Operation Manual

79
Photo
US
model name1PSP-1001
2-657-883-11(1)
Photo options menu
masterpage:Right
filename G:\#Sagyo\#SONY\03 PSP\US\0905_PSP
US_Web\PSP-1001K_GB\PSP-
1001K_GB\2649166121_PSP1001K_GB\01EN11PHO.fm
You can transfer images with another PSP™ system using ad hoc mode
( page 107). The steps for the sender and the receiver are different.
1 Set up for ad hoc mode. (both sender and receiver)
1 Turn on the WLAN switch on the left side of the PSP™ system
( page 23).
2 Prepare to receive the image. (receiver)
1 Under , select the icon for the location where you want to save the
image, and then press the button.
2 Select "Receive", and then press the button.
The system is now ready to receive an image.
3 Send the image. (sender)
1 Select the image you want to send, and then press the button.
2 Select "Send", and then press the button.
The nicknames for PSP™ systems ready to receive an image are displayed.
3 Select the system to send to, and then press the button.
The system starts to send the image.
4 Save the image received. (receiver)
When the transfer is completed, the image that was received is displayed
on the screen.
1 With the image displayed, press the button.
A confirmation message is displayed.
2 Select "Yes", and then press the button.
Hints
• The location where an image is saved depends on your selection in step 2-1. Note that you
cannot save images in the Digital Camera Images folder.
• You can also transfer images using the on-screen control panel ( page 73).
Sending and receiving images
Sender
Receiver
01PSP-1001 EN.book Page 79 Monday, September 5, 2005 8:45 PM