Manual

Specifications
System
Disc
Laser
Laser output
Laser diode properties
Revolutions (CLV)
Error correction
Sampling frequency
Coding
Modulation system
Number of channels
Frequency response
Signal-to-noise ratio
Wow and flutter
General
Power requirements
digital audio system Where purchased Power requirements
MJniDisc
Continental Europe 220- 230 Y AC, 50/60 Hz
Semiconductor laser (X - 780 run)
Emission duratiom continuous UK 220- 230 V AC, 50160 Hz
Less than 44-6 VW* US and Canada 120 V AC, 60 Hz
* This output is the value measured at a
distance of 200 ram from the objective
lens sudace on the Optical Pick-up Power €omumption
Block with 7 mm aperture.
Material: GaAIAs Where purchased Power consumption
400 r/m to 900 rim Continental Europe 20 W
Advanced Cro_ Interleave Reed UK 20 W
Solomon Code (ACIRC)
44.1 kI-lz US and Canada 19 W
Adaptive Transform Acoustic Coding
(ATRAC) Dimensions (approx.) (w/h/d) ind. projecting pure
280 x 90 x 285 mm
EFM (Eight-to-Fourteen Modulation) (11 l/,x 3 5/ex 11 t/., in.)
2 stereo channels Mass (approx.) 2.8kg (6 Fos 2 oz)
5 to 20,000 Hz _-0.3 dB
Over 96 dB during playback Suppliedaccessories
Below measurable limit Audio connecting cords (2)
Optical cable (1)
Inputs
Jacktype Input Rated Minimum
impedance input input
LiNE Phono 47kilohms 500mVrms 125mVrms
(ANALOG) IN jacks
DIGITAL IN Square Optical
optical wave __ __
connector length:
jack 660 nm
Outputs
Jack type Rated output Load impedance
PHONES Stereo 10 mW 32 ohms
m_jack
LINE Phono 2 Vrms Over 10 kilo1"ums
(ANALOG) jacks (at 50 kilohms)
OUT
DIGITAL Square -18 dBm Optical wave
OUT optical length: 660 nm
connector
jack
Optional accessories
Optical cable: FOC-15A
Recordable MDs: MDW-60 (60 rain), MDW-74 (74 mln)
US and foreign patents Ecensed from Dolby Laboratories
Licensing Corporation.
Design and specifications are subject to change without
notice.
33eN