User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
To save a recording
To prevent aeeidental erasure, break off the
safety tab as illustrated. To reeord on the
same tape again, eover the tab hole with
adhesive tape.
Tips
• To seleet a programme position, you ean use the programme number buttons on the
remote eommander. For two-digit numbers, for example, press 2 and 3 to seleet
“ST 23.”
• If you eonneet additional equipment to a LIGNE eonneetor orjaek, you ean seleet
the input signal using the CHOIX ENTREE or CHAINE +/- buttons.
• The© AFFICH information appears on the TV sereen indieating information
about the tape, but the information will not be reeorded on the tape.
• If you do not want to wateh TV while reeording, you ean turn off the TV. When
using a deeoder, make sure to leave it on.
Notes
• The© AFFICH information does not appear during still (pause) mode or slow-
motion playbaek.
• If a tape has portions reeorded in both PAL (SECAM, MESECAM) and NTSC
systems, the time eounter reading will not be eorreet. This diserepaney is due to
the differenee between the eounting eyeles of the two video systems.
• You eannot wateh a Canal Plus programme while reeording another Canal Plus
programme.
• When you insert a non-standard eommereially available tape, the remaining time
may not be eorreet.
• The remaining time is intended for rough measurement only.
• About 30 seeonds ai^er the tape begins playbaek, the tape remaining time will be
displayed.
*
*1 not available on SLV-SE220B
*
2
SLV-SE820B and SE720B only
*
3
SLV-SE620B and SE220B only
40 Recording TV programmes