User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
In step 4 above, press m to seleet AUTO. When you are reeording a
programme in the SP mode and the remaining tape length beeomes shorter
than the reeording time, the reeording tape speed is automatieally ehanged to
the LP mode. Note that some noise will appear on the pieture when the tape
speed is ehanged. To operate this funetion eorreetly, the
“SÉLECT.CASSETTE” setting in the RÉGLAGES UTILISATEUR menu
must be aeeurate (
see page 66).
Tips
• To set the line input video source, you can also use the CHOIX ENTREE button.
• You ean set the extended time for the ShowView setting by 10, 20, 30, 40, 50, or 60
minutes. Set ÉTENDRE SHOWVIEW in the FONCTIONS AVANCÉES menu to
the desired extended time
on page 67.
• To eheek, ehange, or eaneel the programme setting, see “Cheeking/ehangingZ
eaneelling timer settings” on page 57.
Notes
• If the VPS/PDC signal is too weak or the broadeasting station failed to transmit
VPS/PDC signals, the VCR will start reeording at the set time without using the
VPS/PDC funetion.
• The© and© U indieators flash in the display window when you press 1/1 with
no tape inserted.
• When you set OPTIONS PROG. to NORMALE in the FONCTIONS AVANCÉES
menu, the SHOWVIEW menu does not appear on the TV sereen. Seleet
SHOWVIEW or MIXTE.
•
• not available on SLV-SE220B
To use the Auto Tape Speed function*
50 Recording TV programmes using the ShowView® system (not avaiiabie on SLV-SE620B)