filename[D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CEL.
D:\NORM'S JOB\SO0135\4262412121_GB\GB02REG_STR-DH720-CEL.fm4-262-412-12(1) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SO0135\4262412121_GB\GB02REG_STR-DH720-CEL.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SO0135\4262412121_GB\GB02REG_STR-DH720-CEL.fm4-262-412-12(1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
D:\NORM'S JOB\SO0135\4262412121_GB\GB02REG_STR-DH720-CEL.fm masterpage: Right The font type (Shin Go R) installed in this receiver is provided by MORISAWA & COMPANY LTD. These names are the trademarks of MORISAWA & COMPANY LTD., and the copyright of the font also belongs to MORISAWA & COMPANY LTD. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks and registered trademarks are of their respective holders.
D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CELTOC.fm masterpage: Left Table of Contents About This Manual........................................4 Supplied accessories......................................7 Description and location of parts...................9 Getting started .............................................17 “BRAVIA” Sync Features 1: Installing the speakers .............................18 2: Connecting the speakers ..........................20 3: Connecting the TV ..............
D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CELTOC.fm Additional Information Precautions .................................................. 76 Troubleshooting .......................................... 77 Specifications .............................................. 84 Index............................................................
D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CELTOC.fm masterpage: Left Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching 3 and # on the batteries to the diagram inside the battery compartment of the remote control. Notes • Do not leave the remote control in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm masterpage: Right Description and location of parts Front panel 1 qk qj 2 3 qh 4 qg A ?/1 (on/standby) (page 33, 50, 56, 75) B TONE, TONE MODE (page 67) C INPUT SELECTOR (page 42, 48, 60, 61) D Display panel (page 10) E Remote control sensor Receives signals from remote control. F DISPLAY (page 51, 74) G DIMMER Adjusts the brightness of the display panel in 3 levels. 5 qf 67 qd 8 9 qs qa q; N 2CH/A.DIRECT, A.F.D., MOVIE/HD-D.C.S.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm masterpage: Left Indicators on the display panel 1 LH RH L C R SL S SR 2 3 4 SW LFE COAX HDMI OPT 5 6 7 DTS -ES 96/24 NEO:6 DTS-HD MSTR HI RES LBR LPCM 8 9 PL II x z TrueHD SLEEP D + EX ST D.RANGE RDS SBL SB SBR qd A Playback channel indicators The letters (L, C, R, etc.) indicate the channels being played back.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm G Dolby Pro Logic indicator Lights up the respective indicator when the receiver performs Dolby Pro Logic processing. This matrix surround decoding technology can enhance input signals. PL PL II PL IIx PL IIz Dolby Pro Logic Dolby Pro Logic II Dolby Pro Logic IIx Dolby Pro Logic IIz masterpage: Right M DTS-HD indicator Lights up the respective indicator when the receiver is decoding the corresponding DTS-HD format signals.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm masterpage: Left Rear panel 1 1, 2 3 2 1 A Audio signal section DIGITAL INPUT/OUTPUT jacks (page 22, 26, 27, 28, 29) HDMI IN/OUT OPTICAL IN COAXIAL IN ANALOG INPUT/OUTPUT jacks (page 20, 22, 26, 27, 29, 31) B Video signal section* The image quality depends on the connecting jack.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm D SPEAKERS section (page 20) masterpage: Right Remote control Use the supplied remote control to operate this receiver and other equipment. The remote control is assigned to operate Sony audio/ video equipment. You can reassign the input button to match the equipment connected to your receiver (page 74). * You must connect the HDMI TV OUT or MONITOR OUT jack to your TV to watch the selected input image (page 22).
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm To use the buttons printed in pink Hold down SHIFT (O), then press the button printed in pink that you want to use. Example: Hold down SHIFT (O), then press ENT/MEM (C). 2 Press J masterpage: Left , V/v/B/b Press V/v/B /b to select the settings, then press to enter/confirm the selection. K TOOLS/OPTIONS Displays and selects items from the option menus. L MENU/HOME Press AMP (Y), then press MENU/HOME to display the menu to operate the receiver.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm Notes • Be sure to reduce the volume level before you turn off this function. • As this function is available only when Dolby Digital, DTS or Linear PCM signals are input, the sound may suddenly increase when you switch to other formats. • This function does not work in the following cases. – Linear PCM signals with a sampling frequency of more than 48 kHz are being received.
