User manual

Installing WALKMAN Guide and Media Go (for
Windows)
1 Connect your Walkman to a running
computer using the USB cable (supplied).
USB cable (supplied)
2 Select the following order with the
computer.

Windows 7 or earlier: Select [Start] – [Computer] or [My
Computer] – [WALKMAN] – [Storage Media] – [FOR_
WINDOWS].

Windows 8: Select [Desktop] from [Start screen] to open
[File Explorer]. In the [Computer] list, select [WALKMAN] –
[Storage Media] – [FOR_WINDOWS].
3 Double-click [Setup.exe].
The install wizard appears.

When you execute [Setup.exe], the [Setup.exe] file stored in
the [FOR_WINDOWS] folder of your Walkman is copied to
your computer for backup, and WALKMAN Guide and Media
Go are installed to your computer.

If [Setup.exe] does not start, copy the [Setup.exe] file to your
desktop, then double-click it.
Contents
Please check the items in the package.
 “WALKMAN” (1)
 Headphones (1)
 Earbuds (1 set)
 USB cable (1)
 Quick Start Guide (this manual)
About the Operating System
Make sure that the OS is Windows XP*
1
(Service Pack 3 or later), Windows
Vista*
2
(Service Pack 2 or later), Windows 7*
2
(Service Pack 1 or later), or
Windows 8.
*
1
Excluding 64-bit OS versions.
*
2
[Compatibility mode] for Windows XP is not supported.
For a Mac computer, make sure that the OS is Mac OS X v10.6 or later.
Not supported by OSs other than above
HOLD switch
BACK/HOME button
5-way button
OPTION/PWR OFF button
Charging the Battery
The battery for your Walkman is recharged while the Walkman is
connected to a running computer.
About
4hours
Charging
Fully-charged
Charging...
When your Walkman has been fully charged, disconnect it from the
computer.
For a Mac computer, click the [WALKMAN] eject icon in the sidebar of
Finder to disconnect your Walkman.
Note

To prevent battery deterioration, charge the battery at least once every six
months or every year.
4 Follow the on-screen instructions.
After the install wizard finishes, the WALKMAN Guide and
Media Go shortcuts appear on the desktop of your computer.
The Help Guide is included in the WALKMAN Guide.
Installing the Help Guide and the Content Transfer
software (for Mac)
1 Connect your Walkman to a running
computer using the USB cable (supplied).
2 On the computer, select [WALKMAN] in the
sidebar of Finder, then open the [FOR_MAC]
folder.
3 Double-click the installer icon of the desired
software:
To install the Help Guide: [Help_Guide_Installer_for_Mac]
To install the Content Transfer software: [ContentTransfer.pkg]
4 Follow the on-screen instructions.
After the installer finishes, the alias (shortcut) of the installed
software (Help Guide or the Content Transfer software)
appears on the desktop of your computer.
 Hint

Before you attempt to delete the software from your Walkman, copy the
[FOR_MAC] folder to your Mac computer as a backup if necessary.
How to Install the Supplied Software
About the manuals
This Quick Start Guide only describes the basic operating instructions
and how to install the supplied software.
For detailed information and operating instructions, refer to the Help
Guide (HTML document) included in the supplied software after
installation.
How to Use your “WALKMAN”
Quick Start Guide
©2013 Sony Corporation Printed in Malaysia
How to Install the Bundled Software
How to Use Your “WALKMAN”
NWZ-E583/E584/E585
Turning your “WALKMAN” On and Off
To turn on Slide the HOLD switch in the direction opposite to that
of the arrow and press any button.
To turn off Press and hold the OPTION/PWR OFF button.
How to use the Home menu
The Home menu appears when you press and hold the BACK/HOME
button. The Home menu is the starting point to play audio, search for
songs, changing settings, etc.
From the Home menu, you can select the desired item on the screen by
using the 5-way button.
Confirm.
Return to the previous screen.
Home menu
SensMe™ Channels
FM Radio
Photos
Settings
Voice Recording
Videos
Music
Go to song
playback screen
Podcasts
Noise Canceling
Playlists
4-466-634-11(1)
Access to the online Help Guide (Full version).
For PC or Smart phones
While browsing is free, you may charge the
communication fee according to your carrier
contract.
http://rd1.sony.net/help/dmp/nwze580/en/