Video Projector Operating Instructions VPL-VW50

28
This section describes how to operate the projector to view the picture from the equipment
connected to the projector. It also describes how to adjust the quality of the picture to suit
your taste.
Projecting the Picture on the Screen
* Set the “Input-A Signal Sel.” setting in the Setup menu according to the signal input. When
you set it to “Auto,” and cannot display the picture properly, select an appropriate signal according
to the input signal. (1 page 48, 52)
Tip
When “Auto Input Search” is set to “On” in the Function menu, the input terminal with effective
signals is automatically displayed by pressing INPUT.
Projecting
1 Power on both the equipment
and the device connected to the
equipment.
2 Press INPUT repeatedly to
select the input you want to
project on the screen.
Display the indication of the input you
want.
Example: To view the picture from
the video equipment
connected to the
VIDEO INPUT connector.
INPUTLIGHT
STANDARD CINEMA DYNA M IC
To view the picture from Press INPUT to display
Video equipment connected to the VIDEO INPUT connector Video
Video equipment connected to S VIDEO INPUT connector S-Video
Component equipment connected to Y/C
B/PB/CR/PR on the projector Component
RGB/component equipment connected to the INPUT A connector Input-A*
Equipment connected to the HDMI1 connector HDMI1
Equipment connected to the HDMI2 connector HDMI2