Operating Instructions Data Projector VPL-CX155/CX125, VPL-CW125

19
Setting/Operating via Web
After access, the following display appears.
Click [Information].
You can confirm the current state of the
projector on the computer. You cannot
change the settings of the projector.
Click [Control].
You can control the projector on the
computer. The functions of each button
provide the same functions the button of the
identical name.
Click [Network].
You can switch the mode and set each mode.
To switch the mode, select the desired mode
button and then click [Select].
To set each mode, select the desired mode
button and then click [Setup] to display the
Setup display of the mode.
Click the [Apply] button to reflect the
projector.
Confirming the State of
Projector Settings
(Information)
Operating the Projector
(Control)
Setting the Connecting Mode