3-867-294-31 (1) FM/AM MiniDisc Player Operating Instructions GB Manual de instrucciones ES ¤ˇ¥˛»¡'œfi CT For installation and connections, see the supplied installation/connections manual. Para obtener información sobre la instalación y las conexiones, consulte el manual de instalación/conexiones suministrado.
Welcome ! Thank you for purchasing the Sony MiniDisc Player. This unit lets you enjoy a variety of features as well as a supplied rotary commander and an optional wireless remote. In addition to the MD playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc*2.
Table of Contents This Unit Only With Optional Equipment Notes on MDs .......................................................... 4 Location of controls ................................................. 5 Getting Started Resetting the unit ................................................ Detaching the front panel .................................. Preparing the rotary commander ..................... Setting the clock ..................................................
Notes on MDs Since an MD itself is housed in a cartridge, free from accidental contact with your fingers and dust etc., it can withstand a certain degree of the rough handling. However, dirt or dust on the surface of the cartridge or a warped cartridge may cause a malfunction quality, observe the following. Notes on mounting labels Be sure to mount labels on cartridges correctly, as failing to do so may cause an MD to become stuck in the unit. •Mount the label in a suitable position.
Location of controls OPEN SOUND MODE DSPL LIST OFF 1 2 3 SOURCE OFF D - BASS SHIFT SEEK/AMS 1 2 3 4 5 6 7 8 9 10 MDX-C7970 Refer to the pages for details.
Location of controls Optional wireless remote (RM-X47) OFF MODE SOURCE DIR SEEK AMS – REW – PRESET DISC SOUND + FF + SEL ATT DSPL The corresponding buttons of the wireless remote control the same functions as those on this unit. 1 OFF button 6 DSPL button 2 SEEK/AMS button 7 PRESET/DISC button 3 (–) (+) buttons 6 You cannot perform manual search or manual tuning with the wireless remote.
Attaching the front panel Getting Started Place the hole a in the front panel onto the spindle b on the unit as illustrated, then push the left side in. Resetting the unit a b Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen. µ Reset button Note Pressing the reset button will erase the clock setting and some memorised functions.
Preparing the rotary commander Setting the clock When you mount the rotary commander, attach the label in the illustration below. Example: To set the clock to 10:08 The clock uses a 12-hour digital indication. 1 SOUND MODE LIST Press (SHIFT), then press (3) (SET UP) repeatedly until “Clock” appears. 1 Press (5) (n). The hour indication flashes. 2 Set the hour. LIST MODE SOUND to go backward to go forward 3 Press (5) (n). The minute indication flashes. 4 Set the minute.
Changing the display item Each time you press (DSPL), the item changes as follows: MD Player Listening to an MD 1 Press (OPEN) and insert the MD. Labelled side up $ Track number/ Elapsed playback time $ Disc name*1 $ Track name*2 $ Clock 6 *1 If there is no prerecorded title for a disc “NO D.Name” will appear on the display. *2 If a track title is not prerecorded, “NO T.Name” will be displayed. If an MD is already inserted, press (SOURCE) repeatedly until “MD” appears.
1 During playback, press (SHIFT). 2 Press (3) (SET UP) repeatedly until “A.Scrl” appears. 3 Press (5) (n) to select “A.Scrl on.” 4 Press (SHIFT). Playing an MD in various modes You can play MDs in various modes: •Repeat (Repeat Play) repeats the current track. •Shuf (Shuffle Play) plays all the tracks in random order. To cancel Auto Scroll, select “A.Scrl off” in step 3 above.
Memorising only the desired stations Radio Memorising stations automatically You can preset up to 20 FM stations (10 each for FM1 and FM2), up to 10 AM stations in the order of your choice. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (MODE) repeatedly to select the band. 3 Push the SEEK/AMS control up or down to tune in the station that you want to store on the number button. 4 Press and hold the desired number button ((1) to (10)) until “MEM” appears.
