000.” If the speaker's name does not appear, perform the operation again from step 2. * A passkey may also be called “Passcode,” “PIN code,” “PIN number,” or “Password.” 3. When the following window appears, click [Close]. The computer begins installing the driver. Windows 8.1: Windows 7: 4 Register the speaker with the computer. On Windows 10: 1.
On Windows 8.1: 1. Right-click the name of the speaker in “Devices” and select [Sound settings] from the menu. 2. Confirm the speaker's name is on the “Sound” window. If there is a checkmark (green) beside the speaker's name, proceed to step 5. If there is no checkmark (green) beside the speaker's name, proceed to the next step (substep 3). If the speaker's name does not appear, right-click on the “Sound” window, and select [Show Disabled Devices] from the menu. Then proceed to the next step (substep 3).
3. Right-click the speaker's name, and select [Connect] from the menu. When the speaker is connected, a checkmark (green) will appear beside the speaker's name on the “Sound” window. Proceed to step 5. If [Connect] is grayed out, select [Disable] for [Default Device] that currently has a checkmark (green) beside it.
On Windows 7: 1. Double-click the name of the speaker in “Devices.” 2. Click [Listen to Music]. When the speaker is connected, a checkmark (green) will appear.
5 Establish a Bluetooth connection from the PC. You can enjoy playing music stored on your computer. Hint The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the computer. You can pair and connect with another Bluetooth device even when a Bluetooth connection is established. In such a case, the previous connection will be disconnected.
Help Guide Wireless Speaker LF-S50G Connecting with an NFC-compatible device by One-touch (NFC) When you touch an NFC-compatible device, such as a smartphone, to your wireless speaker, the speaker automatically pairs and connects with the NFC-compatible device. Compatible smartphones NFC-compatible smartphones with Android 4.1 or later NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags.
Keep the NFC-compatible device touched on the N-mark symbol on the speaker and slowly move the device back and forth and around. If the NFC-compatible device is in a case, remove the case. If the speaker is connected with another device (NFC-compatible headset, etc.) via a Bluetooth connection, touching the NFCcompatible device to the speaker disconnects the connection and establishes a Bluetooth connection with the speaker (Onetouch connection switching).
Help Guide Wireless Speaker LF-S50G Listening to music from the connected Bluetooth device While a Bluetooth connection is established between your wireless speaker and a Bluetooth device, you can listen to music from the Bluetooth device through the speaker. 1 On the Bluetooth device, make sure that a Bluetooth connection is established with the speaker. 2 Start playing music on the Bluetooth device.
Help Guide Wireless Speaker LF-S50G Controlling the volume of the speaker You can control the volume of your wireless speaker with touch-free hand gestures. Depending on the connected Bluetooth device, you can also use voice commands or the Google Home app for volume control. 1. Circle your finger within this area. 2. Built-in microphones 3. The lit area of the LED shifts as the volume increases or decreases. 4. Indicates a volume level in the range from 0 to 100%.
To control the volume with voice commands Say any number from 0 to 100 and the word “%” (for example, “62%” as shown below) directly to the speaker. You can set the volume to your desired level. Hint For some of the available voice commands, refer to the supplied conversation leaflet “Voice Commands.” For the latest voice commands, visit one of the websites listed below. For customers in the USA: assistant.google.com/intl/en_us/ For customers in Canada: assistant.google.
Help Guide Wireless Speaker LF-S50G Preventing unintentional activities (HOLD) You can suspend all the sensor and button activities of your wireless speaker for 3 minutes by pressing and holding the HOLD button ( ) on the bottom of the speaker for 3 seconds or longer. To forcefully resume the activities, press and hold the HOLD button once again for 3 seconds or longer.
Help Guide Wireless Speaker LF-S50G Changing brightness of the clock display (DIMMER) You can change the brightness level of the clock display or turn off the display by pressing the DIMMER/RESTART button ( ) on the bottom of your wireless speaker. Each press changes the brightness level among High, Middle, Low, and Off.
Help Guide Wireless Speaker LF-S50G Switching the clock display (12 hour/24 hour) You can switch the clock display between the 12 hour format and the 24 hour format by pressing and holding the DIMMER/RESTART button ( ) on the bottom of your wireless speaker.
Help Guide Wireless Speaker LF-S50G Temporarily disable the capability to detect voice commands (Microphone off) You can turn off the built-in microphones to temporarily disable the capability to detect voice commands by pressing the (microphone off) button. To enable the capability, press the (microphone off) button once again.
Help Guide Wireless Speaker LF-S50G Exterior surfaces Keep the exterior surfaces of your wireless speaker clean. When you find the exterior surfaces soiled, follow the procedures below for cleaning. 1 Unplug the AC adaptor from the speaker. 2 Dip a clean, soft cloth in (lukewarm) water, wring out the cloth, and then wipe the exterior surfaces gently with the cloth.
Help Guide Wireless Speaker LF-S50G Speaker grill Keep the speaker grill of your wireless speaker clean. When you find the speaker grill lightly soiled, you can remove the grill from the speaker and wash it. 1 Unplug the AC adaptor from the speaker. 2 Rotate the speaker grill counterclockwise until it clicks, and then remove the grill from the speaker. 3 Put the speaker grill directly under running tap water to wash away the soil. 4 Let the speaker grill dry out.
