Operating Instructions Data Projector VPL-CX155/CX125, VPL-CW125

4
Before Operation
first projector. If you use VPL-CW125 and
another model at the same time, connect
VPL-CW125 as the second or third, etc.
The network presentation function supplied
with VPL-CX155/CX125/CW125 series,
etc. is compatible with Air Shot Version 2
supplied with VPL-CX86/CX76. To use the
network presentation function and Air Shot
Version 2 when the application software -
Projector Station for Air Shot Version 2
(version 1.xx) - is installed, install the
Projector Station for Air Shot Version 2
(Version 2.xx) supplied with VPL-CX155/
CX125/CW125 series in the computer. The
installed Air Shot Version 2 (Version 1.xx) is
uninstalled automatically.
The application software is installed for the
first time and to use both of the network
presentation function and Air Shot Version
2, install the Projector Station for Air Shot
Version 2 (Version 2.xx) supplied with VPL-
CX155/CX125/CW125 series in the
computer.
To use Simple Mode or USB wireless LAN
module by VPL-CX86/CX76, install
another driver or set the Simple Mode
setting. Use the USB WL LAN Driver
folder in the CD-ROM or USB wireless
LAN module (MEMORY) supplied with
VPL-CX86/CX76. Refer to the Operating
Instructions supplied with VPL-CX86/
CX76 to set Simple Mode.
As the USB wireless LAN module
supplied with VPL-CX86/CX76 is not
compatible with Windows Vista, the
simple mode cannot be used with
Windows Vista.
Use the latest version of Projector Station
for Air Shot Version 2. When the version
is up, take care that the version older than
the installed one is not installed.
The [Projector Setting] tab is displayed to
[Option] for the wired LAN function.
However, it is not available for VPL-
CX86/CX76.
The [Simple Mode Setting] tab for the
Simple Mode function is displayed in
[Option]. However, it is not available for
VPL-CX155/CX125/CW125 series, etc.
Air Shot supplied with VPL-CX85/CX75 is
not compatible with Air Shot Version 2
supplied with VPL-CX86/CX76 or the
network presentation function supplied with
VPL-CX155/CX125/CW125 series. To use
both versions of the software, do either of
the following:
Use the original program without updating
When using VPL-CX85/CX75, start
Projector Station for Air Shot. When using
VPL-CX155/CX125/CW125/FE40/
FE40L/FX40/FX40L/CX86/CX76, start
Projector Station for Air Shot Version 2.
When using in Simple Mode, use USB
wireless LAN module, each supplied with
VPL-CX85/CX75 or with VPL-CX86/
CX76.
Update the Air Shot version of the VPL-
CX85/CX75
Use the “Memory Stick” to update the
version of the Air Shot to Air Shot Version
2 Light. For the update program and
instructions, refer to the folder “Air Shot
Version 2 Light” in the CD-ROM supplied
with VPL-CX155/CX125/CW125 series.
Recommended system requirements for the
installed Projector Station for Air Shot
Version 2 are as follows.
Available computer
CPU: Intel Pentium III 600MHz or higher,
and CPU recommended by OS
Memory: 64MB or more, recommended
128MB or more, and Memory
recommended by OS
Hard disc: free capacity 10 MB or more
Other hardware requirements: CD-ROM
drive
Available OS
Microsoft Windows 98SE
Microsoft Windows Me
Microsoft Windows 2000
Microsoft Windows XP Home Edition
About Version Compatibilities
Notes
System Requirements