D:\NORM'S JOB\SO0135\4262412121_GB\GB03DES_STR-DH720-CEL.fm masterpage: Left To control other Sony equipment Be sure to hold down SHIFT (O) to activate the buttons printed in pink (page 14).
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right Getting started You can enjoy your audio/video equipment connected to the receiver by following the simple steps below. Installing and connecting the speakers (page 18, 20) Checking the connection appropriate for your equipment Connecting the TV and video equipment (page 22, 23) The image quality depends on the connecting jack. See the illustration below. Select the connection according to the jacks on your equipment.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Left Connections 1: Installing the speakers This receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer). Example of speaker system configuration 5.1 channel speaker system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer. 7.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right Tips Connections • When you connect a 7.1 channel speaker system with two surround back speakers, all the angles A should be the same. • When you connect a 7.1 channel speaker system with two front high speakers, place the front high speakers – at an angle between 22° to 45°. – at least 1 meter (3.3 feet) directly above the front speakers. • When you connect a 6.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right Connections * When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output. **If you connect only one surround back speaker, connect it to the SPEAKERS SURROUND BACK/FRONT HIGH L terminals.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Left 3: Connecting the TV You can watch the selected input image when you connect the HDMI TV OUT or MONITOR OUT jack to a TV. You can operate this receiver using a GUI (Graphical User Interface) if you connect HDMI TV OUT jack to a TV.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Notes • Before connecting cords, be sure to disconnect the AC power cord (mains lead). • Be sure to turn the receiver on when the video and audio signals of a playback equipment are being output to a TV via the receiver. If the power supply of the receiver is not turned on, neither video nor audio signals will be transmitted. • Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Notes on HDMI connections • An audio signal input to the HDMI IN jack is output through the SPEAKERS terminals, HDMI TV OUT jack and PHONES jack. It is not output through any other audio jacks. • Video signals input to the HDMI IN jack can only be output through the HDMI TV OUT jack. The video input signals cannot be output through the VIDEO OUT jacks or MONITOR OUT jacks.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right When connecting cords Connections • Before connecting cords, be sure to disconnect the AC power cord (mains lead). • It is not necessary to connect all the cords. Connect according to the availability of jacks on the connected equipment. • Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p, Deep Color (Deep Colour) or 3D images may not be displayed properly.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Left Connecting a Blu-ray Disc player, DVD player Blu-ray Disc player, DVD player Audio/video signals Audio signals Video signals or A B* C A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right Connecting a satellite tuner, cable TV tuner Connections Satellite tuner, Cable TV tuner Audio/video signals Video signals Audio signals or A B C A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Connecting a PlayStation 3 masterpage: Left Connecting an iPhone, iPod for video contents PlayStation 3 Audio/video signals A A A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right Connecting other equipment Connections DVD recorder, VCR Audio signals A Video signals Audio/video signals B C D Camcorder, video game A Audio cord (not supplied) B Video cord (not supplied) C HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. D Audio/video cord (not supplied) * If you want to record, you must make this connection (page 48).
