user manual

4
VPL-FX30
ITEM List For Screen
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
ASPECT 00h 20h FULL 0000h Set/Get
NORMAL 0001h
ZOOM 0003h
FULL1 0007h
FULL2 0008h
4:3 0009h
16:9 000Ah
OVER SCAN 00h 23h OFF 0000h
ON 0001h
ITEM List For Setup
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
INPUT TERMINAL 00h 01h VIDEO 0000h Set/Get
SVIDEO 0001h
INPUTA 0002h
INPUTB 0003h
INPUTC 0004h
PIC MUTING 00h 30h OFF 0000h
ON 0001h
AUDIO MUTING 00h 31h OFF 0000h
ON 0001h
INPUT A SIGNAL-SEL 00h 32h AUTO 0000h
COMPUTER 0001h
COMPONENT 0002h
VIDEOGBR 0003h
PICTURE MUTING
MODE
00h 3dh IMAGE 0000h
SHUTTER 0001h
LAMP MODE 00h 40h HIGH 0000h
STANDARD 0001h
ITEM List For Infrared Remote Command
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Upper byte Lower byte
Infrared Remote Command
(15 bit category)
17h Refer to Section
2-1-2.
*1
_
00h 00h Set only
Infrared Remote Command
(20 bit E category)
19h
_
00h 00h
Infrared Remote Command
(20 bit EE category)
1Bh
_
00h 00h
*1: For using this item number, the simulation of the infrared remote controller is enable. Select the corresponding code in the table of
Section 2-1-2 and use it as the lower byte of the item number.
n Other value is assigned depending for category.