3-866-957-12(1) Stereo Power Amplifier Operating Instructions GB Mode d’emploi FR TA-N1 1999 by Sony Corporation
WARNING For the customers in Canada CAUTION To prevent fire or shock hazard, do not expose the unit to rain or moisture. TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
About This Manual The instructions in this manual are for model TA-N1. Check your model number by looking at the front panel. In this manual, the European model is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, “USA/Canada only.” Convention The following icon is used in this manual: z Indicates hints and tips for making the task easier.
Hooking Up the Components Unpacking Check that you received the following items: • AC power cord (1) • AC power plug adapter (3 to 2 prong polarized type) (1) (USA/Canada only) Before you get started This chapter describes how to connect a Sony TA-E1 preamplifier, your speakers, and your other audio components to the power amplifier. Be sure to read this section before making any connections. 4GB • Turn off the power to all components before making any connections.
Preamplifier Hookups (Unbalanced Connections) Connect the preamplifier you are using (Sony TA-E1, etc.) to the power amplifier’s UNBALANCED 1 or UNBALANCED 2 input jacks. For details, refer to the instructions supplied with the preamplifier. Required cords When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.
Preamplifier Hookups (Balanced Connections) Hooking Up the Components Connect the BALANCED output jacks on the preamplifier you are using (Sony TA-E1, etc.) to the power amplifier’s BALANCED jacks. For details, refer to the instructions supplied with the preamplifier. Required cords Balanced cords (not supplied) (L) (L) (R) (R) Note The pin assignment of the BALANCED input jacks on the amplifier are 1:GROUND, 2:HOT, and 3:COLD.
Speaker Hookups (Standard Connections) Connect the jacks on the speakers to the SPEAKERS A or B terminals on the power amplifier using a single speaker cord for each speaker. There is no difference in the sound output from SPEAKERS A and B. For details, refer to the instructions supplied with the speakers. Required cords Connect the jacks on the speaker to the power amplifier’s SPEAKERS A or B terminals. Connecting the speaker cords Caution This is a high output amplifier.
Speaker Hookups (Bi-wired Connections) Hooking Up the Components When the speakers you are making connections to can be bi-wired, bi-wired connections can be made to this unit. Connect the two sets of jacks on the speaker to the SPEAKERS A and B terminals on this unit using two speaker cords for each speaker. For details, refer to the instructions supplied with the speakers.
Power Hookup Connect the supplied power cord to the AC IN terminal on this unit. (USA/Canadian model only) The supplied power cord has a 3-pronged grounded plug. If you are using a 3-pronged grounded outlet, the plug can be inserted directly into the outlet. However, if the socket is a 2-pronged grounded outlet, use the supplied AC power plug adapter or a commercially available AC power plug adapter.
Location of Parts and Basic Operations This chapter explains the names and basic operations of the buttons and controls located on the front and rear panels.
23 Location of Parts and Basic Operations PROTECTION BALANCED 1 UNBALANCE 2 UNBALANCE 1 1 U (power) switch Press to turn the power amplifier on and off. • When turning the power on, turn down the volume on the preamplifier to a minimum, then turn the preamplifier and this unit on respectively. Similarly, when turning the power off, turn down the volume on the preamplifier, then turn the amplifier and preamplifier off respectively. This is done to prevent damage to the speakers.
Rear Panel Parts Description 1 2 SPEAKERS + R – – L + – L + Location of Parts and Basic Operations –A– –B– + R – IMPEDANCE USE 4~16Ω A + B USE 8~16Ω INPUT UNBALANCED L 2 BALANCED CONNECTION ASSIGNMENT 1 2 2 UNBALANCED 1 76 1 SPEAKERS A jacks For details, see page 7. 2 SPEAKERS B jacks Use with SPEAKERS A terminals when bi-wired speaker connections are made (page 8).
Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the power amplifier and have it checked by qualified personnel before operating it any further. On power sources On placement • Place the power amplifier in a location with adequate ventilation to prevent heat buildup and prolong the life of the power amplifier. • Do not place the power amplifier near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
Precautions On heat emission during use This unit will become very hot during use. This is not a malfunction. The entire surface of the cabinet will become quite hot, especially when playing at high volumes. In such cases, do not touch the cabinet. Touching the cabinet may cause physical injury or fire. In addition, do not use this unit in a completely enclosed cabinet. Place it in a well ventilated location to prevent an excessive rise in temperature.
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 200 watts per channel minimum RMS power, with no more than 0.05% total harmonic distortion from 250 milliwatts to rated output (USA model only).
AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’éviter tout risque de choc électrique, ne pas ouvrir le coffret. Confier toute réparation à un technicien qualifié uniquement. N’installez pas l’appareil dans un espace confiné comme dans une bibliothèque ou un meuble encastré.