Operating Instructions Data Projector VPL-PX41

41 Setting Up the Projector
Operation and Administration using a Network
mail to 4 different addresses. You can enter
up to 64 characters for each address.
Report Timing
Regular: Select this check box to arrange
the sending of the Regular Report.
Maintenance: Select this check box to
arrange the sending of an e-mail
message that informs you of the number
of hours the projector lamp has been
used and the time when maintenance is
required for the projector.
Error: Select this check box to arrange the
sending of an error report if any problem
occurs with the projector.
• Even if days are specified in the Report
Timing field, you still must select the
Regular check box to receive the Regular
Report. If the day preset in “Every Month on
Day” does not exist in the month, you will
receive the e-mail message on the last day of
the month.
• You cannot specify the day of the week or
day of the month if “Every Week on Days”
or “Every Month on Day” is not selected.
Mail Form field
Select the e-mail message type from
“Standard” or “Simple.”
Mail Account field
Mail Address
Type the appropriate e-mail address. You
can enter up to 64 characters.
Outgoing Mail Server (SMTP)
Type the address of the SMTP server. You
can enter up to 64 characters.
Requires Authentication
Select this check box when the
authentication is required for sending an e-
mail.
Requires the use of POP Authentication
before send e-mail (POP before
SMTP): Select this check box to arrange
for POP authentication to be performed
before connecting to the SMTP server.
Incoming Mail Server (POP3): Type the
address of the POP3 server.
Account Name: Type the mail account.
Password: Type the mail password.
SMTP Authentication: Select this check
box to arrange for SMTP Authentication
to be performed before connecting the
SMTP server.
Account Name: Type the mail account.
Password: Type the mail password.
Send test mail: Select the Send check box,
then click “Apply” to send an e-mail
message as a test to confirm whether it is
sent to the specified addresses.
If the following items have not been set or are
incorrectly set, an error message appears and
the test e-mail message is disabled:
• Address in the Address field.
• “Mail Address” and “Outgoing Mail Server
(SMTP)” in the Mail Account field.
For details on the mail settings, consult your
network administrator.
Check the contents of the e-mail
The contents of the e-mail message to be
sent appear.
Advanced setting
Click “Advanced Menu” to display the
Advertisement button, PJ Talk button and
SNMP button. These settings are mainly for
administrative use. For details, consult with
qualified Sony personnel.
You cannot use the following characters to
enter the characters in the text box: “ ' ”, “ " ”,
“\”, “&”, “<”, “>”
Notes
Notes
Note