Operating Instructions

44
Adjusting the speaker volume
You can adjust the volume level of each
connected speaker.
The adjustable speakers are “Front R” (Front
Right), “Front L” (Front Left), “Surround L”
(Rear Left), “Surround R” (Rear Right) and
“Subwoofer*.”
* Adjustable only when a subwoofer is connected and
“Subwoofer” is set to “ON” (page 50).
1 While no source is selected, press
(HOME), then touch “Settings.”
2 Touch .
The sound setting menu appears.
3 Move the scrollbar up and down, then
touch “4.1ch Speaker Level.”
The setting display appears.
4 Touch the desired item, then +/– to
adjust the level.
Repeat this step to adjust each speaker’s
volume.
To restore the default setting, touch “Reset.”
To return to the previous display, touch .
Monitor Adjustment
Touch panel calibration
Touch panel calibration is required if the
touching position does not correspond with the
proper item.
1 Press (HOME), then touch “Settings.”
2 Touch .
The general setting menu appears.
3 Move the scrollbar up and down, then
touch “Touch Panel Adjust.”
The setting display appears.
4 Touch the targets in sequence.
The calibration is complete.
To cancel calibration, touch “Cancel.”
Adjusting the picture
— Picture EQ
You can adjust the picture to suit the interior
brightness of the car.
The options are indicated below.
“Dynamic”: Vivid picture with bright, clear
colors.
“Standard”: Standard picture.
“Theater”: Brightens the monitor; suitable for
darkly-lit movies.
“Sepia”: Applies a sepia tone to the picture.
“Custom 1,” “Custom 2”: User-adjustable
settings (page 45).
1 During video playback, press (HOME),
then touch “Settings.”
2 Touch .
The Visual Settings menu appears.
3 Touch “Picture EQ.”
The options appear.
4 Touch the desired option.
To return to the previous display, touch .
Notes
• This setting is available only when the parking brake
is set.
• This setting is not available for USB Video.