Operation Manual

17
Remote Commander
Overview
AUDIO jack (stereo minijack)
To listen to sound output from a
computer, connect via this jack to the
audio output of the computer.
d AC IN socket
Connects the supplied AC power cord.
e OUTPUT
MONITOR connector (HD D-sub
15-pin, female)
Connect to the video input connector of
the monitor. Outputs signals from the
selected channel and computer signals
only from among the signals from the
INPUT A or INPUT B.
AUDIO jack (stereo minijack)
Connects to external active speakers.
The volume of the speakers can be
controlled by the VOLUME +/– keys on
the Remote Commander.
When INPUT A or B is selected, the
sound input to the AUDIO connector of
INPUT A or B is output.
When VIDEO or S VIDEO is selected,
the sound input to the AUDIO input
connector of VIDEO IN is output.
f VIDEO IN (Video input)
Connects to external video equipment .
S VIDEO jack (mini DIN 4-pin)
Connects to the S video output (Y/C
video output) of video equipment.
VIDEO jack (phono type)
Connects to the composite video output
of video equipment.
AUDIO jack
Connect to the audio output of video
equipment.
g REMOTE
RS-232C connector (D-sub 9-pin,
female)
Connects to a computer to operate the
projector from the computer.
Remote Commander
The supplied remote commander differs
according to the model. Refer to the relevant
page.
VPL-CX125/CX155: Page 17.
VPL-CX100/CX120/CX150: Page 19.
The keys that have the same names as those
on the control panel function identically.
a ?/1 (On/Standby) key
b INPUT A/B/C/D/E keys
Selects the input signal output from the
connector of the same name as those of
the Remote Commander.
INPUT D key and INPUT E key are not
used in this model.
VPL-CX125/CX155
COMMAND
INPUT
A
INPUT
B
INPUT
C
INPUT
D
VIDEO
ENTER
MENU APA
RESET
SHIFTZOOMFOCUS
ASPECT
D ZOOM MUTING
PIC
AUDIO
+
–
+
–
VOLUME
FREEZE
1 2 3
KEY
STONE
S VIDEO
INPUT
E
AIR
SHOT
OFF ON
ID MODE
1
2
wa
q
s
3
4
5
6
7
8
9
0
qa
qk
qf
qh
qj
qg
qd
w;
ql