Note When the speaker grill is removed from the speaker, the speaker does not satisfy the IPX3 water resistant specifications. If the speaker grill is heavily soiled, the soil may not be completely washed away. Do not use soapy water or hot water for cleaning to avoid damage to the speaker grill. Do not scrub the speaker grill while washing away the soil. Exerting excessive force may cause damage to the speaker grill.
Help Guide Wireless Speaker LF-S50G Precautions On safety The nameplate and important information concerning safety are located at the bottom of the main unit and on the surface of the AC adaptor. Before operating the unit, be sure that the operating voltage of the unit is identical with that of your local power supply. Where purchased Operating voltage All countries/regions 100 V – 240 V AC, 50 Hz/60 Hz Notes on the AC adaptor Use only the supplied AC adaptor.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Other trademarks and trade names are those of their respective owners.
Help Guide Wireless Speaker LF-S50G Notes on water resistant feature Water resistant performance of the unit This unit has a water resistant specification (*1) of IPX3 (*2) as specified in “Degrees of protection against ingress of water” of the IEC60529 “Ingress Protection Rating (IP Code).” However, this unit is not completely water-tight. Do not drop the unit into water or purposely use it in water. *1 *2 The supplied accessories are not water resistant.
Help Guide Wireless Speaker LF-S50G Customer support website When you need support assistance, visit one of the customer support websites listed below. For customers in the USA: http://esupport.sony.com/US/ For customers in Canada: http://esupport.sony.com/CA/ For customers in European countries: http://www.sony.eu/support For customers in other countries/regions: http://www.sony-asia.
Help Guide Wireless Speaker LF-S50G When you have an issue: Do the following before you request a repair service. Read the relevant instruction and troubleshooting topics in this Help Guide. Press the DIMMER/RESTART button on your wireless speaker. Initialize your wireless speaker. All the settings, including the volume setting, are cleared and the pairing (device registration) information is deleted. Visit our customer support home page. If the none of the above works, consult your nearest Sony dealer.
Help Guide Wireless Speaker LF-S50G What do I do when the speaker is off-powered? Make sure that the AC adaptor is firmly plugged to your wireless speaker and an AC outlet. Press the DIMMER/RESTART button ( ) on the bottom of your wireless speaker.
Help Guide Wireless Speaker LF-S50G What do I do when the speaker is not responding to any gestures? Bring your hand closer to the gesture control sensor. Turn off the peripheral devices. Your wireless speaker may be in the HOLD state. Press and hold the HOLD button on the bottom of the speaker for 3 seconds or longer.
Help Guide Wireless Speaker LF-S50G What do I do when the speaker is not responding to the “Ok Google” command? Depending on the location of your wireless speaker, the ambient conditions may prevent the speaker from detecting the voice command “Ok Google.” Avoid placing the speaker in a noisy place or a place that is exposed to strong winds or echoes (sound reflections). Make sure that the built-in microphones are not blocked.
Help Guide Wireless Speaker LF-S50G What do I do when the speaker is not responding to any voice commands? Make sure that your wireless speaker is connected to your network. Depending on the location of your wireless speaker, the ambient conditions may prevent the speaker from detecting the voice command. Avoid placing the speaker in a noisy place or a place that is exposed to strong winds or echoes (sound reflections). Make sure that the built-in microphones are not blocked.
Help Guide Wireless Speaker LF-S50G What do I do when I hear no music from the connected Bluetooth device through the speaker or the output sound crackles/distorts/interrupts? Check the volume of your wireless speaker and the connected Bluetooth device. Make sure that playback is in progress on the connected Bluetooth device. Make sure that a Bluetooth connection is established between your wireless speaker and the Bluetooth device.
Help Guide Wireless Speaker LF-S50G What do I do when the speaker fails to connect to my network? Make sure that your smartphone/iPhone is connected to a Wi-Fi network. For detailed instructions, refer to the operating instructions supplied with the smartphone/iPhone. Make sure that your wireless speaker is connected to the same wireless LAN as your smartphone/iPhone. For detailed instructions, refer to the operating instructions supplied with the smartphone/iPhone.
Help Guide Wireless Speaker LF-S50G What do I do when the output music interrupts? The wireless communication is interfered. If a microwave oven is in use, stop its use.
Help Guide Wireless Speaker LF-S50G What do I do when pairing (device registration) fails? Make sure that your wireless speaker is connected to your network. Bring the Bluetooth device to your wireless speaker closer than 1 m (3 ft.). You may have initialized your wireless speaker. Initializing the speaker may cause the speaker to fail to establish a Bluetooth connection with a Bluetooth device.
Help Guide Wireless Speaker LF-S50G What do I do when the One-touch connection (NFC) does not work? Make sure that your wireless speaker is connected to your network. The screen of the NFC-compatible device may be locked. Unlock the screen before you touch the device to your wireless speaker. For detailed instructions, refer to the operating instructions supplied with the NFC-compatible device. Keep the NFC-compatible device touched on the N-mark symbol on your wireless speaker until the device vibrates.
Help Guide Wireless Speaker LF-S50G What do I do when the Bluetooth LED is flashing in white? The software of your wireless speaker has been updated. Wait until the Bluetooth LED stops flashing.
Help Guide Wireless Speaker LF-S50G What do I do when the Bluetooth LED is flashing in red? Your wireless speaker has an error. Initialize the speaker.
Help Guide Wireless Speaker LF-S50G When you find the speaker not working properly: Unplug the AC adaptor from your wireless speaker and plug it back again. If this does not solve the issue, try initializing the speaker. Press and hold the (microphone off) button until all four of the status LEDs light and flash in orange.
