Video Projector Operating Instructions VPL-VW50

Tip

Set “Input-A Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does

not appear properly, set it to “Computer.” (1 page 48, 56)

If you set your computer, such as a notebook type, to output the signal to both computer’s display

and this equipment, the picture of the equipment may not appear properly. Set your computer to

output the signal to only the external monitor.

For details, refer to the computer’s operating instructions supplied with your computer.

Connecting to a Computer

Note

HD-Dsub15 pin cable (optional) or HDMI cable (optional)

: Video signal flow

Right side of the projector

to monitor output

Computer

When using an optional HDMI cable, be sure to use

a cable with the HDMI logo.