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Left Function for conversion of video signals The receiver is equipped with a function for converting video signals. Video signals and component video signals can be output as HDMI video signals (HDMI TV OUT jack only). As the default setting, video signals input from the connected equipment are output as shown in the table with solid arrows.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Left 5: Connecting the antennas (aerials) 6: Connecting the AC power cord (mains lead) Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead). Connect the AC power cord (mains lead) to a wall outlet.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Preparing the Receiver Initializing the receiver Setting the speakers Selecting the speaker pattern Select the speaker pattern according to the speaker system which you are using. 1 After “GUI ON” appears on the display panel for a while, the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. ?/1 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 3 4 Press V/v repeatedly to select “Speaker”, then press or b. Press V/v repeatedly to select “SP Pattern”, then press or b. masterpage: Left Using AUTO CALIBRATION This receiver is equipped with DCAC (Digital Cinema Auto Calibration) function which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver. • Adjust the speaker level.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Notes Setting up the Auto Calibration Optimizer microphone 3 Set up the optimizer microphone. Place the optimizer microphone at your seating position. Use a stool or tripod so that the optimizer microphone remains at the same height as your ears. Confirm active subwoofer setup • When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer. Turn the LEVEL to just before the mid-point.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Performing Auto Calibration masterpage: Left 3 Press V/v repeatedly to select “Auto Cal.”, then press or b. 4 Press B/b repeatedly to select “Standard”, then press . ?/1 Input buttons The calibration type is automatically set to “Engineer”. GUI MODE V/v/B/b, MENU MUTING/ 1 MASTER VOL +/–/ 2 +/– Press GUI MODE. After “GUI ON” appears on the display panel for a while, the GUI menu appears on the TV screen.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 7 Press V/v repeatedly to select the item you want, then press . 8 Save the measurement result. Select “Save” in step 7. Note You can select the calibration type you want by using the “Custom” Auto Calibration (page 38). 9 Disconnect the optimizer microphone from the receiver. Note If you reposition your speaker, we recommend that you perform Auto Calibration again to enjoy the surround sound.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Message list after Auto Calibration measurement Display and explanation Error Code 31 The SPEAKERS is set to off. Set to other speaker settings (page 9) and perform the Auto Calibration again. Error Code 32 None of the speakers were detected. Make sure that the optimizer microphone is connected properly and perform the Auto Calibration again.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 3 Guide to on-screen display operation 4 Press V/v repeatedly to select the menu item you want to adjust, then press to enter the menu item. 5 Repeat steps 3 and 4 to select the parameter you want. TOOLS/ OPTIONS MENU Using the menu 1 2 Switch the input of the TV so that an image of the menu is displayed. To return to the previous screen Press RETURN/EXIT O. To exit the menu Press MENU. Press GUI MODE.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Overview of the main menus Menu icon Input Music Video 2 Description Selects the input source equipment connected to the receiver (page 41). masterpage: Left Press V/v repeatedly to select a menu you want, then press or b to enter the menu. The menu item list appears on the TV screen. Input”. Example: When you select “ Selects the music from iPhone/iPod (page 43) or USB device (page 46). Selects the video from iPhone/iPod (page 43).
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 3 Basic Operations Select the equipment you want, then press . ?/1 Input buttons GUI MODE V/v/B/b, 4 Turn on the equipment and start playback. TOOLS/ OPTIONS MENU 5 Press MASTER VOL +/– or 2 +/– to adjust the volume. You can also use MASTER VOLUME on the receiver. MUTING/ SOUND FIELD +/– MASTER VOL +/–/ 2 +/– 1 6 Press SOUND FIELD +/– to enjoy the surround sound. You can also use 2CH/A.DIRECT, A.F.D., MOVIE/HD-D.C.S.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Tips • You can turn INPUT SELECTOR on the receiver or press input buttons on the remote control to select the equipment you want. • You can adjust the volume differently depending on the speed you turn the MASTER VOLUME on the receiver. To turn the volume up or down quickly: turn the knob quickly. To make fine adjustment: turn the knob slowly.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm masterpage: Right Playing an iPhone/iPod You can enjoy music/video contents from the iPhone/iPod by connecting it to the iPhone/iPod terminals on the receiver. For details on connecting the iPhone/iPod, see 28, 31.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Selecting the iPhone/iPod control mode Operating the iPhone/iPod using “System GUI” mode You can select the iPhone/iPod control mode using the GUI menu or iPhone CTRL on the remote control. You can use the GUI menu to browse contents on the iPhone/iPod. You can also control all operations by viewing the information on the display panel when “GUI MODE” is turned off.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 3 Select the content you want using iPhone/iPod menu. For details on operating the iPhone/iPod, refer to the operating instructions supplied with iPhone/iPod. To operate the iPhone/iPod using the remote control Notes on iPhone/iPod • The iPhone/iPod is charged when connected to the receiver while the receiver is turned on. • You cannot transfer songs onto the iPhone/ iPod. • Do not remove the iPhone/iPod during operation.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm Playing a USB device masterpage: Left Product name Model name NWZ-A826 / A828 / A829 NWZ-W202 You can enjoy music from the USB device by connecting it to the (USB) port on the receiver. For details on connecting a USB device, see “Connecting an iPhone, iPod, USB device” (page 31).
