DSR 9500/9510 2.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page c DSR 9500AX / 9500AY / 9500AZ DSR 9510X / 9510Y / 9510Z Instructions for use REV. 1.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 1 SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY: AC 100-240V ~, 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 2 CONTENT Safety Instructions . . . . . . . . . . . . . General Features . . . . . . . . . . . . . . . Connecting Your STB . . . . . . . . . . . Description . . . . . . . . . . . . . . . . . . . Front Panel . . . . . . . . . . . . . . . . . . . Rear Panel . . . . . . . . . . . . . . . . . . . Remote Control Unit . . . . . . . . . . . . Basic Functions . . . . . . . . . . . . . . . . Operating The Receiver . . . . . . . . . Main Menu . . . . . . . . . . . . . . . .
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 3 GENERAL FEATURES 1. USER SECTION 4000 PROGRAMMABLE CHANNELS SOFTWARE DOWNLOAD VIA SATELLITE & PC(Secured) ADVANCED ELECTRONIC PROGRAM GUIDE MULTI LANGUAGE SUPPORTED FOR OSD SUBTITLE & TELETEXT(OSD & VBI)SUPPORTED WITH MULTI LANGUAGE DiSEqC 1.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 4 CONNECTING YOUR "STB" 1. LOCATION OF THE RECEIVER Your STB should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver. The location should be safely accessible by the cable from your antenna system. 2.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 5 CONNECTING YOUR "STB" 7. CONNECTING DIGITAL AUDIO SYSTEM Connect a fiber optic cable between Optical SPDIF on the receiver and Optical SPDIF on the Digital Audio System. 8. INSERTING SMARTCARDS FOR CAS SERVICES In order to view a scrambled service, you need to have the appropriate CAM (Conditional Access Module) and a valid smartcard. N o t e : Insert the Smartcard with the gold coloured chip facing downwards. 9.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 6 DESCRIPTION Front Panel 1 2 3 1. 4 5 6 7 This key is for turning the receiver on and Standby. 2. , These keys are for changing the channels. 3. , These keys are for increasing and decreasing the volume level manually. 4. 7 Segment Display This LED display will show the current channel number. While the receiver is in Standby mode, the display will show the current time. 5.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 7 DESCRIPTION Rear Panel 12 6 11 10 T E L L I T 7 5 9 4 8 3 2 1 1. AC MAINS This is to plug in the AC mains power cord. The input AC voltage range is 100V to 240V, 50Hz/60Hz supply. 2. LNB This port is to connect the coaxial cable from LNB of your dish. The IF input is provided through this port and the input frequency range is 950-2150 MHz. Also the voltage switching 13V and 18V is passed through this port. 3.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 8 DESCRIPTION Remote Control Unit POWER TV/RADIO 1 4 MUTE 2 5 FAV 6 EPG 7 3 timer 9 10 13 15 LAST MENU 8 12 11 14 EXIT CH+ 17 16 18 N o t e : When inserting batteries, make sure that the polarity(+/-) is correct. 1. POWER( ) This is for switching the receiver ON/STANDBY mode. 2. 0-9 Numerical keys ( ~ ) These keys are to enter numeric values and to select the channel directly by entering its number. 3.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 9 DESCRIPTION 6. FAV Use the key to switch between favorite lists. 7. EPG Electronic Program Guide button displays the TV/Radio Program guide. 8. LAST This key is for calling up directly whatever channel you were watching from the list. 9. TEXT(GREEN) ( ) This key is for selecting the subtitle mode. This button functions same as the GREEN button on the menu. Press once and subtitle appears. You can select the language you want using the channel +/- keys.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 10 BASIC FUNCTIONS 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 11 BASIC FUNCTION 3. Select Soundtrack Press YELLOW ( Press / and ● ● ) key to see the soundtrack list. key to select one. 4. Select Videotrack Press YELLOW ( Press / and ● ● ) key twice to see the videotrack list. key to select one. 5. Service List Press key to while you are viewing a program. Select list by pressing TV/RADIO or FAV key.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 12 BASIC FUNCTION 5.1 Service Favorites ● ● ● Press the GREEN ( the Favorites list. Press the GREEN ( list and channel list. Use the / , / you want. ) key on the control unit to select ) key to switch between favorite keys to select a favorite group that 5.2 Service Alphabetical ● ● ● Press the YELLOW ( ) key on the remote control unit to select the Alphabetical list. Press the YELLOW ( ) key to switch between alphabet list and channel list.