If you cannot tune in a preset station Push the SEEK/AMS control up or down and release to search for the station (automatic tuning). Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (SHIFT), then press (4) (PLAY MODE) repeatedly until “Local” (local seek mode) is displayed. Then press (5) (n) to select “Local on.” Press (SHIFT).
Displaying the station name Press (DSPL) during radio reception. Locating a station by name — List-up 1 Press (LIST) momentarily. The name assigned to the station currently playing appears in the display. 2 Press (LIST) repeatedly until you find the desired station. 3 Press (6) (ENTER) to tune in the desired station.
By rotating the control (the SEEK/AMS control) Other Functions Using the rotary commander The rotary commander works by pressing buttons and/or rotating controls. You can also control optional CD or MD units with the rotary commander. By pressing buttons (the SOURCE and MODE buttons) Rotate the control and release it to: •Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback. •Tune in stations automatically.
Changing the operative direction The operative direction of controls is factoryset as shown below. To increase Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. To decrease 1 If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.
The following items can be set: •Clock (page 8) •D.Info (Dual Information) to display the clock and the play mode at the same time (on) or to display the information alternately (off). •Amber/Green to change the illumination color to amber or green. •Dimmer to change the brightness of the display. — Select “on” to dim the display. •Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit’s installed position. •Beep to turn on or off the beeps.
With Optional Equipment CD/MD Unit This unit can control a maximum of seven external CD/MD units in this configuration: CD unit – maximum of five MD unit – maximum of five. Any combination up to seven will work. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. Playing a CD or MD 1 Press (SOURCE) repeatedly to select CD or MD. 2 Press (MODE) until the desired unit appears. CD/MD playback starts.
1 During playback, press(SHIFT). 2 Press (3) (SET UP) repeatedly until “A.Scrl” appears. Playing tracks repeatedly — Repeat Play 3 Press (5) (n) to select “A.Scrl on.” You can select: •Repeat 1 to repeat a track. •Repeat 2 to repeat a disc. 4 Press (SHIFT). 1 During playback, press(SHIFT). 2 Press (7) (REP) repeatedly until the desired setting appears. To cancel Auto Scroll, select “A.Scrl off” in step 3 above.
Labelling a CD — Disc Memo Displaying the disc memo Press (DSPL) during CD or CD TEXT disc playback. (For a CD unit with the custom file function) You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name and select the specific tracks for playback (page 20). 1 2 Play the CD and press(LIST) for two seconds. $ Track number/ Elapsed playback time $ Disc memo name Enter the characters.
Locating a disc by name — List-up (For a CD unit with the custom file function or an MD unit) You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labelling a CD” (page 19). 1 Press (LIST). The name assigned to the current disc appears in the display. Selecting specific tracks for playback — Bank (For a CD unit with the custom file function) If you label the disc, you can set the unit to skip or play the tracks of your choice.
Playing specific tracks only You can select: •Bank on to play the tracks with the “Play” setting. •Bank inv (Inverse) to play the tracks with the “Skip” setting. 1 2 During playback, press(SHIFT), then press (4) (PLAY MODE) repeatedly until “Bank” appears. Press (5) (n ) repeatedly until the desired setting appears. z Bank on z Bank inv Bank off Z Playback starts from the track following the current one. 3 Press (SHIFT). To return to normal playing mode, select “Bank off” in step 2 above.
Maintenance Dismounting the unit Fuse replacement 1 Press the clip inside the front cover with a thin screwdriver, and gently pry the front cover free. 2 Repeat step 1 on the left side. The front cover is removed. 3 Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting. 4 Repeat step 3 on the right side. 5 Slide the unit out of the mounting.
