Instruction Manual

Precautions

Pouch

• If you want to pause or temporarily store the system while playing games or

video, put the system in sleep mode before placing it in the pouch. This may

help to avoid overheating.

• Put both the PSP™ system and the remote control in hold mode to help

prevent unintended operation.

Never disassemble the system or accessories

Use the PSP™ system and accessories according to the instructions in this

manual. No authorization for the analysis or modification of the system, or the

analysis and use of its circuit configurations, is provided. Disassembling will

void the system warranty. Additionally, there is a risk of fire, electrical shock

or malfunction. The LCD screen, in particular, contains dangerous, high-

voltage parts, and the laser beam for reading UMD™ may cause visual

impairment if exposed directly to the eyes.

Using the access point

When using the PSP™ system's 'Scan' function to select the wireless LAN

access point, access points that are not intended for public use may be

displayed. Only connect to a personal access point that you are authorized to

use, or one that is available through a public wireless LAN or hotspot service.

Overseas use

Depending on the country, there are limitations on the use of certain types of

radio waves. In some cases, use of the system may lead to a fine or other

penalty.

Moisture condensation

If the PSP™ system or UMD™ is brought directly from a cold location to a

warm one, moisture may condense on the lens inside the system or on the

UMD™. Should this occur, the system may not operate properly. In this case,

remove the UMD™ and turn off and unplug the system. Do not put the UMD™

In accordance with copyright law, no recorded data may be used for

purposes other than personal enjoyment without permission from the