User guide
Table Of Contents
- Precautions
- 4
- 11
- 12
- 16
- 19
- 21
- 23
- 24
- 25 28
- 33
- 36
- 38
- 42
- 47
- 51
- 54
- 56
- 57
- 59
- 62
- 64
- 65
- 66
- Back Cover
- Front panel For SLV-SE820B
- For SLV-SE820B and SE720B
- For SLV-SE620B and SE220B
- For SLV-SE820B, SE720B and SE620B
- For SLV-SE220B
- TV control buttons
- Code numbers of controllable TVs
- To a stereo system (not available on SLV- SE620B and SE220B)
- To a satellite or digital tuner with Line Through
- For SLV-SE820B, SE720B and SE220B
- For SLV-SE620B
- To cancel the Auto Set Up function
- Before you starts
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- o
- To stop recording
- Daily/weekly recording
- To use the Auto Tape Speed function*^
- Before you starts
- To resume normal playback
- To use the shuttle ring in jog mode
- Before you starts
- To extend the duration
- To cancel the duration
- To stop recording
- Before you starts
- When the timer settings overiap
- To select bilingual sound while recording
- To select the sound while recording
- To find a specific recording by scanning (Index scan)
- To search a specific recording (Index search)
- To stop searching
- To turn on the indicators in the dispiay window
- Menu choices
- RÉGLAGES UTILISATEUR
- FONCTIONS AVANCEES
- Before you start editing
- To stop editing
- Tip
- Before you start...
- To stop editing
- System
- Inputs and outputs
- General
- Supplied accessories
- Quick Start Guide
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you starts
• Refer to “Index to parts and controls” for button locations.
^ While recording, press Z ENR.
The© indicator appears in the display window.
OD
©I
MAGN
's P
n •“//“/
IJ-JIJ
CTO
VIDEO
_ n- J n ®
I IJ-JIJ ""
2 Press ENR repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
0:3^ —► 1:00---------► 4:0^ 4:3^ Normal recording
In LP mode
Each press advances the time as shown below.
■ 0:3^ —► 1:00
--------
► 8:0^ 9:0^ Normal recording
J
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press ENR repeatedly to set a new duration time.
To cancel the duration
Press ENR repeatedly until the© indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press ■ (stop).
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
56 Setting the recording duration time