Specifications MD player section Signal-to-noise ratio Frequency response Wow and flutter 90 dB 10 – 20,000 Hz Below measurable limit General Outputs Tuner section FM Tuning range FM tuning interval: 50 kHz/200 kHz switchable 87.5 – 108.0 MHz (at 50 kHz step) 87.5 – 107.9 MHz (at 200 kHz step) Aerial terminal External aerial connector Intermediate frequency 10.7 MHz Usable sensitivity 9 dBf Selectivity 75 dB at 400 kHz Signal-to-noise ratio 65 dB (stereo), 68 dB (mono) Harmonic distortion at 1 kHz 0.
Troubleshooting guide The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Problem Cause/Solution No sound •Cancel the ATT function. •Set the fader control to the centre position for two-speaker systems. •Rotate the dial in a clockwise direction to adjust the volume. The contents of the memory have been erased. • The power cord or battery has been disconnected.
Error displays (when optional CD/MD unit is connected) The following indications will flash for about five seconds, and an alarm sound will be heard. Display NO Mag NO Disc NG Discs *1 Error Blank* 1 Push Reset Not Ready Cause Solution The disc magazine is not inserted in the CD/MD unit. Insert the disc magazine in the CD/ MD unit. No disc is inserted in the CD/MD unit. Insert discs in the CD/MD unit. A CD/MD cannot play because of some problem. Insert another CD/MD.
¡Bienvenido! Muchas gracias por la adquisición de este reproductor de minidiscos Sony. Esta unidad le permitirá disfrutar de distintas funciones, así como de un mando rotativo suministrado y de un mando a distancia inalámbrico opcional. Además de las operaciones de reproducción de MD o de recepción de emisoras, es posible ampliar el sistema conectando una unidad de CD/MD opcional*1.
Indice Sólo esta unidad Equipo opcional Notas sobre los MD ................................................. 4 Localización de los controles ................................. 5 Procedimientos iniciales Restauración de la unidad ................................. Extracción del panel frontal ............................... Preparación del mando rotativo ....................... Ajuste del reloj ..................................................... 7 7 8 8 Reproductor de MD Reproducción de MD .............
Notas sobre los MD Puesto que el MD se encuentra alojado en un cartucho, que lo protege del contacto accidental con los dedos y el polvo, etc., dicho MD puede resistir hasta cierto grado tratos bruscos. Sin embargo, la existencia de suciedad o polvo en la superficie del cartucho o la deformación del mismo pueden causar fallos de funcionamiento. Para disfrutar de una calidad de sonido óptima, observe lo siguiente.
Localización de los controles OPEN SOUND MODE DSPL LIST OFF 1 2 3 SOURCE OFF D - BASS SHIFT SEEK/AMS 1 2 3 4 5 6 7 8 9 10 MDX-C7970 Consulte las páginas indicadas para obtener más información.
Localización de los controles Control remoto inalámbrico opcional (RM-X47) OFF MODE SOURCE DIR SEEK AMS – – + PRESET DISC REW FF SOUND + SEL ATT DSPL Botones del control remoto inalámbrico con la misma función que los de esta unidad. 1 Botón OFF 6 Botón DSPL 2 Botón SEEK/AMS 7 Botón PRESET/DISC 3 Botones (–) (+) 6 No es posible realizar la búsqueda manual ni la sintonización manual con el control remoto.
Procedimientos iniciales Restauración de la unidad Antes de utilizar la unidad por primera vez o después de sustituir la batería del automóvil, es necesario restaurar dicha unidad. Extraiga el panel frontal y presione el botón de restauración con un objeto puntiagudo, por ejemplo, un bolígrafo. Fijación del panel frontal Coloque el orificio a del panel sobre el eje b de la unidad como muestra la ilustración y, a continuación, ejerza presión sobre el lado izquierdo para fijarlo.
