Operating Instructions

36
7 Operate the Bluetooth device to
connect to this unit.
Bluetooth device name appears and
connection is complete. “ ” or “ ” appears
when the connection is made.
* Passkey may be called “passcode,” “PIN code,” “PIN
number,” “password,” etc., depending on the
Bluetooth device.
Notes
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To enable
detection, disconnect the current connection.
• It may take time to search or connect.
• Depending on the device, the connection
confirmation display may appear before inputting the
passkey.
• The time limit for inputting the passkey differs
depending on the device.
• This unit cannot be connected to a device that
supports only HSP (Head Set Profile).
Connecting
When the ignition is turned to on with the
Bluetooth signal activated, this unit searches for
the last-connected Bluetooth device, and
connection is made automatically if possible.
This chapter explains how to connect manually
to registered Bluetooth devices.
Before starting, be sure to activate the Bluetooth
signal both on this unit (page 41) and the other
Bluetooth device.
To connect from the other Bluetooth
device
Operate the other Bluetooth device to connect to
this unit.
When connection is made successfully, or
appears at the top of the display.
Note
If connection is made during audio streaming, noise
may occur over playback sound.
Tip
You can connect a cellular phone for audio streaming
if it supports A2DP (Advanced Audio Distribution
Profile).
Handsfree calling
Once the unit is connected to the cellular phone,
you can make/receive handsfree calls by
operating this unit.
Making calls
By dialing a phone number
1 Press (HOME), then touch “Phone.”
The Bluetooth Phone display appears.
2 Touch .
The number input display appears.
3 Touch the number keys to enter the
phone number, then touch .
To delete an entered number, touch .
The call is made and the calling display
appears until the other party answers.
By the phonebook
For details on how to manage the phonebook
data, see “Phonebook management” on page 38.
1 Press (HOME), then touch “Phone.”
The Bluetooth Phone display appears.
2 Touch .
The phonebook appears.
3 Select the desired contact.
1In the name list, touch the name of the
contact.
2In the number list, touch the phone
number.
To search the desired contact by alphabetical
order, touch , then select alphabet.
The contact confirmation display appears.
4 Touch .
The call is made and the calling display
appears until the other party answers.
Tip
You can also browse the phonebook of the connected
cellular phone on this unit and make a call (page 39).