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 1 2 Press USB or AMP before you use the following buttons. Press MENU if the GUI menu does not appear on the TV screen. Press Operation N Starts play. X Pauses play. x Stops play. m or M Fast reverses or forwards. . or > Goes to the previous/next file. FOLDER +/–* Goes to the previous/next folder. Select “ or b. Music”, then press Press to select “USB”. You can operate the USB device using the remote control of the receiver.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm • Some time may be needed to start playback when: – the folder structure is complex. – the memory capacity is excessive. • This receiver does not necessarily support all the functions provided in a connected USB device. • The playback order for the receiver may differ from the playback order of the connected USB device. • Folders that have no audio files are skipped. • When playing a very long track, some operations may cause playback delay.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 1 Tuner Operations masterpage: Right Press GUI MODE. Press MENU if the GUI menu does not appear on the TV screen. Listening to FM/AM radio 2 You can listen to FM and AM broadcasts through the built-in tuner. Before operation, be sure you have connected the FM and AM antennas (aerials) to the receiver (page 32). Tip The tuning scale for direct tuning is shown below.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 2 Press SHIFT, then press numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 (b 0*) Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 2 While holding down TUNING MODE, press ?/1 on the receiver. 3 Change the current AM tuning scale to 9 kHz (or 10 kHz). To reset the scale to 10 kHz (or 9 kHz), repeat the procedure above. * Press 0 for Europe model only.
D:\NORM'S JOB\SO0135\4262412121_GB\GB04GET_STR-DH720-CEL.fm 5 Repeat steps 1 to 4 to store another station. You can store station as follows: • AM band: AM 1 to AM 30 • FM band: FM 1 to FM 30 Tuning to preset stations Select “ FM FM” or “ AM AM” from the menu, then press or b. 2 Select the preset station you want. Preset numbers from 1 to 30 are available.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Left x A. DIRECT (Analog Direct) Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver’s pre-programmed sound fields. SOUND FIELD +/– Press SOUND FIELD +/– repeatedly to select the sound field you want. You can also use 2CH/A.DIRECT, A.F.D., MOVIE/HD-D.C.S. or MUSIC on the receiver.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm x HD-D.C.S. HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on precise response measurement data of a mastering studio. With HD-D.C.S.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Left x NEO6 MUS (Neo:6 Music) Notes on sound fields Performs DTS Neo:6 Music mode decoding. A source recorded in 2 channel format is decoded into 7 channels. This setting is ideal for normal stereo sources such as CDs. • Depending on the speaker pattern settings, some sound fields may not be available. • You cannot select PLIIx and PLIIz at the same time.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Right Digital audio formats supported by the receiver Digital audio formats that this receiver can decode depend on digital audio output jacks of the equipment connected. This receiver supports the following audio formats. Audio format Maximum number of channels Connection between the playback equipment and the receiver COAXIAL/OPTICAL HDMI 5.1 a a Dolby Digital EX 6.1 a a Dolby Digital Plus 7.1 × a Dolby TrueHDa) 7.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. ?/1 MUSIC 1 Press ?/1 to turn off the receiver. 2 While holding down MUSIC, press ?/1. “S.F. CLEAR” appears on the display panel and all sound fields are reset to their default setting.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Preparing for the “BRAVIA” Sync The receiver is compatible with the “Control for HDMI-Easy Setting” function. • If your TV is compatible with the “Control for HDMI-Easy Setting” function, you can set the Control for HDMI function of the receiver and playback equipment automatically by setting the Control for HDMI function on your TV (page 57).
