Manual

This section describes how to operate the projector to view the picture from the equipment
cmmected to the projector. It also describes how to a_!just the quality of the picture to suit
your taste.
Projecting the Picture on the Screen
"0
5"
Example: To view the picture
fi'om the video
equipment connected
to the VIDEO INPUT
connector.
2
Power on both the equipment
and the device connected to the
equipment.
Press INPUT repeatedly to
select the input you want to
project on the screen.
Display the indication of the input you
waut.
To view the picture lr0m Press INPUT to display
Video equipment connected to the VIDE() INPUT connector Vide()
Video equipment connected to S VIDEO INPUT connector S-Video
RGB/component equipment connected to the INPUT A connector Input-A*
Component equipment connected to Y/PI3/CB/PI</CI_ connectors Component
Equipment connected to the HDMI connector HDMI**
* Sel Ihe "lnput-A Signal Sel." setling in the Selup _ menu according to Ihe signal input. When
you set it to "Auto," and cannot display the picture properly, select an appropriate signal
according to the input signal. ((_" page 47, 50, 61 )
** The color gradation of the dark area or the bright area may become unclear when a signal other
than those li'om HDMI standard cable is input. Adjust the Brightness and the Contrast in the
Picture _ menu. ((_" page 41)
Tip
When "Auto lnput Search" is set to "On" in the Function _ menu, the input terminal with effective
signals is automatically displayed by pressing INPUT.
27