Operating Instructions Data Projector VPL-CX155/CX125, VPL-CW125

7
Preparation
Projector Station for Air Shot Version 2
starts up automatically.
When you are not going to project the
pictures, click [OK].
After executing [AutoConfig.exe], start up
the application with [PjstnASv2.exe].
When you change the computer, execute
[AutoConfig.exe].
Setting the projector
1 Connect the network cable to the
NETWORK connector of the
projector.
2 Turn on the projector.
3 Press the INPUT C or AIR SHOT key
on the remote commander.
The home display of the network
presentation appears.
Preparing the Projector
Model name
Serial number
Operations
guide
Nick name (only
when specified)
IP address
Mode
Icon
Icons representing network status:
being not connected
being connected