Operation Manual

40
The Installation Menu
The Installation Menu
The Installation menu is used for changing the settings of the projector.
Sel: Set: Exit:
Picture
Signal
Function
Setup
Installation
Information
Lamp Mode: Standard
High Altitude Mode: Off
IR Receiver: Front & Rear
V Keystone:
Auto
Side Shot:
0
Image Flip:
Off
Background: Blue
ID Mode: All
Direct Power On: Off
Setting items Functions Initial setting
V Keystone Corrects the trapezoidal distortion caused by the projection
angle. Select “Auto” for automatic correction, or “Manual”
for manual correction using the v/V/b/B keys.
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
Auto
Side Shot
(VPL-CX125/
CX155 only)
Corrects the horizontal trapezoidal distortion of the picture
using the v/V/b/B keys.
When the right side is longer than the left side ()
Set to a higher value (+ direction).
When the left side is longer than the right side ()
Set to a lower value (– direction).
Set the adjustment level to “0” if you want to adjust the
picture more widely using “V Keystone” only.
0
Image Flip Flips the image on the screen horizontally and/or vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
Off
Background Selects the background color of the screen when no signal
is input to the projector. Select “Black” or “Blue.”
Normally, set to “Blue.”
Blue
Lamp Mode Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the “High” setting.
Standard
IR Receiver Selects the remote control detectors (IR Receiver) on the
front and rear of the projector.
• Front & Rear: Activates both the front and rear
detectors.
• Front: Activates the front detector only.
• Rear: Activates the rear detector only.
Front & Rear