3-866-873-13(1) Stereo Turntable System Operating Instructions GB Mode d’emploi FR OWNER‘S RECORD The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PS-LX250H Serial No.
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. For the customers in the U.S.A. Precautions On safety • Before operating the unit, check that the operating voltage of your unit is identical with that of your local power supply. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.
Welcome! Thank you for purchasing the Sony Stereo Turntable System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Convention The following icon is used in this manual: Indicates hints and tips for making the task easier.
Getting Started Assembling the Turntable Installing the dust cover Insert the hinges on the dust cover into the hinge pockets on the rear of the cabinet. 5 3 2 4 1 Hooking up the Turntable 1 Set the EQ switch according to the jacks of your stereo system (amplifier). • When your stereo system (amplifier) has PHONO input jacks (connect to PHONO input jacks) nset to OFF. • When your stereo system (amplifier) does not have PHONO input jacks (connect to AUX, VIDEO input jacks, etc.) nset to ON.
Operations To stop playing Playing a Record Press STOP. To pause playback Press the UP/DOWN button to raise the stylus off the record. To listen to a different part of the record 1 2 STOP 1 5 4 3 1 2 3 UP/DOWN To play a 17-cm record Place a record on the platter. Press UP/DOWN button. Move the tone arm to the position you desire. Press UP/DOWN button. The tone arm descends to the record. Place the supplied 45 r/min adaptor on the spindle.
Additional Information Maintenance Stylus and Record Care In order to prevent premature stylus and record wear, the stylus and record should be cleaned before playback. To clean the stylus, brush it from back to front using a good quality stylus cleaning brush. Do not clean the stylus with your finger tip. When using a fluid stylus cleaner, make sure not to moisten the stylus too much. Cleaning the Cabinet and Dust Cover Clean the cabinet and dust cover periodically using a soft dry cloth.
Additional Information Troubleshooting Before going through the check list below, first make sure that: • The power cord is securely connected. • The speaker cords are securely connected. Should any problem persist after you have made these checks, consult your nearest Sony dealer. The tone arm skips, skates or does not advance. b The turntable is not level. Place the turntable on a level surface. b The record is dirty or scratched.
Additional Information Parts and Controls 1 2 3 4 5 6 7 8 9 EQ switch Spindle 45 r/min adaptor Speed select button Rubber mat Platter Cartridge and headshell START button 0 !¡ !™ !£ !¢ !∞ !§ !¶ Dust cover Hinge Tone arm Arm stand Finger lift SIZE SELECTOR STOP button UP/DOWN button Insulator 1 2 0 !¡ 3 8GB 4 !™ 5 !£ 6 !¢ 7 !∞ 8 !§ 9 !¶
GB
AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. N’installez pas l’appareil dans un espace confiné comme dans une bibliothèque ou un meuble encastré. A l’attention de la clientèle canadienne ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES. NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU UNE AUTRE SORITIE DE COURANT.
Bienvenue ! Merci d’avoir choisi cette platine tourne-disque stéréo Sony. Avant de la mettre en service, veuillez lire attentivement le mode d’emploi et le conserver pour toute référence future. Convention L’icône suivante est utilisée dans le mode d’emploi: Elle indique des conseils et suggestions qui facilitent les opérations.
Préparatifs 5 Assemblage de la platine tourne-disque Posez le contre-plateau sur le plateau. Installation du couvercle Insérez les charnières sur le couvercle dans les gonds à l’arrière de la platine. 5 3 2 4 1 1 Réglez le commutateur EQ selon les prises de votre chaîne stéréo (amplificateur). • Si votre chaîne stéréo (amplificateur) a des prises d’entrée PHONO (connexion aux prises d’entrée PHONO) nréglez-le sur OFF.
Fonctionnement Pour arrêter la lecture Lecture d’un disque Appuyez sur STOP. Pour interrompre la lecture Appuyez sur la touche UP/DOWN pour relever le bras du disque. Pour écouter une autre partie du disque 1 2 STOP 1 5 4 3 UP/DOWN Posez un disque sur le plateau. 1 2 3 Appuyez sur la touche UP/DOWN. Amenez le bras de lecture à la position souhaitée. Appuyez sur la touche UP/DOWN. Le bras descend sur le disque. Pour écouter un 45 tours Posez l’adaptateur 45 tours fourni sur l’axe.
Informations complémentaires Entretien Nettoyage du saphir et des disques Pour éviter une usure prématurée du saphir et des disques, nettoyez-les avant la lecture. Pour nettoyer le saphir, brossez-le de l’arrière vers l’avant avec une petite brosse spéciale saphirs de bonne qualité. Ne nettoyez pas le saphir avec les doigts. Si vous utilisez un liquide de nettoyage spécial, n’imprégnez pas trop le saphir de liquide.
Informations complémentaires Guide de dépannage Avant de passer en revue la liste suivante, vérifiez que: • Le cordon d’alimentation est correctement branché. • Les cordons des enceintes sont correctement branchés. Si un problème persiste après les vérifications suivantes, consultez votre revendeur Sony.
Informations complémentaires Nomenclature 1 2 3 4 5 6 7 8 9 Commutateur d’égaliseur (EQ) Axe Adaptateur 45 tours Sélecteur de vitesse Contre-plateau Plateau Cartouche et tête de lecture Touche de marche (START) 0 !¡ !™ !£ !¢ !∞ !§ !¶ Couvercle Charnière Bras de lecture Repose-bras Onglet Sélecteur de disque SIZE SELECTOR Touche STOP Touche UP/DOWN Pied isolant 1 2 !º !¡ 3 Sony Corporation 8FR 4 !™ 5 !£ 6 !¢ 7 !∞ 8 !§ 9 !¶ Printed in China