Operating Instructions Data Projector VPL-PX41

24 Projecting

Smart APA (Auto Pixel Alignment) adjusts the picture of the connected

equipment so that it is projected clearly.

• If “Auto Input Search” is set to “On”, the projector searches for the signals from

the connected equipment and displays the input channel where the input signals

are found.

For details, see “Auto Input Search” in the SET SETTING menu on page 34.

• The smart APA is effective for the input signal from a computer only.

5 Switch the equipment to be connected to output to the projector.

Depending on the type of your computer, for example a notebook, or an all-in-

one LCD type, you may have to switch the computer to output to the projector

by pressing certain keys (e.g., , etc.), or by changing your

computer’s settings.

The key for switching the computer to output to the projector varies depending on

the type of a computer.

6 Adjust the vertical trapezoidal distortion of the picture with the “V

keystone.”

Press the TILT/KEYSTONE key on the Remote Commander to display the V

keystone menu (vertical trapezoidal distortion correction) and adjust the

distortion using the M/m/</, keys.

7 Turn the zoom ring to adjust the size of the picture.

8 Turn the focus ring to adjust the focus.

Looking into the lens when projecting may cause injury to your eyes.

Video equipment connected to the S VIDEO input

connector

S VIDEO

To input from Press INPUT to display

Notes

Note

Attention

VGA

LCD

and