Operation Manual

45
Specifications
Others
• When a signal other than the preset signals shown above is input, the picture may not be displayed
properly.
• For the Memory No.49*, the smart APA function and the APA key of the remote commander do
not active. Make adjustments for the input signal using the Adjust Signal... on the INPUT
SETTING menu.
• When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this
case, input a signal with no black edges around the image, and disconnect and reconnect the cable
or select the input signal by pressing the INPUT key.
45 1280 × 960 SXGA VESA 60 Hz 60.000 60.000 H-pos, V-pos
46 SXGA VESA 75 Hz 75.000 75.000 H-pos, V-pos
47 1280 × 1024 SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos
48 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos
49* SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos
50 1400 × 1050 SXGA+ 60 Hz 63.981 60.020 H-neg, V-neg
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync
Notes