SONY. Changer Control Audio Master Operating Owner's Record ‘The model name and serial imbiber aze located on the bottom of the nit, Record the serial number ir the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No.
Warning ‘This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FOC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and wised in accordance with the instructions, may cause harmful interference to radio communications.
Table of contents Getting Started Setting the clock CD Player Listening toa CD Pl aging a CO in various modes Cassette Player Listening to a tape. Pl aging a tape in various modes Radio Memorizing stations automatically Best Caning Memory (BTM) Memorizing only desired stations Receiving memorized stations .. Other Functions Using the rotary remote Adjusting the sound characteristics .. Changing the sound and beep tone . With Optional Equipment CD/MD Changer Playing 2 CD/MD..
[ Resetting the unit Before operating the unit for the first ime or after replacing the car battery, yon must reset the unit. Press the reset button with 2 pointed object, such as a ball-point pen. Reset button I e Nate Pressing i reset butter will erase all the memorized pr ogre amid memory functions. Using the decoy cover To deter theft of this unit, use the decoy black ashtray cover when not using your car. I the wit does not extend 6 mem (i ) from the dash el you may ot be able t use the decoy cover.
Listening to a CD Simply insert the CD. Playback starts automatically. La belled side already inserted, press repeatedly until “CD” appears. Elapsed playing time Track number Yo Press Stop playback & or Dejected & Notes * I you cannot insert a CID when the POWER SELECT switch 35 set to @ position, try turning on the power to the radio o cassette first, * You leave the side in the insertion soot for more thaw 15 seconds after pressing &, the disc will reinsert automatically to protect the disc.
EN Playing tracks in random order Shuffle Play Press (D) during playback. “SHUFFLE" appears on the display. Tracks are played in random order. To cancel this mode, press (3 again. Listening to a tape Insert a cassette. S Playback will start automatically. If & cassette is already inserted, press (tw), cp np (TAPEWORM AM < The side facing up is played. The side facing down is played.
Locating the beginning of a track Automatic Music Sensor {(AMS} You can skip up to nine tracks at one time. Dnfifig playback, press either side of momentarily. i To locate the succeeding tracks locate the preceding tracks Note The AMS function may not work when ; » the blanks between tracks are shorter than & seconds. o there is noise bet worn tricks * there are long sections of law volume or guilt sections.
i | LRl slave B Memorizing stations automatically Best Tuning Memory (BYM} This function selects from the currently received band the stations with the strongest signals and memorizes them in order of their frequency. PREVENTING ACCIDENTS! When tuning in while driving, use the automatic tuning or memory preset search function instead of manual fining. 1 Press repeatedly to defect the band. Each time you press (TONERS, the band changes as follows: FM1 —« FM2 — AM1 — AMAZE 2 press for two seconds.
You can connect an optional rotary remote (RM-X25) with this unit. Using the rotary remote The rotary remote works by pressing buttons and /o rotating controls. You can contra the optional CD/MD changer by the rotary remote. By pressing buttons (the SOURCE and the MODE buttons) Every time you press (SOURCE), the source changes as follows: TAPE — TUNER — CO/MD Pressing changes the operation In the hollowing ways: « the tape transport direction. the band, FMI ~» FM2 > AMY —» AM2. » the COMDR changer.
EN 10 Changing the operative direction The operative direction of controls is factory preset as in the Illustration below. If you need to mount the rotary remote on the right side of the steering contemn, you can reverse the control’s operative direction. Press for two seconds while pushing in the VOL contra. Adjusting the sound characteristics 1 Select the item you want to adjust by pressing repeatedly.
You can contra two CD or MD changers with this unit. Playing a CD/MD Press unit the desired changer indication appears on the display. CD/MD playback stats, When a CD/MD changer is connected, all the tracks play from the beginning. Selecting CD/MD changers (when several CD/MD changers are connected) Press (DMD) repeatedly to select the deiced CD/MD changer.
R Playing tracks in random order — shuffle play To play the tracks on the current disc in random order Press (3) repeatedly during CO/MD playback until “SHUN 1" appears. To play all the tracks in the current changer in a random order Press () repeatedly during CO/MD playback until “SHUN 2~ appears. To play ail the tracks in both changers in random order Press (3) repeatedly during CO/MD playback until “SHUN 3" appears.
Before playing, clean the discs with an optional Notes on Cassettes cleaning cloth, Wipe each disc from the center Cassette care out. not touch the tape surface of a cassette, a3 D not use solvents such as benzine, thinner, any dirt or dust will contaminate the heads. numerically available cleaners or anti static » Keep cassettes away from equipment with spray intended for analog discs, built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur.
T — Maintenance Fuse Replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the fuse. If the fuse blows, check the power connection and replace the fuse, If the Fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest San dealer.
T T R e——— T — Location of controls Refer to the pages for further details. [i] display window [Z] & {eject for tape) button 6 [3] & (eject for CD) button 5 [ p-BASS dial 10 SPLIT (display mode change/time set} button 4,5, 7,8 11 [6] SOUND button 4, 10 Reset button Press this button when you use this unit for the first time, when you have changed the car battery, or when the buttons of this wit do not faction properly.
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 14 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from kHz with no more than 1 % total harmonic distortion, Other specifications €D player section Sign alto-noise ratio 88 dB Frequency response 10~ 20,000 Hz Wow and flutter Below measurable limit Laser Diode Properties Material Ga alas Wavelength 780 o Emission Du cation Continuous Laser output power Less than 44.
Troubleshooting guide The following checklist will ass unit. st in the correction of most problems you may encounter with your Before going through the checklist below, refer to the operating procedures. General Problem Cautiousness No sound. # Rotate the dial in a clockwise direction to adjust the volume. o Set the fared control to the center position for 2-speaker systems, The contents of the memory « The power cord or battery has been disconnected. have been erased. » The reset button has been pressed.
Error displays (with optional CD/MD changer(s) connected) The following indications will flash for about five seconds and an alarm sound will be heard, Display Cause Solution The disc magazine is not inserted in Inset! the dies magazine with discs the CD/MD changer. into the CD/MD changer. No discus inserted in the disc Take out the magazine and insert a E02 emerge die. The disc is dirty. Clean the disc. The disc s inserted upside down.
Index A Automatic Music Sensor (AMS} 7,11 Automatic tuning 8 Automatic Tuner Activation (ATA) 7 B Balance 10 Bass 10 Beep tone 10 Best Tuning Memory (BTM) § Lank skip 7 < €D playback 5,11 Clock 4 " DE Decoy cover & . DIGITAL D-BASS (D-Bass) 10 Display 5.7.