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 13 BASIC FUNCTION 6. Program Information EPG-Electronic Program Guide The electronic program guide gives you imformation for the channels. Note : 1. This service depends on service provider. 2. After receiver recognized the GMT-time from the signal which takes few seconds, it can display correct EPG information. ● Press EPG key while you are viewing a program. This function is displayed on the screen by using only time.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 14 BASIC FUNCTION 8. Teletext OSD When the current broadcasting program provides Teletext OSD, press the GREEN ( ) key twice to see the current Teletext OSD list. To change the Teletext OSD: ● ● Use the / keys to select a Teletext OSD you want. Press the key and then the Teletext OSD you want is displayed on the screen. 9.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 15 OPERATING THE RECEIVER Main Menu After installing your antenna system and STB with appropriate connectors. ● ● Plug in the AC main power and switch on the receiver. Press MENU key to bring up the main menu. The LED display will show "MENU". The following on screen display will appear: The sub menu topics will be displayed. For the sub-menus 1, 2 and 3 you need the PIN Code.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 16 OPERATING THE RECEIVER 1.1 LNB Setting You can select the satellite and LNB setting conditions to execute channel search and you can alter the settings for 22KHz tone. The parameters set in this menu are needed for programming the channels for the "Auto scanning" and "Manual scanning". The necessary information can be found at your antenna and LNB brochures, or you can ask your dealer. ● ● ● ● Select LNB power supply "On". Select the desired satellite name.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 17 OPERATING THE RECEIVER 1.2.1 User Mode ● ● ● Select Driving Mode: You have an option to choose the positioner’s movement type: Continuous, Step or Time. Position the antenna with north, south, east and west and use the / , / key to drive motor. key drives to west, key drives to east, key drives to north and key drives to south. If you finished driving of motor, select “Store current Position.” and press key, to reset new driving motor.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 18 OPERATING THE RECEIVER 1.3 Solarsat Setting This menu is only for the Solarsat antenna. When you press this menu, you will get this message, “This menu is only for the Solarsat antenna. If you have one-press OK, otherwise-press EXIT.” You can set the value according to your location. ● ● ● To set the Value of Date and Time, use the change the value. Use the / keys to change position. Use the / keys to move each filed. / keys to 1.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 19 OPERATING THE RECEIVER 1.5 Manual Scanning To tune-in new channels and weak signals, the STB has been provided with the option "Manual Scanning" where the channel data can be entered by the user. After selecting the "5. Manual Scanning" from the Installation Menu, the following screen will be displayed: ● ● Select the target satellite for manual search. Load a transponder.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 20 OPERATING THE RECEIVER 1.6 SMATV Scanning In case that several generations use Antenna and LNB in common, search the service the from 950 to 2150MHz. ● ● ● Select Searching Type “Automatic” or “Manual”. Select Scan Mode “All” or “Only Free”. You can input alternative symbol rate from 1 to 4 Note : 1. When your searching type is set to Automatic during SMATV scanning, you have only to enter the alternative symbol rate(1~4) you want. 2.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 21 OPERATING THE RECEIVER 2. Channel Organising The "Channel Organising" menu has seven functions: This menu is for removing some channels from channel list which are related wth designated Satellite or Transponder. And it provides making favorite list and moving channel position as you want. ● Enter the PIN Code. If you have not entered your own PIN Code 0000 applies, which was set at the factory. 2.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 22 OPERATING THE RECEIVER 2.4 Delete All Channel At the request window, press press MENU / EXIT to exit. key to delete all channels and 2.5 Delete Scrambled Channels At the request window, press key to delete scrambled channels and press MENU / EXIT to exit. 2.6 Favorite Channel You can immediately register the present channel to the desired Favorite Group. In addition, you can register a channel to multiple favorite groups.