Preparación del mando rotativo Cuando monte el mando rotativo, adhiera la etiqueta en la posición indicada en la siguiente ilustración. Ajuste del reloj El reloj dispone de una indicación digital de 12 horas. Ejemplo: Para ajustar el reloj a las 10:08 1 SOUND MODE LIST Presione (SHIFT) y, a continuación, (3) (SET UP) varias veces hasta que aparezca “Clock”. 1 Presione (5) (n). Los dígitos de la hora parpadean. 2 Ajuste la hora. LIST MODE SOUND para retroceder para avanzar 3 Presione (5) (n).
Cambio de la indicación del visor Reproductor de MD Cada vez que presione (DSPL), los elementos cambiarán de la siguiente forma: $ Número de tema/ Tiempo de reproducción transcurrido Reproducción de MD 1 Presione (OPEN) e inserte un MD. Con el lado de la etiqueta hacia arriba $ Título del disco*1 $ Título del tema*2 $ Reloj 6 *1 Si no se ha grabado previamente un título para un disco, aparecerá “NO D.Name” en el visor. *2 Si no se ha grabado previamente un título de tema, aparecerá “NO T.
1 Durante la reproducción, presione (SHIFT). 2 Presione (3) (SET UP) varias veces hasta que aparezca “A.Scrl”. 3 Presione (5) (n) para seleccionar “A.Scrl on”. 4 Pulse (SHIFT). Para cancelar la función de desplazamiento automático, seleccione “A.Scrl off” en el paso 3 anterior. Reproducción de MD en diversos modos Es posible reproducir minidiscos en los siguientes modos: •Repeat (Reproducción repetida), que permite repetir el tema actual.
Memorización de las emisoras deseadas Radio Memorización automática de emisoras Es posible almacenar un máximo de 20 emisoras de FM (10 de FM1 y 10 de FM2) y 10 de AM en el orden en que desee. 1 Presione (SOURCE) varias veces para seleccionar el sintonizador. 2 Presione (MODE) varias veces para seleccionar la banda. 3 Desplace el control SEEK/AMS hacia arriba o abajo para sintonizar la emisora que desee almacenar en el botón numérico.
Si no puede sintonizar una emisora programada Desplace el control SEEK/AMS hacia arriba o abajo y suéltelo para buscar la emisora (sintonización automática). La exploración se detiene cuando la unidad recibe una emisora. Desplace el control SEEK/AMS hacia arriba o abajo varias veces hasta recibir la emisora que desee.
Visualización del nombre de la emisora Presione (DSPL) durante la recepción de una emisora. Localización de una emisora por su nombre — Functión de listado 1 Presione (LIST) durante un instante. El nombre asignado a la emisora actualmente recibida aparecerá en el visor. 2 Presione repetidamente (LIST) hasta encontrar la emisora deseada. 3 Presione (6) (ENTER) para sintonizar la emisora deseada.
Mediante el giro del control SEEK/AMS Otras funciones Uso del mando rotativo Este mando funciona mediante la presión de botones y/o el giro de controles. También es posible controlar unidades opcionales de CD o MD con el mando rotativo. Mediante la presión de botones SOURCE y MODE (SOURCE) (MODE) Gire el control y suéltelo para: • Localizar un tema específico de un disco.
Cambio de la dirección de funcionamiento La dirección de funcionamiento de los controles se ha ajustado en fábrica como se indica en la siguiente ilustración. Para aumentar Ajuste de las características de sonido Es posible ajustar los graves, los agudos, el balance y el equilibrio entre altavoces e, igualmente, almacenar para cada fuente un nivel de graves y agudos de forma independiente.
Es posible ajustar los siguientes elementos: •Clock (Reloj) (página 8) •D. Info (Información dual) que permite mostrar simultáneamente el reloj y el modo de reproducción (on) o la información de forma alternativa (off). •Amber/Green que permite cambiar el color de iluminación entre ámbar o verde. •Dimmer (Atenuador) que permite cambiar el brillo del visor. — Seleccione “on” para atenuar el brillo del visor.
