Projector User Manual
Table Of Contents
- Table of Contents
- Precautions
- Location of Controls
- Connections and Preparations
- Projecting
- Projecting the Picture on the Screen
- Using the Picture Position
- Selecting the Wide Screen Mode
- Watching 3D Video Images
- Selecting the Picture Viewing Mode
- Adjusting the Picture Quality
- Adjusting the Picture Using Real Color Processing
- Using the Supplied Software to Adjust the Picture Quality (ImageDirector3)
- Using the Menus
- Others
- About the Control for HDMI
- About the x.v.Color
- About the simulated 3D feature
- Troubleshooting
- Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake)
- Cleaning the Air Filter
- Cleaning and the Screen of the Projector
- How to Use the USB Charging AC Power Adaptor
- Specifications
- Ceiling Installation
- Index
79
Others
Black points and bright points (red,
blue, or green) on the screen
The projector is manufactured using high-
precision technology.
You may, however, see tiny black points
and/or bright points (red, blue, or green) that
continuously appear on the projector.
This is a normal result of the manufacturing
process and does not indicate a malfunction.
How to Use the USB
Charging AC Power
Adaptor
Use the provided USB charging AC power
adaptor to charge your 3D glasses.
Connect the USB charging cable supplied
with the unit, to the supplied USB charging
AC power adaptor only.
Using any other connector may cause fire, a
rise in temperature or damage to the cable
and glasses.
1 Turn off the power of the 3D
glasses.
2 Open the 3D glasses cover and
connect the USB charging cable
supplied with the unit.
Caution
Open the cover.
Supplied USB cable