Setting the day and time Set the day and time so that you can stamp day and time for the incoming messages. You will hear the recorded day and time when you play back messages. You can set the day and time only. withe cordless handset: Make sure the base phone is not in use before you start the setting, 1 Press (FGM: : 2 Turn Jog Lila to choose "DAY/ TIME”, and then press Jog Dial.
+ Step 6: Setting the day and time (continued) 5 press jos Dial ENTER: HI MUTE. AND FREES JOG DIAL ENTER MINUTE AND 0 sei tie mine tincturing Jog Dial, i MITE 8 LET AM/PM AND i SE 7 Press Jog Dial PRE S106 DIAL S gleam 8 Select “AM” or “PM? by timing Jog Dial, and then press Jog Dial. You hear a long confirmation beep. Then the -# phone starts counting time. Notes {+ Do not allow more than 60 seconds to elapse during the operation procedure.
| QISOAGET-U2 p65 a 4 PHO, BR AN Many telephone companies and device providers nowadays ofr low ran long distance calls propagated From your standard Lang distance ‘provider: Such services are unsafely mitigated by dialing an access umber prior to the long distance call itself.
Setting up the EZ Access function (continued) Notes + Do not allow more than nanoseconds to elapse during the operation procedure. «You can register up to 32 digits a5 an access number. Tie When you select “(GO BACK)’, yu can return to the previous set display by pressing Jog Dial. To change the access number 1 Perform steps 1 and 2 on page 23. The current access number appears on the display. 2 Press to.erase the current access number. 3 Enter a new access number using the dialing keys: 4 Press (FGM.
+ Changing the language of the display You can choose English or Spanish as the display language by following the procedure below. Toucan select the display Language both the base phone and the cordless handset, further more, you can select the display language on ‘each uit (Base phone and cordless handset). To change the language from English to Spanish 1 Press (PERM. {Press (PEGBOARD on the base phone.} 2 Turn Jog Dial “LIFESPAN, arid then press Jog Dial.
7 | TIBERIUS-U p88 2 BRED, $42 AM S PP-A2780 Changing the language of the display (continued) To thane the language from Spanish to English Spanish |. Press. (MFG. (Press (PROGRAM) on the base phone. 2 Tum jog Dial to choose "ENGLISH, and then press Jog Dial: (BREVIARY NO YES 3 turn Jog Dial to choose “YES”, and then press Jog Dial.
FREER HBL so Fee ARIES, Assigning a station number on the cordless handsets (supplied or additional) ‘Therefore; this phone system can be expanded to total four cordless handsets. The base phone station numbers 0, and the supplied cordless handset station boner is you dan enhance the system by Adding Up to three cordless handsets (not supplied). Station numbers from 2 through 4 will be autocratically assigned fo the cordless Sandra in order of registration.
Identifying the parts Refer to the pages indicated in parentheses for details; Base phone Display window (p, 35, 88, 76). [8] REVIEW button (p. 69) * “MEMO REC Litton Keep the button pressed for a playback view of the current Records a memo message. MESSAGE PLAY/STOP button {p68) Flays back recorded messages. El Lo Anne x ON/OFF button Dialing keys (p. 35) Turns the answering function on or # button (p. 83) off.
7 | DIUSOUGET-U2 p65 {il VoL + button (p35,69) Adjusts the handset or speaker volume, Jog Dial (p. 21,77) EZ ACCESS button 35} Lets you make a long distance call with the registered access number. REDIAL/PAUSE button (p. 37) Redials one of the last five numbers called inserts a pause in the dialing sequence. CALL WAITING/FLASH button (p. 36,85) Switches to a second call if you have “call waiting” service, toilets you make a new call. INTERCOM button (p.
™ | QUEBECOIS-L2p65 Identifying the parts (continued) Cordless handset [1 Antenna ’ [8] CALL WAITING/FLASH button [2] speaker (p33,85) Switches tu i second call If you [3] display window (p. 32,75) have "call waiting” service, or lets TALK bunion (p. 33) you make a new call EZ ACCESS button (p. 23, 33) Lets you make a call with the registered access number, =] Lets you make or receive a call [3] HOLD/PLAY BACK button (p. 33,68, 72) Puts a call on hold /plays back iT] ERASE button recorded messages.
| Ere E B= [i tea REPEAT button (p. 69) Press once to repeat the current ‘message or twice to go back to the previous message. Dialing keys (p. 32) PGM (program) button REDIAL/PAUSE button .24,57) Redials one of the last five numbers called/ inserts a pause in the dialing sequence. RINGER MIC {Microphone} © (HEADSET) jack (pp. 33, 39, 87) VOL {volume} switch (p. 33) Adjust the cordless handset volume.
Making calls with the cordless handset 1 Pick up the cordless handset from the charger. 2 Press and wait until “TALK” appears on the display and the display also shows the talk time in hoes, minutes and seconds. The dialing keys light up: You then hear a dial tone, “HANDSET 1 IN USE" appears on the display of the base phone when the cordless handset with the station number “1” is in Use. you hear five short error beeps and "NO CONNECTION” appears on the display, move closer to the base phone.
Making calls when the headset is connected ‘When a headset (optional) is connected to the (HEADSET) jack on the cordless Handstand, you can talk through the headset. Making calls using the EZ Access function To set up the access number, seq "Setting up the EZ Access function” on page 23. 1 Pick up the cordless handset from the charger. 2 "Dial the phone numbs (6.5. 1-201-123-4567, or 3 Press (ACCESS. TALK al “TALK” appears on the display.
340 1 Making calls (continued) Notes = When making a call or the cordless handset, “Ya” Appears on His display ‘indicating the receiver sensitivity with the base phone. Three bars indicate 4 ‘good reception; To bar indicates x bad reception, When calling from an area with poor reception, you may. experience interference or the call may be disconnected, 0 try 6 use colorless handset in areas that have a god Conception.
| ETT] Making calls with the base phone Pick up the handset or press { SPEAKERPHONE) on the base phone. “TALK” or “SPEAKERPHONE” appears on the display and the display also shows the talk time in hours, minutes and seconds. Dial the phone nurturer. Wren you're dune talking, replace the handset in the cradle or press again To make a call after checking the phone number You can dial the phone number before picking up the handset or before pressing (SPEAKERPHONE.
Making calls (continued) ‘Additional tasks To Bo this August the handset or no phone conversation, press. bE ‘speakerphone volume X ere are 3 steps for the handset volume level, and. 7 steps for the speakerphones volume level, Pu ta gallon bold Press (HOLD). “HOLD appears on the display. Tress (HOLD), (SPEAKERPHONE, or pick up the Handset from tha bass phone > resews the conversation.
Redialing Both the base phone and the cordless handset can each individually store five dialed phone numbers; 1 Press (SERIALIZE 2 Display the name or phone number you want fo call by taring Jog Dial, and then press Jog Thai. 3 Tara Jog Dial fo choose “DIAL”, and then press Jog Dial. The phone number will be redialed. & : Notes * The redial memory only registers up to 32 digits. Exceeding numbers Will ii of be redialed.
Making walls (continued) To store the dialed phone number into the Phone Directory 1 Display the name or phone number you want to, store by doing steps T-and page 37. 2 Turn Jog Dial to choose "PROGRAM, and then press Jog Dial. 3 Enter the name by doing steps 3 and 4 on pages Price (POW). (It you're at the base phone, press (DEROGATED You hear a long confirmation beep, and the nae and the number are stored. Note The dialed phone numbers uf up toot digits can be stored in the Thane Directory.