User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
Set the day, month, and year in
sequenee by pressing , to seleet
the item to be set, and press Mm to
seleet the digits, then press
The day of the week is set
automatieally.
Press Mm to seleet OUI for the
setting of the Auto Cloek Set
funetion* *.
The VCR automatieally sets the
eloek aeeording to the time signal
broadeast between the ehannels
ST 1 to ST 5.
If you do not need the Auto Cloek
Set funetion, seleetNON.
SÉLECT. RÉGLER :
FIN : OK SORTIE : MENU
o
Press MENU to exit the menu.
Tips
• If you set HORLOGE AUTO* to OUI, the Auto Clock Set function is activated
whenever the VCR is turned off. The time is adjusted automatically by making
reference to the time signal from the station.
• To change the digits while setting, press < to return to the item to be changed, and
select the digits by pressing Mm.
• not available on SLV-SE620B
22 Setting the clock