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Left Notes Notes • Before you perform the “Control for HDMI-Easy Setting” on your TV, be sure to turn on the TV and other connected equipment including the receiver first. • If the playback equipment cannot function after you have made the settings for “Control for HDMIEasy Setting”, check the Control for HDMI setting on your TV.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Right • When you adjust the TV volume, the System Audio Control function adjusts the receiver’s volume simultaneously. Hold down TV, then press TV ?/1. Notes Notes • If System Audio Control does not function according to your TV setting, refer to the operating instructions of the TV.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Enjoying optimum sound field for the selected scene (Scene Select) The Scene Select function allows you to enjoy the optimum picture quality and switches the sound field according to the selected scene on your TV. For details on the operation, refer to the operating instructions of the TV.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Notes • Some audio input modes may not be set up based on the input. • When the USB input is selected, “------” appears on the display panel, and you cannot change to other modes. Select another input, then set the audio input mode. • When “A. DIRECT” is being used, audio input is set to “ANALOG”. You cannot select other modes. • The Audio Return Channel (ARC) function does not work in the following cases.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Input name Assignable video input jacks Assignable audio input jacks masterpage: Left BD/DVD GAME SAT/CATV VIDEO1 VIDEO2 SA-CD/CD COMP.1 a* a a a a a COMP.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm 2 Adjusting Settings Using the Settings menu masterpage: Right Select “ Settings” from the menu, then press or b to enter the menu mode. The Settings menu list appears on the TV screen. You can adjust various settings for speakers, surround effects, etc. using the Settings menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in “GUI MODE” by following the steps in “To turn “GUI MODE” on and off” (page 39).
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Settings menu list Settings menu Description Auto Cal. Sets the speaker level or distance and makes the measurement automatically (page 34). Speaker Sets the speaker position manually (page 64). Surround Selects the sound field and adjusts the surround effect you choose (page 67). EQ Adjusts the equalizer (bass/ treble sound) (page 67). Audio Sets various sound items (page 68).
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Right Notes Tips • Depending on the speaker pattern setting, some parameters may not be available. • This function does not work when “A. DIRECT” is being used. • The “Large” and “Small” settings for each speaker determine whether the internal sound processor will cut the bass signal from that channel.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/– or 2 +/–. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the TV screen during adjustment. To output test tone from each speaker You can output test tone from the speakers in sequence. 1 Select “Test Tone”, then press or b. 2 Adjust the parameter, then press . • OFF • AUTO: The test tone is output from each speaker in sequence.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Surround Settings menu You can select the sound field and adjust the effect level, etc. on the “Sound Field Setup” screen. For details on the sound field, see “Enjoying Surround Sound” (page 52). Note The setup items you can adjust on each menu vary depending on the sound field. To adjust the effect type for HD-D.C.S. 1 Select “HD-D.C.S.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Left x Night Mode Audio Settings menu You can adjust settings for the audio to suit your preference. x A/V Sync (Synchronizes audio with video output) Lets you retain a theater-like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Right • OFF: The receiver does not output HDMI signals when the receiver is in the standby mode. Turn on the receiver to enjoy the connected equipment’s source on the TV. This setting saves power in the standby mode when compared with the “ON” setting. x HDMI Assign Notes You can customize the settings of the receiver. • This function is not available when “Ctrl for HDMI” is set to “OFF”.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Left Using the menu in the display panel Operating without connecting to a TV You can operate this receiver using the display panel even if the TV is not connected to the receiver. Press GUI MODE repeatedly to select “GUI OFF”. The receiver is switched to front panel display mode. 1 2 3 AMP GUI MODE V/v/B/b, RETURN/ EXIT O MENU Press AMP. Press MENU. Press V/v repeatedly to select the menu you want, then press or b.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm masterpage: Right Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 70. Menu [Display] Parameters [Display] Auto Calibration settings [] Auto Calibration (Standard) [STANDARD] Level settings [] Default setting Auto Calibration (Custom) [CUSTOM] FULL.FLAT, ENGINEER, FRONT.REF, OFF ENGINEER Test tonea) [T.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.fm Menu [Display] masterpage: Left Parameters [Display] Settings Default setting Front high speakers sizea) [FH SIZE] LARGE, SMALL LARGE Front left speaker distancea) [FL DIST.] FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.1 m (1 inch) interval)c) FL 3.00 m (FL 9’10”) Front right speaker distancea) [FR DIST.] FR 1.00 m to FR 10.00 m (FR 3’3” to FR 32’9”) (0.1 m (1 inch) interval)c) FR 3.