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 23 OPERATING THE RECEIVER 2.7 Move & Edit Channel Select the TV/RADIO list with / keys. ● Select the TV/RADIO list with / or PG-/PG+ keys. ● Select channel by pressing the RED ( ) key. ● Press the / or PG-/PG+ keys to change the position of the channel you want, and press the key for confirmation. ● If you want to return the channel to the initial position, do not press the key but press the BLUE ( ) key.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 24 OPERATING THE RECEIVER 3. Parental Lock This "Parental Lock" feature sets viewing restrictions and prevents unauthorized access to your STB through the PIN (Personal Identification Number), which is a 4 digit number. (The factory preset PIN Code : 0000) On selecting this menu, you will have two options: to set lock for any desired channel and to change your PIN value. ● Enter PIN Code.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 25 OPERATING THE RECEIVER 3.2. Change PIN Code To change the PIN Code, select the second option "Change PIN Code". This will take you to the following menu: In this option, you need to enter the current PIN Code at the first cursor, and at the second cursor enter the desired PIN Code. To confirm, you need to enter the new PIN Code again. Please remember the PIN Code should be a 4 digit numerical value. THE FACTORY PRESET PIN Code : 0 0 0 0. 4.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 26 OPERATING THE RECEIVER 4.2 OSD Setting You can set the OSD transparency and the display time. ● Select OSD Transparency level. The OSD Transparency level from 0 to 100%. Setting is made with the numeric keys, / keys or PG-/PG+ keys. / keys : Setting in increment of 1%. PG-/PG+ keys : Setting in increment of 10%. ● Set the display duration of the information(banner) box displayed in the screen. The time ranges from 0.5 to 60.0 seconds.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 27 OPERATING THE RECEIVER 4.4 Modem Setting Note : DSR 9510X, DSR 9510Y and DSR 9510Z are supported Internal modem & External modem at all. DSR 9500AX, DSR 9500AY and DSR 9500AZ are supported only External modem. ● ● ● Modem Type: If I internal Modem is installed in DSR 9510X, DSR 9510Y and DSR 9510Z, "Internal" will be displayed. Otherwise, "External" will be displayed.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 28 OPERATING THE RECEIVER 4.5 System Information If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press key. The following will be the on-screen display. 4.6 Software Upgrade You can download and upgrade the software of this STB through ASTRA and Hotbird satellite when the new software is released. During downloading don’t turn off the STB.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 29 OPERATING THE RECEIVER 5. Common Interface This STB is equipped with two PCMCIA slots, which enable the use of two CI-CAMS. When a Common Interface CAM is inserted inside the PCMCIA slot, the system detects the type of the CAM automatically and display in the main menu. On choosing this menu, you will be able to access the different options available with the type of the CAM like authorizations, pre-booking, package details etc.
DSR 9500/9510 2.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 31 TECHNICAL SPECIFICATIONS 1. User section 4000 programmable channels, software download via satellite & PC(Secured), advanced Electronic Program Guide, multi-language supported for OSD, DiSEqC 1.2 supported full function infrared remote control unit, 7 segment LED display, auto and manual scan facility, channel organizing (programmable), SCARTS & RCA output, low power consumption 2.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 32 TECHNICAL SPECIFICATIONS Video decoder System decoding: Profile and level: Data rate: Video formats: Picture resolution: MPEG 2 ISO/TEC 13818 (transport stream) MPEG 2 MP@ML (4:2:2) 1~ 15 Mb/s 4:3 (normal) & 16:9 (widescreen) 720(H) x 576(V) x 50 fields/sec Audio Decoder System decoding: Audio mode: Sampling frequency: MPEG 1 ISO/TEC 11172~3 layer I & II mono, dual, stereo, joint stereo 32, 44.
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 33 Serial data interface Standard: Connector type: RS232C, Max. 115.2 kB 9 pin D-type female Internal modem (For models DSR 9510X, DSR 9510Y, DSR 9510Z) External Modem Port: Connector Type: Data Rate: This connector is for future purposes only. Embedded descrambler 2 slots, embedded CAS: RS232C RJ-11 modular jack V.