User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
About the Demonstration Mode
The Dial Timer funetion has a Demonstration Mode that allows the user, sueh as a
salesperson, to enter more than eight examples of timer settings when demonstrating
the use of the Dial Timer. It eaneels the “FULL” notiee whieh appears if eight
programmes have already been set. Do not use the Demonstration Mode for making
timer reeordings. Doing so may eause the settings to be inaeeurate.
To activate the Demonstration Mode
Press X (pause) on the VCR while turning the © PROG. “DEMO” appears
in the display window for a few seeonds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration
Mode is eaneelled, the timer settings entered while using the Demonstration
Mode will remain. Be sure to manually eaneel the timer settings before you
use the Dial Timer or any other timer method after reeonneeting the mains
lead (
see page 57).
46 Recording TV programmes using the Diai Timer (SLV-SE820B oniy)