D:\NORM'S JOB\SO0135\4262412121_GB\GB05ENJ_STR-DH720-CEL.
D:\NORM'S JOB\SO0135\4262412121_GB\GB06REM_STR-DH720-CEL.fm To view the information on the display panel The display panel provides various information of the receiver status such as sound field. 1 Select the input for which you want to masterpage: Left Using the Remote Control Reassigning the input button check the information. 2 Press AMP, then press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows.
D:\NORM'S JOB\SO0135\4262412121_GB\GB06REM_STR-DH720-CEL.fm 3 Referring to the following table, press the corresponding button for the category you want, then release AV ?/1. Resetting the input buttons Example: Press 1, then release AV ?/1. Now you can use the SAT/CATV button to control the Blu-ray Disc player.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm masterpage: Left On placement Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate on the back of the receiver.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Power The receiver is turned off automatically. • “Auto Standby” is set to “ON” (page 69).
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm There is no sound from a specific equipment. • Check that the equipment is connected correctly to the audio input jacks for that equipment. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the equipment. • Check the INPUT MODE (page 60). • Check the setting of “Audio Out” in the HDMI Settings menu (page 69).
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm No sound is output from the receiver and TV speaker. • Check the setting of “Audio Out” in the HDMI Settings menu (page 69). • Check that the equipment is connected correctly to the HDMI jack for that equipment. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback equipment, you may need to set up the HDMI setting of the equipment. Refer to the operating instructions supplied with each equipment.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission. No 3D image appears on the TV. • Depending on the TV or the video equipment, 3D images may not be displayed. When the receiver is in standby mode, there is no image output from the TV.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm The RDS information that you want does not appear.* • The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. * Europe model only. iPhone/iPod The sound is distorted. • Press MASTER VOL – or 2 – on the remote control repeatedly. • Set the “EQ” setting of the iPhone/iPod to “Off” or “Flat”. The iPhone/iPod cannot be charged. • Check that the receiver is turned on.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm Erroneous display. • The data stored in the USB device may have been corrupted. • The character codes that can be displayed by this receiver are as follows: – Upper cases (A to Z) – Numbers (0 to 9) – Symbols (’ < > * + , – . / [ \ ] _ `) Other characters may not be displayed correctly. The USB device is not recognized. • Turn off the receiver, then disconnect the USB device. Turn on the receiver again and reconnect the USB device.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm • The types and the number of equipment which can be controlled by the “BRAVIA” Sync are restricted in the HDMI CEC standard as follows. – Recording equipment (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 equipment – Playback equipment (Blu-ray Disc player, DVD player, etc.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm 1) Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section USA model1) Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.
D:\NORM'S JOB\SO0135\4262412121_GB\GB07ADD_STR-DH720-CEL.fm AM tuner section General Tuning range Area masterpage: Right Power requirements Tuning scale Area Power requirements 10 kHz step 9 kHz step USA, Canada 120 V AC, 60 Hz USA, Canada 530 kHz – 1,710 kHz 531 kHz – 1,710 kHz Europe 230 V AC, 50/60 Hz Europe – 531 kHz – 1,602 kHz Power consumption 240 W Power consumption (during standby mode) 0.3 W (When “Ctrl for HDMI” is set to “OFF”) Dimensions (width/height/depth) (Approx.
D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CELIX.fm masterpage: Left Index Numerics D M 2 channel 52 5.1 channel 18 7.
D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CELIX.
D:\NORM'S JOB\SO0135\4262412121_GB\GB01COV_STR-DH720-CELIX.