Operating Instructions Data Projector VPL-CX155/CX125, VPL-CW125

14
Connection
• When the projector and a computer that has a
different network segment (subnet) are
connected, set [PC Registration List] (page
10) on the projector and [Projector Setting]
(page 18) on the computer.
• A maximum of 100 computers can be
displayed in the list.
• It may take time to project an image due to
the computer.
• External monitor signal of notebook type
computer may not be output when you use
Projector Station for Air Shot Version 2.
• When [When a connection/Disconnection
request is received] is set to [Always Yes] or
[Always No] in the setting of the application
software, the connection confirmation
message does not appear and the application
software always permits/refuses connection/
disconnection.
• Do not change the resolution of the computer
desktop while the projector and the computer
are connected. They may become
disconnected.
Disconnecting
1 Press the AIR SHOT key on the
remote commander.
2 Press the M or m key on the remote
commander to select the connecting
computer from the list, then press the
ENTER key.
When the confirmation message appears
in the computer, click [Yes] to
disconnect.
Switching
1 Press the AIR SHOT key on the
remote commander.
2 Press the M or m key on the remote
commander to select the computer to
be connected from the list and then the
ENTER key.
Connecting
1 Perform steps 1, 2 and 3 of
“Connecting” on page 13.
2 Click the projector button of the
projector to be connected.
• When the projector and a computer that has a
different network segment (subnet) are
connected, set [PC Registration List] (page
10) on the projector and [Projector Setting]
(page 18) on the computer.
• It may take time to project an image due to
the computer.
• External monitor signal of notebook type
computer may not be output when you use
Projector Station for Air Shot Version 2.
Switching
Click the projector button being connected
on the main window and then select the
computer to be connected.
Notes
Yamada PC
Yamada PC
Connecting PC: Tanaka PC
(xxx. xxx. xx. x)
Tanaka PC ( xx. x. xx. xx )
Suzuki PC (xxx. xxx. xx. x)
Saito PC ( xx. x. xx. xx )
Sakuma PC (xxx. xxx. xx. x)
Appears when the computer is connected.
Connecting/Disconnecting/
Switching from the Computer
Notes
Projector button