3-866-873-15(1) Stereo Turntable System Operating Instructions OWNER‘S RECORD The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PS-LX250H Serial No.
Before use, make sure to read the accompanying sheet “For the customers in the U.S.A.” Precautions On safety Before operating the unit, check that the operating voltage of your unit is identical with that of your local power supply. Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. Unplug the unit from the wall outlet if it is not to be used for an extended period of time.
Welcome! Thank you for purchasing the Sony Stereo Turntable System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Convention The following icon is used in this manual: Indicates hints and tips for making the task easier.
Getting Started Assembling the Turntable 1 Installing the dust cover Insert the hinges on the dust cover into the hinge pockets on the rear of the cabinet. Hooking up the Turntable Set the EQ switch according to the jacks of your stereo system (amplifier). When your stereo system (amplifier) has PHONO input jacks (connect to PHONO input jacks) set to OFF. When your stereo system (amplifier) does not have PHONO input jacks (connect to AUX, VIDEO input jacks, etc.) set to ON.
Operations Playing a Record To stop playing Press STOP. To pause playback Press the UP/DOWN button to raise the stylus off the record. To listen to a different part of the record 1 2 3 Press UP/DOWN button. Move the tone arm to the position you desire. Press UP/DOWN button. The tone arm descends to the record. 1 To play a 17-cm record Place a record on the platter. Place the supplied 45 r/min adaptor on the spindle. When you have finished using the adaptor, put it back in the adaptor tray.
Additional Information Maintenance Stylus and Record Care In order to prevent premature stylus and record wear, the stylus and record should be cleaned before playback. To clean the stylus, brush it from back to front using a good quality stylus cleaning brush. Do not clean the stylus with your finger tip. When using a fluid stylus cleaner, make sure not to moisten the stylus too much. Cleaning the Cabinet and Dust Cover Clean the cabinet and dust cover periodically using a soft dry cloth.
Additional Information Troubleshooting Before going through the check list below, first make sure that: The power cord is securely connected. The speaker cords are securely connected. Should any problem persist after you have made these checks, consult your nearest Sony dealer. The tone arm skips, skates or does not advance. The turntable is not level. Place the turntable on a level surface. The record is dirty or scratched.
Additional Information Parts and Controls EQ switch Spindle 45 r/min adaptor Speed select button Rubber mat Platter Cartridge and headshell START button Dust cover Hinge Tone arm Arm stand Finger lift SIZE SELECTOR STOP button UP/DOWN button Insulator Sony Corporation Printed in China