User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
To set the clock
^ Hold down0 PROG so that “DAY” appears in the display window.
However, if the eloek has already been set, the eurrent setting appears.
2 Turn© PROG to set the day.
2 Press© PROG.
“MONTH” appears in the display window.
^ Turn and press© PROG to set the month, and then the year.
After you set the year, “CLOCK” appears in the display window again.
^ Turn and press© PROG to set the hour and minute.
0 When you have finished setting the time, press© PROG to start the
eloek.
Tips
• To eaneel a Dial Timer setting, press X (stop) on the VCR while you are making
the setting.
• The programme is reeorded in the eurrent tape speed mode. To ehange the tape
speed, press SP/LP before you eomplete the setting in step 9.
• To eheek, ehange, or eaneel the programme setting, see “Cheeking/ehanging/
eaneelling timer settings” on page 57.
Notes
• If eight programmes have already been set using the ShowView system or the
MINUTERIE menu, “FULL” appears in the display window for about five
seeonds.
• The© indieator flashes in the display window when you eomplete the setting in
step 9 with no tape inserted.
• If you set the eloek using the Auto Cloek Set funetion and HORLOGE AUTO is
set to OUI, the eloek will adjust itself to the ineoming time signal regardless of
adjustments made with the Dial Timer. Be sure you have set the Auto Cloek Set
eorreetly.
• When the time is set ineorreetly, “ERROR” appears in the display window in step
9. Set the timer again fTom step 1.
• You eannot set the tape speed to AUTO using the Dial Timer. To seleet AUTO, set
the tape speed in the MINUTERIE menu
(see page 57).
00
a>
<n
O
T3
(D
o
3
<n
continued-
Recording TV programmes using the Diai Timer (SLV-SE820B oniy) 45