Equipo opcional Unidad de CD/MD Es posible controlar un máximo de siete unidades externas de CD/MD con esta unidad, con la siguiente configuración: Unidades de CD – máximo de cinco Unidades de MD – máximo de cinco. Cualquier combinación de hasta siete unidades funcionará. Si conecta una unidad opcional de CD con la función CD TEXT, el visor mostrará la información CD TEXT al reproducir discos CD TEXT.
1 Presione (SHIFT) durante la reproducción. 2 Presione (3) (SET UP) varias veces hasta que aparezca “A.Scrl”. 3 Presione (5) (n) para seleccionar “A.Scrl on”. Es posible seleccionar: •Repeat 1 para repetir un tema. •Repeat 2 para repetir un disco. 4 Pulse (SHIFT). 1 Durante la reproducción, presione (SHIFT). 2 Presione (7) (REP) varias veces hasta que aparezca el ajuste que desee. Para cancelar la función de desplazamiento automático, seleccione “A.Scrl off” en el paso 3 anterior.
Asignación de títulos a los discos compactos Visualización del memorando de discos Presione (DSPL) durante la reproducción de un CD o de un disco CD TEXT. — Memorando de discos (Unidad de CD con función de archivo personalizado) Es posible asignar un título personalizado a cada disco, utilizando un máximo de ocho caracteres para cada uno de éstos. La asignación de títulos permitirá localizar los discos por el nombre y seleccionar los temas específicos que se quieran reproducir (página 20).
Localización de discos mediante el nombre — Función de listado (unidad de CD con función de archivo personalizado o una unidad de MD) Esta función puede utilizarse con discos a los que se ha asignado un título personalizado. Para obtener más información sobre los títulos de disco, consulte “Asignación de títulos a los discos compactos” (página 19).
Reproducción sólo de temas específicos Es posible seleccionar: • Bank on para reproducir los temas con el ajuste “Play”. • Bank inv (Inverso) para reproducir los temas con el ajuste “Skip”. 1 Durante la reproducción, presione (SHIFT) y, a continuación, (4) (PLAY MODE) varias veces hasta que aparezca “Bank”. 2 Presione (5) (n) varias veces hasta que aparezca el ajuste que desee. z Bank on z Bank inv Bank off Z La reproducción se inicia a partir del tema siguiente al actual. 3 Presione (SHIFT).
Mantenimiento Desmontaje de la unidad Sustitución del fusible 1 Presione el clip del interior de la cubierta frontal con un destornillador fino, y libere dicha cubierta con suavidad. 2 Repita el paso 1 en el lado izquierdo. La cubierta frontal podrá extraerse. 3 Emplee un destornillador fino para presionar el clip de la parte izquierda de la unidad; a continuación, tire del lado izquierdo de la unidad hasta que el enganche salga del marco. 4 Repita el paso 3 en el lado derecho.
Especificaciones Sección del reproductor de minidiscos Relación señal-ruido Respuesta de frecuencia Fluctuación y trémolo 90 dB 10 – 20.
Guía de solución de problemas La siguiente lista de comprobaciones proporciona ayuda para solucionar la mayoría de los problemas que pueden producirse con la unidad. Antes de consultar la lista que aparece a continuación, compruebe los procedimientos de conexión y funcionamiento. Generales Problema Causa/Solución Ausencia de sonido •Cancele la función ATT. •Ajuste el control de equilibrio entre los altavoces en la posición central para sistemas de 2 altavoces.
Indicaciones de error (cuando se ha conectado una unidad de CD/MD opcional) Las siguientes indicaciones parpadearán durante cinco segundos aproximadamente y se oirá una alarma. Indicación Causa Solución No ha insertado el cargador de discos en la unidad de CD/MD. Inserte el cargador con discos en la unidad de CD/MD. No ha insertado ningún disco en la unidad de CD/MD. Inserte los discos en la unidad de CD/MD. El CD/MD no se reproduce debido a algún problema. Inserte otro CD/MD.
Sony Corporation Printed in Thailand