User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
To Press
Switch to Teletext*'
/ (Teletext)
Select the sound*^
CHOIX SON
Use FASTEXT*'
FASTEXT buttons
Call up the on-screen display
(E) AFFICH
Change the Teletext page*' c /'C
Switch to/from wide mode of a Sony wide TV (For
other manufactures’ wide TVs, see “Controlling
other TVs with the remote commander (SLV-
SE820B only)” below.)
(wide)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types ofbatteries together.
• Some buttons may not work with certain Sony TVs.
SLV-SE820B only
*^not available on SLV-SE220B
Controlling other TVs with the remote commander (SLV-
SE820B only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the following table, set the appropriate manufacturer’s code
number.
^ Set |TV| / IMAGNI at the top of the remote commander to |TV|.
2 Hold down 1/1, and enter your TV’s code number using the programme
numberbuttons. Thenrelease 1/1.
Now you can use the following TV control buttons to control your TV:
1/1, t TV/MAGN, programme number buttons, — (ten’s digit),
CHAINE +/-, 2 +/-, a (TV), / (Teletext), FASTEXT buttons,
(wide)*, MENU*, M/m/</,*, and OK*.
• These buttons may not work with all TVs.
14 Settinguptheremotecommander